Interfacial solubilization of model amphiphilic molecules in block copolymer micelles

We investigate the solubilization of 2-nitrodiphenylamine, a hydrophobic but polar dye molecule, in aqueous solutions of polystyrene(310)-b-poly(acrylic acid)(47) micelles. The solubilization capacity of the micelles, which consist of a polystyrene core and poly(acrylic acid) corona, and the micelle-water partition coefficient are evaluated as a function of the solubilizate concentration. The solubilization isotherm shows a nonlinear behavior, and the partition coefficient, instead of being constant, is strongly dependent on the dye concentration. These results are explained by treating solubilization as a binding process, and by fitting the data to a Langmuir adsorption model. In addition, we examine the locus of solubilization of 2-nitrodiphenylamine using its solvatochromic properties and solubility in model solvents, and we identify the micellar interface as the solubilization site. Confirmatory studies, including the dependence of solubilization on the interfacial area of the aggregates, the role of the poly(acrylic acid) corona chains in stabilizing the solubilized molecules, and the effect of the solubilizate structure on the extent of incorporation, were also conducted. The results, consistent with surface localization, show that solubilization is dependent on the interfacial area of the aggregates, and on the affinity of the solubilizate for the micellar interface.     

Synthesis of spermidinylcholestanol and spermidinylcholesterol, squalamine analogues

Several novel squalamine-related polyaminosterols are reported. The synthesis of 7α-N-[3N-(4-aminobutyl)aminopropyl]aminocholestanol I, 6α-N-[3N-(4-aminobutyl)aminopropyl]aminocholestanol II, 7α and 7β-N-[3N-(4-aminobutyl)aminopropyl]aminocholesterol (III and IV), was accomplished from cholesterol, they provide the first examples in which spermidine is introduced in the B steroidal ring. These molecules showed comparable antibacteria and fungi activities to squalamine, and were cytotoxic on a human non-small cell bronchopulmonary carcinoma line (NSCLC-N6). Therefore, these molecules with antibiotic and cytotoxic activities are promising for immune-compromised patients in cancer chemotherapy.     

Control of amphiphilic block copolymer morphologies using solution conditions

It is well known that the morphology of block copolymer aggregates depends on polymer properties such as the molecular weight, the relative block length, and the chemical nature of the repeat unit. Recently, we have shown that if aggregates are allowed to self-assemble in solution, then in addition to the above factors, a high degree of control over the aggregate architecture can be achieved by adjusting the solution conditions. Factors such as the water content in the solvent mixture, the solvent nature and composition, the presence of additives (ions, surfactants, and homopolymer) and the polymer concentration were successfully employed to control the aggregate shape and size. In this paper, we review a series of studies performed in our group to show how solution properties can control the architecture of aggregates prepared from a given copolymer. The control mechanism is explained in terms of the effect of each property on the forces that govern the formation of any given morphology, namely the core-chain stretching, corona-chain repulsion and interfacial tension. Received 30 April 2002 and Received in final form 3 September 2002 Published online: 21 January 2003     

Enhanced reversible lithium storage in a nanosize silicon/graphene composite

Si/graphene composite was prepared by simply mixing of commercially available nanosize Si and graphene. Electrochemical tests show that the Si/graphene composite maintains a capacity of 1168 mAh g^?1 and an average coulombic efficiency of 93% up to 30 cycles. EIS indicates that the Si/graphene composite electrode has less than 50% of the charge-transfer resistance compared with nanosize Si electrode, evidencing the enhanced ionic conductivity of Si/graphene composite. The enhanced cycling stability is attributed to the fact that the Si/graphene composite can accommodate large volume charge of Si and maintain good electronic contact.     

A conductive crosslinked graphene/cytochrome c networks for the electrochemical and biosensing study

The direct electrochemistry of catalytically active cytochrome C (Cyt c) adsorbed together with a 3-dimensional network of chemically synthesized graphene on glassy carbon electrode has been readily obtained in aqueous phosphate buffer. Direct electrical communication between the redox center of Cyt c and the modified graphene-based electrode was established. The modified electrode was employed as a high-performance hydrogen peroxide (H₂O₂) biosensor. The Cyt c present in modified electrode exhibited a pair of quasi-reversible redox peaks with a midpoint potential of ?0.380 and ?0.2 V, cathodic and anodic, respectively. Investigations into the electrocatalytic activity of the modified electrode upon hydrogen peroxide exposure revealed a rapid amperometric response (5 s). Under optimized conditions, the linear range of response to H₂O₂ concentration ranged from 5 × 10^?7 to 2 × 10^?4 M with a detection limit of 2 × 10^?7 M at a signal-to-noise ratio of 3. The stability, reproducibility, and selectivity of the proposed biosensor are discussed in relation to the morphology and composition of the modified electrode.     

Active loading and tunable release of doxorubicin from block copolymer vesicles

Vesicles are spherical bilayers that offer a hydrophilic reservoir, suitable for the incorporation of water-soluble molecules, as well as a hydrophobic wall that protects the loaded molecules from the external solution. The permeability of a vesicle wall made from polystyrene can be enhanced by adding a plasticizer such as dioxane. Tuning the wall permeability allows loading and release of molecules from vesicles to be controlled. In this study, vesicles are prepared from polystyrene(310)-b-poly(acrylic acid)(36) and used as model carriers for doxorubicin (DXR), a weak amine and a widely used anticancer drug. To increase the wall permeability, different amounts of dioxane are added to the vesicle solution. A pH gradient is created across the vesicle wall (inside acidic) and used as an active loading method to concentrate the drug inside the vesicles. The results show that a pH gradient of ca. 3.8 units can enhance the loading level up to 10-fold relative to loading in the absence of the gradient. After loading, the release of DXR from vesicles is followed as a function of the wall permeability. The diffusion coefficient of doxorubicin through polystyrene (D) is evaluated from the initial slope of the release curves; the value of D ranges from 8 x 10(-17) to 6 x 10(-16) cm(2)/s, depending on the degree of plasticization of the vesicle wall.     

Polystyrene-b-poly(acrylic acid) vesicle size control using solution properties and hydrophilic block length

Polymeric vesicles have attracted considerable attention in recent years, since they are a model for biological membranes and have versatile structures with several practical applications. In this study, we prepare vesicles from polystyrene-b-poly(acrylic acid) block copolymer in dioxane/water and dioxane/THF/water mixtures. We then examine the ability of additives (such as NaCl, HCl, or NaOH), solvent composition, and hydrophilic block length to control vesicle size. Using turbidity measurements and transmission electron microscopy (TEM) we show that larger vesicles can be prepared from a given copolymer by adding NaCl or HCl, while adding NaOH yields smaller vesicles. The solvent composition (ratio of dioxane to THF, as well as the water content) can also determine the vesicle size. From a given copolymer, smaller vesicles can be prepared by increasing the THF content in the THF/dioxane solvent mixture. In a given solvent mixture, vesicle size increases with water content, but such an increase is most pronounced when dioxane is used as the solvent. In THF-rich solutions, on the other hand, vesicle size changes only slightly with the water concentration. As to the effect of the acrylic acid block length, the results show that block copolymers with shorter hydrophilic blocks assemble into larger vesicles. The effect of additives and solvent composition on vesicle size is related to their influence on chain repulsion and aggregation number, whereas the effect of acrylic acid block length occurs because of the relationship among the block length, the width of the molecular weight distribution, and the stabilization of the vesicle curvature.     

Strong Interplay between the Electron Spin Lifetime in Chemically Synthesized Graphene Multilayers and Surface‐Bound Oxygen

The electron spin lifetime in an assembly of chemically synthesized graphene sheets was found to be extremely sensitive to oxygen. Introducing small concentrations of physisorbed O₂ onto the graphene surface reduced the exceptionally long 140 ns electron spin lifetime by an order of magnitude. This effect was completely reversible: Removing the O₂ by using a dynamic vacuum restored the spin lifetime. The presence of covalently bound oxygen also decreased the electron spin lifetime in graphene, although to a far lesser extent compared to physisorbed O₂. The conduction electrons in graphene were found to play a significant role by counter‐balancing the spin depolarization caused by oxygen molecules. Our results highlight the importance of chemical environment control and device packing in practical graphene‐based spintronic applications.     

Indium- or Zinc-Mediated One-Pot Synthesis of Homoallylamines, beta-Amino Esters, and beta-Amino Nitriles

Homoallylamines, beta-amino esters, and beta-amino nitriles were obtained in a one-pot synthesis directly from an aldehyde and a secondary amine such as dibenzylamine or diallylamine. Their condensation with titanium(IV) isopropoxide generates an intermediate aminoalkoxy titanium complex. Further reaction in THF with nucleophilic organometallic species, generated in situ from indium or zinc and a reactive halide (allyl bromide, alkyl bromo- or iodoacetate, iodoacetonitrile), furnished the corresponding amines.     

Adsorption and desorption characteristics of 3-dimensional networks of fused graphene

Here we explore the exceptional structural characteristics of a set of graphene-related materials prepared by a wet chemical approach. We present a comprehensive study of the effects of morphology, sonication, temperature, probe species, and stacking behaviour on the measurement of graphene surface area. Nitrogen gas was used in the solid state gas adsorption measurements and methylene blue dye for adsorption measurements on aqueous dispersions of graphene. The surface area values obtained are among the highest reported for synthetic graphenes: 1700 m² g^? 1 in aqueous dispersions and 612 m² g^? 1 in the solid state. Microscopy revealed the graphene used in the study was present in large part as free sheets and electron diffraction confirmed the successful synthesis of high quality graphene with a regular C–C bond length of 1.41 ± 0.02 Å.