DEMONSTRATION THAT PHOSPHORESCENT 6-BROMO-2-NAPHTHYL SULFATE CAN BE USED TO PROBE HEME ACCESSIBILITY IN HEME PROTEINS

The phosphorescence properties of 6-bromo-2-naphthyl sulfate (BNS) in aqueous solution were studied. The phosphorescence lifetime is several hundred microseconds and is self-quenched. Although a fluorescent photoproduct is formed from BNS, it does not interfere with the decay properties of triplet-state BNS and its utility as a probe of the accessibility of the heme group in heme proteins. Quenching of BNS phosphorescence does not occur for the non-heme protein lysozyme and apomyoglobin but occurs by a dynamic mechanism with a quenching constant of 1-2 x 10(9) M-1 s-1 for cytochrome c and myoglobin and with a quenching constant of 6.2 x 10(9) M-1 s-1 for protoporphyrin IX. The phosphorescence of an inclusion complex of 1-bromonaphthalene and beta-cyclodextrin is not quenched by heme-containing proteins. The temperature and viscosity dependencies of the rate with which BNS phosphorescence is quenched by microperoxidase-11 are consistent with unit quenching efficiency. These results indicate that quenching of BNS phosphorescence occurs only upon contact with the quencher, and the quenching constant can be used to assess the degree of accessibility of the heme group.     

Carbohydrate-binding module O-mannosylation alters binding selectivity to cellulose and lignin

Improved understanding of the effect of protein glycosylation is expected to provide the foundation for the design of protein glycoengineering strategies. In this study, we examine the impact of O-glycosylation on the binding selectivity of a model Family 1 carbohydrate-binding module (CBM), which has been shown to be one of the primary sub-domains responsible for non-productive lignin binding in multi-modular cellulases. Specifically, we examine the relationship between glycan structure and the binding specificity of the CBM to cellulose and lignin substrates. We find that the glycosylation pattern of the CBM exhibits a strong influence on the binding affinity and the selectivity between both cellulose and lignin. In addition, the large set of binding data collected allows us to examine the relationship between binding affinity and the correlation in motion between pairs of glycosylation sites. Our results suggest that glycoforms displaying highly correlated motion in their glycosylation sites tend to bind cellulose with high affinity and lignin with low affinity. Taken together, this work helps lay the groundwork for future exploitation of glycoengineering as a tool to improve the performance of industrial enzymes.

Improved understanding of the effect of protein glycosylation is expected to provide the foundation for the design of protein glycoengineering strategies.

The cell walls of terrestrial plants primarily comprise the polysaccharides cellulose, hemicellulose, and pectin, as well as the heterogeneous aromatic polymer, lignin. In nature, carbohydrates derived from plant polysaccharides provide a massive carbon and energy source for biomass-degrading fungi, bacteria, and archaea, which together are the primary organisms that recycle plant matter and are a critical component of the global carbon cycle. Across the various environments in which these microbes break down lignocellulose, a few known enzymatic and chemical systems have evolved to deconstruct polysaccharides to soluble sugars.^1–6 These natural systems are, in several cases, being evaluated for industrial use to produce sugars for further conversion into renewable biofuels and chemicals.From an industrial perspective, overcoming biomass recalcitrance to cost-effectively produce soluble intermediates, including sugars for further upgrading remains the main challenge in biomass conversion. Lignin, the evolution of which in planta provided a significant advantage for terrestrial plants to mitigate microbial attack, is now widely recognized as a primary cause of biomass recalcitrance.⁷ Chemical and/or biological processing scenarios of lignocellulose have been evaluated⁸ and several approaches have been scaled to industrial biorefineries to date. Many biomass conversion technologies overcome recalcitrance by partially or wholly removing lignin from biomass using thermochemical pretreatment or fractionation. This approach enables easier polysaccharide access for carbohydrate-active enzymes and/or microbes. There are however, several biomass deconstruction approaches that employ enzymes or microbes with whole, unpretreated biomass.^9,10 In most realistic biomass conversion scenarios wherein enzymes or microbes are used to depolymerize polysaccharides, native or residual lignin remains.^11,12 It is important to note that lignin can bind and sequester carbohydrate-active enzymes, which in turn can affect conversion performance.¹³Therefore, efforts aimed at improving cellulose binding selectivity relative to lignin have emerged as major thrusts in cellulase studies.^14–25 Multiple reports in the past a few years have made exciting new contributions to our collective understanding of how fungal glycoside hydrolases, which are among the most well-characterized cellulolytic enzymes given their importance to cellulosic biofuels production, bind to lignin from various pretreatments.^15,17 Taken together, these studies have demonstrated that the Family 1 carbohydrate-binding modules (CBMs) often found in fungal cellulases are the most relevant sub-domains for non-productive binding to lignin,^15,17,20,26 likely due to the hydrophobic face of these CBMs that is known to be also responsible for cellulose binding (Fig. 1).²⁷Open in a separate windowFig. 1Model of glycosylated CBM binding the surface of a cellulose crystal. Glycans are shown in green with oxygen atoms in red, tyrosines known to be critical to binding shown in purple, and disulfide bonds Cys8–Cys25 and Cys19–Cys35 in yellow.Furthermore, several studies have been published recently using protein engineering of Family 1 CBMs to improve CBM binding selectivity to cellulose with respect to lignin. Of particular note, Strobel et al. screened a large library of point mutations in both the Family 1 CBM and the linker connecting the catalytic domain (CD) and CBM.^21,22 These studies demonstrated that several mutations in the CBM and one in the linker led to improved cellulose binding selectivity compared to lignin. The emerging picture is that the CBM-cellulose interaction, which occurs mainly as a result of stacking between the flat, hydrophobic CBM face (which is decorated with aromatic residues) and the hydrophobic crystal face of cellulose I, is also likely the main driving force in the CBM-lignin interaction given the strong potential for aromatic–aromatic and hydrophobic interactions.Alongside amino acid changes, modification of O-glycosylation has recently emerged as a potential tool in engineering fungal CBMs, which Harrison et al. demonstrated to be O-glycosylated.^28–31 In particular, we have revealed that the O-mannosylation of a Family 1 CBM of Trichoderma reesei cellobiohydrolase I (TrCel7A) can lead to significant enhancements in the binding affinity towards bacterial microcrystalline cellulose (BMCC).^30,32,33 This observation, together with the fact that glycans have the potential to form both hydrophilic and hydrophobic interactions with other molecules, led us to hypothesize that glycosylation may have a unique role in the binding selectivity of Family 1 CBMs to cellulose relative to lignin and as such, glycoengineering may be exploited to improve the industrial performance of these enzymes. To test this hypothesis, in the present study, we systematically probed the effects of glycosylation on CBM binding affinity for a variety of lignocellulose-derived cellulose and lignin substrates and investigated routes to computationally predict the binding properties of different glycosylated CBMs.     

Evidence for a size dependent nucleation mechanism in solid state polymorph transformations

This study applies aimless shooting and likelihood maximization to determine the molecular mechanism in the solid state polymorph transformation in terephthalic acid from over 500 candidate order parameters. The crystals examined here extend the range of crystal sizes considered in our previous work (J. Amer. Chem. Soc. 2007, 129, 4714) and reveal a change in the mechanism with increasing system size. As the crystal size increases beyond that studied in our previous work, the polymorph transformation mechanism changes from a global distortion of the crystal to a local corner nucleation mechanism. In the corner nucleation mechanism, the interfacial area between the two polymorphs is minimized for a given nucleus size. However, this mechanism differs from classical nucleation theory in that the molecular level details are essential to describe the nucleation process, which involves nonspherical domains at the corner of the crystal. These new findings suggest that there is a range of sizes for which corner nucleation is the dominant mechanism of polymorph transitions, thus implying that different mechanistic regimes exist for nucleation based on crystal size. From a computational standpoint, this study demonstrates the utility of aimless shooting and likelihood maximization to identify nonintuitive reaction coordinates in complex systems.     

Resonant effects in evanescent wave scattering of polydisperse colloids

Measurements and predictions are reported to understand large variations in evanescent wave (EW) scattering intensities between different particles from the same batch of single mode, polydisperse colloids. Measured EW scattering intensity distributions are obtained for three different micrometer sized latex particles irreversibly deposited onto glass surfaces. Predicted EW scattering intensity distributions are obtained using measured particle size distributions as input in a Mie theory for the three-dimensional scattering of a sphere under EW illumination. Good agreement is observed between measured and predicted EW scattering intensity distributions using no adjustable parameters. Our results indicate how finite polydispersity together with resonant effects produce large, nonlinear intensity variations between particles that appear to be physically and chemically uniform. Our findings allow such resonant effects to be understood and exploited in EW based particle-surface characterization techniques (e.g., using total internal reflections, surface plasmons) and chemical and biomolecular sensing applications (e.g., using whispering gallery modes).     

Evanescent wave excited luminescence from levitated quantum dot modified colloids

Evanescent wave excited luminescence of quantum dot modified polystyrene (QDPS) colloids is investigated to measure potential energy profiles of QDPS colloids electrostatically levitated above a planar glass surface. Luminescence is characterized for three different-sized PS colloids modified with three different-sized QDs using confocal microscopy, emission spectra, flow cytometry, and temporal measurements of levitated and deposited colloids. Colloid-surface potential energy profiles constructed from scattering and luminescence intensity data display excellent agreement with each other, theoretical predictions, and independently measured parameters. QDPS luminescence intensity is indirectly confirmed to have an exponential dependence on height similar to conventional colloidal evanescent wave scattering. Our findings indicate that evanescent wave excited QDPS luminescence could enable total internal reflection microscopy measurements of index-matched hard spheres, multiple specific biomolecular interactions via spectral multiplexing, enhanced morphology-dependent resonance modes, and integrated evanescent wave-video-confocal microscopy experiments not possible with scattering.     

Sorption isotherm measurements by NMR

An experimental setup is described for the automated recording of sorption isotherms by NMR experiments at precisely defined levels of relative humidity (RH). Implementation is demonstrated for a cotton fabric; Bloch decays. T1 and T2* relaxation times were measured at predefined steps of increasing and decreasing relative humidities (RHs) so that a complete isotherm of NMR properties was obtained. Bloch decays were analyzed by fitting to relaxation functions consisting or a slow- and a fast-relaxing component. The fraction of slow-relaxing component was greater than the fraction of sorbed moisture determined from gravimetric sorption data. The excess slow-relaxing component was attributed to plasticized segments of the formerly rigid cellulose matrix. T1 and T2* sorption isotherms exhibit hysteresis similar to gravimetric sorption isotherms. However, correlating RH to moisture content (MC) reveals that both relaxation constants depend only on MC, and not on the history of moisture exposure.     

Protein allostery at the solid-liquid interface: endoglucanase attachment to cellulose affects glucan clenching in the binding cleft

At phase boundaries, physical activities of enzymes such as substrate complexation play critical roles in driving biocatalysis. A prominent example is the cellulase cocktails secreted by fungi and bacteria for deconstructing crystalline cellulose in biomass into soluble sugars. At interfaces, molecular mechanisms of the physical steps in biocatalysis remain elusive due to the difficulties of characterizing protein action with high temporal and spatial resolution. Here, we focus on endoglucanase I (Cel7B) from the fungus Trichoderma reesei that hydrolyzes glycosidic bonds on cellulose randomly. We employ all-atom molecular dynamics (MD) simulations to elucidate the interactions of the catalytic domain (CD) of Cel7B with a cellulose microfibril before and after complexing a glucan chain in the binding cleft. The calculated mechanical coupling networks in Cel7B-glucan and Cel7B-microfibril complexes reveal a previously unresolved allosteric coupling at the solid-liquid interface: attachment of the Cel7B CD to the cellulose surface affects glucan chain clenching in the binding cleft. Alternative loop segments of the Cel7B CD were found to affix to intact or defective surface structures on the microfibril, depending on the complexation state. From a multiple sequence alignment, residues in surface-affixing segments show strong conservation, highlighting the functional importance of the physical activities that they facilitate. Surface-affixing residues also demonstrate significant sequence correlation with active-site residues, revealing the functional connection between complexation and hydrolysis. Analysis of the Cel7B CD exemplifies that the mechanical coupling networks calculated from atomistic MD simulations can be used to capture the conservation and correlation in sequence alignment.     

Molecular recognition in methanol: the first example of hydrogen-bond-mediated self-association of a calix[4]arene in polar,protic solvent

Tetraalaninecalixarene was prepared by coupling of tetraaminocalix[4]arene with alanine. It dimerizes in methanol, providing the first example of a substituted calixarene that undergoes self-association through hydrogen bonding in polar, protic solvent. The association constant in 24:1 MeOH:H2O was determined to be 29 000 M-1. Addition of arginine or lysine results in disruption of the dimer and formation of a 1:1 complex between the amino acid and the tetraalaninecalixarene. The preparation of a peptidocalixarene that associates in polar solvent opens new doors for the use of calixarenes for molecular recognition in biologically relevant environments.