A Novel Chemo‐selective Epoxidation across Acrylate Ester: Synthesis of New Water‐Soluble Forskolin Analogues

While removing the TBDMS group from OH protection, a novel epoxidation reaction occurred across acrylate ester attached to a forskolin fragment. Besides spectroscopic data, the epoxide formation was confirmed by ring opening with a secondary amine. This unique epoxidation reaction, to our knowledge, is not known in the literature. This reaction led us to discover a simple deblocking protocol. The epoxide and the desired Michael substrates were used to introduce imidazole into forskolin.     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

Chitosan-Modified Carbon Nanotubes-Based Platform for Low-Density Lipoprotein Detection

We have fabricated an immunosensor based on carbon nanotubes and chitosan (CNT-CH) composite for detection of low density lipoprotein (LDL) molecules via electrochemical impedance technique. The CNT-CH composite deposited on indium tin oxide (ITO)-coated glass electrode has been used to covalently interact with anti-apolipoprotein B (antibody: AAB) via a co-entrapment method. The biofunctionalization of AAB on carboxylated CNT-CH surface has been confirmed by Fourier transform infrared spectroscopic and electron microscopic studies. The covalent functionalization of antibody on transducer surface reveals higher stability and reproducibility of the fabricated immunosensor. Electrochemical properties of the AAB/CNT-CH/ITO electrode have been investigated using cyclic voltammetric and impedimetric techniques. The impedimetric response of the AAB/CNT-CH/ITO immunoelectrode shows a high sensitivity of 0.953?Ω/(mg/dL)/cm² in a detection range of 0–120 mg/dL and low detection limit of 12.5 mg/dL with a regression coefficient of 0.996. The observed low value of association constant (0.34 M^–1s^–1) indicates high affinity of AAB/CNT-CH/ITO immunoelectrode towards LDL molecules. This fabricated immunosensor allows quantitative estimation of LDL concentration with distinguishable variation in the impedance signal.     

Photoluminescence properties of Gd:ZnO nano phosphor

Journal of Sol-Gel Science and Technology - Gd (0.1, 0.5, 1.0?mol%) doped ZnO nano phosphor, prepared by wet chemical method followed by sintering in air at 700?°C, was...     

Electrophoretically deposited polyaniline nanotubes based film for cholesterol detection

Polyaniline nanotube (PANI-NT) based films have been fabricated onto indium-tin-oxide (ITO) coated glass plates via electrophoretic technique. These PANI-NT/ITO electrodes have been utilized for covalent immobilization of cholesterol oxidase (ChOx) using glutaraldehyde (Glu) as cross-linker. Structural, morphological and electrochemical characterization of PANI-NT/ITO electrode and ChOx/Glu/PANI-NT/ITO bioelectrode have been done using FT-IR spectroscopy, SEM, electrochemical impedance spectroscopy and cyclic voltammetry techniques. Response studies of the ChOx/Glu/PANI-NT/ITO bioelectrode have been carried out using both linear sweep voltammetry and UV-Visible spectrophotometry. The results of the biosensing studies reveal that this bioelectrode can be used to detect cholesterol in wide detection range of 25-500 mg/dL with high sensitivity of 3.36 mA mg(-1) dL and fast response time of 30 s at pH 7.4. This bioelectrode exhibits very low value of Michaelis-Menten constant of 1.18 mM indicating enhanced interactions between cholesterol and ChOx immobilized onto this nanostructured PANI matrix.     

Citrate - Nitrate route for the synthesis and characterization of TAG using sol-gel techniques

Terbium Aluminum Garnet (TAG) is an important optically active material and is one of the best materials known for the fabrication of optical isolators. TAG has a large Verdet constant and has good transmission in the region of 350–1500 nm of the electromagnetic spectrum. It is also known that TAG melts incongruently at 1840°C. This makes efficient synthesis of TAG important and challenging and forms the motivation of the present work to develop techniques for the synthesis of TAG at lower temperatures. In the present work we report the synthesis of TAG using sol-gel techniques following the citrate-nitrate route. The prepared sample is sintered at various temperatures in presence of air and characterized using X-ray diffraction, FT-IR spectroscopy, energy dispersive X-ray Analysis and the morphology is observed using the scanning electron microscopy.     

Absorption and laser excited fluorescence of Ho3+:LaF3

Pramana - The absorption and fluorescence spectra of Ho3+:LaF3, in the wavelength region from 4000 Å to 7500 Å have been reinvestigated incorporating polarization features, for the first...     

Chitosan–iron oxide nanobiocomposite based immunosensor for ochratoxin-A

The rabbit immunoglobulin antibodies (IgGs) have been immobilized onto nanobiocomposite film of chitosan (CH)–iron oxide (Fe₃O₄₎ nanoparticles prepared onto indium–tin oxide (ITO) electrode for detection of ochratoxin-A (OTA). Excellent film forming ability and availability of –NH₂ group in CH and affinity of surface charged Fe₃O₄ nanoparticles for oxygen support the immobilization of IgGs. Differential pulse voltammettry (DPV) studies indicate that Fe₃O₄ nanoparticles provide increased electroactive surface area for loading of IgGs and improved electron transport between IgGs and electrode. IgGs/CH–Fe₃O₄ nanobiocomposite/ITO immunoelectrode exhibits improved characteristics such as low detection limit (0.5 ng dL⁻¹), fast response time (18 s) and high sensitivity (36 μA/ng dL⁻¹ cm⁻²) with respect to IgGs/CH/ITO immunoelectrode.