An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

A novel SBA-15-based fluorescent sensor, SBA-PI: mesoporous SBA-15 structure modified with iminostilbene groups, was designed, synthesized, and characterized by Fourier transform-infrared spectroscopy (FT-IR), ultraviolet–visible spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), low-angle X-ray diffraction techniques (low-angle XRD), and N₂ adsorption–desorption techniques. The SBA-PI as a sensor with a selective behavior for detection of Cu²⁺ comprises iminostilbene carbonyl as the fluorophore group. The SBA-PI sensor displays an excellent fluorescence response in aqueous solutions and the fluorescence intensity quenches remarkably upon addition of Cu²⁺. Other common interfering ions even at high concentration ratio showed either no or very small changes in the fluorescence intensity of SBA-PI in the absence of Cu²⁺. A limit of detection of 8.7 × 10⁻⁹ M for Cu²⁺ indicated that this fluorescence sensor has a high sensitivity and selectivity toward the target copper (II) ion. The fabricated Cu²⁺ sensor was successfully applied for the determination of the Cu²⁺ in human blood samples without any significant interference. With the selective analysis of Cu²⁺ ions down to 0.9 nM in blood, the sensor is a promising and a novel detection candidate for Cu²⁺ and can be applied in the clinical laboratory. A reversibility and accuracy in the fluorescence behavior of the sensor was found in the presence of I^¯ that was described as a masking agent for Cu²⁺.

Graphical abstract

     

Synthesis of novel fluorene-functionalised nanoporous silica and its luminescence behaviour in acidic media

Fluorene-functionalised nanoporous silica (FL-NH₂-SBA-15) was prepared using the post-synthesis grafting method of SBA-15. The material thus obtained was characterised by means of small- and wide-angle X-ray diffraction, nitrogen adsorption-desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and elemental analysis. The results showed that the organised structure is preserved after the post-grafting procedure. Surface area and pore-size decreased by attaching functional groups to the pore surface. In addition, the pore volume was reduced with functionalisation. The amount of fluorene grafted onto the surface of SBA-15 was 0.55 mmol with a yield of approximately 46 %. The emission spectra of FL-NH₂-SBA-15 in acidic media were studied and are discussed in detail. The structural change between FL-NH₂-SBA-15 and the protonated form might be an effective candidate for acid-dependent molecular-sensor models for advanced application in molecular sensors in the future.     

Preparation of a dual-functionalized fumed silica nanoparticle catalysis for synthesis of azaluorenone derivatives

Research on Chemical Intermediates - A dual-functional silica-based catalyst was prepared by treating fumed silica with amino-containing silane then 1,4-butane sultone. The presence of functional...     

A simple and clean method for multicomponent synthesis of spiro [indole-tetrahydropyrano(2,3-d)pyrimidine] derivatives using SBA-Pr-SO3H as catalyst under solvent-free conditions

Sulfonic acid functionalized SBA-15 (SBA-Pr-SO₃H) as a new nanoporous solid acid catalyst was applied in the green one-pot synthesis of spiro[indole-tetrahydropyrano(2,3-d)pyrimidine] derivatives via three-component reaction of isatins, malononitrile or cyanoacetic esters and barbituric acids under solvent-free conditions. SBA-Pr-SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm, which could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused several times without any loss of activity. The advantages of this methodology are high product yields, being environmentally benign, short reaction times, and easy handling.     

Solvent-free one-pot synthesis of 4-aryl-3,5-dimethyl-1,4,7,8-tetrahydrodipyrazolo[3,4-b:4′,3′-e]pyridines using Fe3O4@SiO2@(BuSO3H)3 catalytic Fe3+ system as selective colorimetric

Research on Chemical Intermediates - The synthesis of 4-Aryl-(3,5-dimethyl-1,4,7,8-tetrahydro-dipyrazolo[3,4b:4′,3′e]pyridine derivatives was accomplished using Fe3O4@SiO2@(BuSO3H)3...     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Plasma-Assisted Reaction Chemical Ionization for Elemental Mass Spectrometry of Organohalogens

We present plasma-assisted reaction chemical ionization (PARCI) for elemental analysis of halogens in organic compounds. Organohalogens are broken down to simple halogen-containing molecules (e.g., HBr) in a helium microwave-induced plasma followed by negative mode chemical ionization (CI) in the afterglow region. The reagent ions for CI originate from penning ionization of gases (e.g., N₂) introduced into the afterglow region. The performance of PARCI-mass spectrometry (MS) is evaluated using flow injection analyses of organobromines, demonstrating 5–8 times better sensitivities compared with inductively coupled plasma MS. We show that compound-dependent sensitivities in PARCI-MS mainly arise from sample introduction biases.

Synthesis of CaWO4:Er3+@SiO2 and CaWO4:Tm3+@SiO2 nano-particles via a combustion pathway and study of their optical properties

Use of citric acid as a chelating agent and fuel, ammonium nitrate as fuel, boric acid as flux material and silica as supports, CaWO₄:Ln³⁺@SiO₂ (Ln = Er and Tm) nanoparticles were synthesized via a combustion reaction at 800 °C. Characterization of the samples was performed by X-ray diffractometer (XRD), reflectance UV–Vis spectrophotometer, fluorescence spectrophotometer (PL) and transmission electron microscope (TEM). XRD patterns showed that tetragonal crystalline structure of scheelite and silica supports were formed, and that the formation of a silica support could enhance the luminescence intensity of CaWO₄:Ln³⁺. The reflectance UV–Vis and PL spectra indicated the broad absorption band of WO₄ ^2? groups about 240 nm, the WO₄ ^2? wide excitation band with maximum at 240 nm, a broad emission band of WO₄ ^2? with maximum about 420 nm, and characteristic emissions of Ln³⁺ ions. According to the TEM analysis, CaWO₄:Er³⁺@SiO₂ and CaWO₄:Tm³⁺@SiO₂ nanoparticles have almost the same morphology with average particle sizes about 50 nm.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Application of Sulfonic Acid Functionalized SBA‐15 as a New Nanoporous Acid Catalyst in the Green One‐Pot Synthesis of Spirooxindole‐4H‐pyrans

Sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO₃H) as a new nanoporous solid acid catalyst was applied in the green one‐pot synthesis of spirooxindole‐4H‐pyrans via condensation of isatins, malononitrile or methyl cyanoacetate or ethyl cyanoacetate, and 4‐hydroxycoumarin in water solvent. SBA‐Pr‐SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm that could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused for several times without any loss of activity. The significant merits of present methodology are its simplicity, short reaction time, good yields, and environmentally benign mild reaction condition as water was used as a green solvent.