Production of carrier-free scandium radioisotopes from a neutron-irradiated potassium titanium oxalate target

Summary Extraction of scandium and calcium radioactivities with 1% HDEHP in benzene from nitric acid solution was investigated. The effect of potassium titanium oxalate concentration on the extraction from 1.5M nitric acid was studied. From the data obtained, two procedures based on batch solvent extraction and extraction chromatography were developed for separation and production of radioscandium from a neutron-irradiated potassium titanium oxalate target. The radiochemical purity of the separated scandium radioactivities was more than 98%.

---

Zusammenfassung Die Extraktion der Aktivitäten des Scandiums und Calciums aus salpetersaurer Lösung mit 1% Diäthylhexylphosphorsäure in Benzol wurde untersucht. Der Einfluß der Kalium-Titanoxalat-Konzentration auf die Extraktion aus 1,5-m Salpetersäure wurde geprüft. Auf Grund der Ergebnisse wurden zwei Verfahren zur Trennung und Gewinnung von Radio-Scandium aus einem neutronenbestrahlten Kalium-Titanoxalat-Target ausgearbeitet, die auf einmaliger Extraktion mit dem Lösungsmittel bzw. auf Extraktionschromatographie beruhen. Die radiochemische Reinheit der Sc-Aktivitäten war besser als 98%.

     

Synergism in the solvent extraction of samarium by thenoyltrifluoroacetone and triphenyl or trioctyl phosphine oxide mixture

Synergistic extraction of samarium with TTA(HA) and TPPO or TOPO (B) mixtures were investigated. The extracted complex was proved to have the general formula SmA₃ · 2B. A graphical determination for the formation constants of these complexes gave the values 3.9 × 10¹³ and 8.2 × 10¹⁰ for SmA₃ · 2TOPO and SmA₃ · 2TPPO in benzene, respectively.     

Spectrophotometric determination of selenium with dithizone

Microgram amounts of selenium(IV) are determined by measuring the decrease in absorbance of dithizone in carbon tetrachloride solution at 620 nm. Relative standard deviations for samples containing 0.20 and 1.00 μg of selenium(IV) are 0.6% and 0.4%, respectively. Of several metals tested only copper (at the 1.0-μg level) and iron (at the 100-μg level) interfere but high concentrations of nitric or perchloric acid cause low results. A reinvestigation of the reaction of selenium(IV) with dithizone suggests a formula Se(HDz)₄ for the dithizonate.     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

The determination of selenium(IV) by thermometric enthalpy titration with thiosulphate

Selenimn(IV) can be titrated in the range 0.2–6 mg with thiosulphate; relative standard deviations are 1.2–0.54%. Experimental conditions were manipulated to use the endothermic enthalpy of dilution and disproportionation of thiosulphate to advantage in improving end-point precision. Common anions do not interfere; interferences from copper(II), iron(III), lead(II) and mercury(II) can be minimized by masking.     

Investigation Micellar Catalysis of p-Nitrophenyl Acetate Hydrolysis with Mn(Niten)2H2O Complex

In this article, a mononuclear Mn(Niten)2H₂O complex was prepared to catalyze hydrolysis of p-nitrophenyl acetate (PNPA) in presence of Cetyltrimethylammonium bromide (CTAB) micellar system in different pH range from 6.5–10 at 25°C. These results obtained indicate that the complex exhibits good catalytic function. It also appears the complex accelerates the hydrolytic cleavage of PNPA in cationic CTAB micellar solution which may be due to coordinating ability of substrate to complex, electrostatic interaction between micelles and complex and due to electrostatic interaction between micelles with reactant.     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.     

Halide ion effect on the chloroform chemical shift in supramolecular complexation studies with tetra-n-butylammonium salts: a 1H NMR and X-ray study

A ¹H NMR spectroscopic study of tetra-n-butylammonium halides (TBAX: X = Cl^? , Br^?  or I^? ) in CDCl₃ solutions was conducted. Complexation studies of TBAX salts with different host molecules using ¹H NMR in CDCl₃ have previously revealed that the reference residual CHCl₃ proton signal had been shifted downfield. The aim of the study was to quantify the extent of these chemical shift changes with TBAX salts. Linear concentration–chemical shift relationships in each case were obtained from the resulting titration plots obtained from the addition of the TBAX salts alone to CDCl₃. Interactions in the solid state as determined by X-ray crystallography support the solution-state investigations indicating halide ion–chloroform proton interactions.     

LDH-intercalated d-gluconate: Generation of a new food additive-inorganic nanohybrid compound

Intercalation of d-gluconate into the interlamellae of zinc-aluminum-layered double hydroxide for the formation of a food additive-inorganic layered nanohybrid was accomplished by both direct (co-precipitation) and indirect (ion-exchange) methods. Powder X-ray diffraction (PXRD) together with CHNS and Fourier transform infrared (FTIR) analyses showed that the hybridization of d-gluconate with pure phase and good crystallinity was successfully accomplished by a direct method within ranges of pH 7.5-10, Zn to Al initial molar ratio of 2-5 and DG concentration of 0.05-0.3 M. The same nanohybrid compound was also prepared using an indirect ion-exchange method by contacting the pre-prepared LDH with 0.1 M DG for 80 min. The basal spacing of the nanohybrid synthesized by the direct method ranged between 9 and 12.0 Å while that synthesized by the indirect ion-exchange method was 14.0 Å. The crystallinity of the latter was higher than the former and it inherited the crystallinity of the precursor. This work shows that a food additive, such as d-gluconate, can be hybridized into an inorganic host for the formation of a new nanohybrid compound, which can be used to regulate the release of acidity in the food industry.