Electroanalytical and chromatographic determination of pentachlorophenol and related molecules in a contaminated soil: a real case example

Electroanalytical and chromatographic methodologies have been applied for the determination of pentachlorophenol (PCP) and some of its derivatives in real soil samples contaminated by industrial discharge. The analytes were extracted with hexane from soil samples collected at different points of the site and mixed to produce a representative sample. Square wave voltammetry (SWV) experiments were carried out on either a boron-doped diamond (BDD) electrode or a gold ultramicroelectrode (Au-UME) in an analyte composed by the Britton-Robinson (B-R) buffer at pH 5.5 with the direct addition of proper amounts of the extract. The voltammetric responses revealed an irreversible anodic peak at approximately 0.80 V vs. Ag/AgCl with a peak current showing a linear dependence on PCP concentration. This linear relationship yielded a detection limit (DL) of 2×10⁻⁸ mol l⁻¹ (or 5.5 μg l⁻¹) for the BDD electrode and 6.9×10⁻⁸ mol l⁻¹ (18.4 μg l⁻¹) for the Au-UME, while the independently measured HPLC detection limit was 1.1×10⁻⁸ mol l⁻¹ (3.0 μg l⁻¹). The application of electroanalytical and chromatographic methodologies in the analysis of soil extracts revealed, besides the PCP responses, signals for some related molecules such as o-tetrachlorobenzoquinone (o-chloranil), hexachlorobenzene and tetrachlorophenol. Recovering experiments for PCP showed a concentration of 27.5 mg kg⁻¹ for the electroanalytical determinations and 26.8 mg kg⁻¹ for the HPLC analysis, values exceedingly high if considering that the maximum residue limit established for natural waters by the Brazilian Environmental Agency is 10 μg l⁻¹.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Determination of triazine herbicides: development of an electroanalytical method utilizing a solid amalgam electrode that minimizes toxic waste residues, and a comparative study between voltammetric and chromatographic techniques

The use of a copper solid amalgam electrode (CuSAE) for the analytical determination of triazine herbicides (atrazine and ametryne) instead of the conventional hanging mercury drop electrode (HMDE) is reported. The results obtained using electroanalytical methods utilizing each of these electrodes were also compared with those provided by the HPLC technique. The results indicated that the CuSAE electrode can be used to detect the herbicides studied, since the detection limits reached using the electrode (3.06 μg L⁻¹ and 3.78 μg L⁻¹ for atrazine and ametryne, respectively) are lower than the maximum values permitted by CONAMA (Brazilian National Council for the Environment) for wastewaters (50 μg L⁻¹) and by the US EPA (Environmental Protection Agency of the United States) in natural water samples (10.00 μg L⁻¹). An electroanalytical methodology employing CuSAE and square wave voltammetry (SWV) was successfully applied to the determination of atrazine and ametryne in natural water samples, yielding good recoveries (70.30%–79.40%). This indicates that the CuSAE provides a convenient substitute for the HMDE, particularly since the CuSAE minimizes the toxic waste residues produced by the use of mercury in HDME-based analyses.     

Sol-gel coatings for chemical protection of stainless steel

Sol-gel thin coatings of ZrO₂, SiO₂, 70SiO₂-30TiO₂ and 88SiO₂-12Al₂O₃ compositions (mole %) have been prepared from sonocatalyzed sols and deposited by dip-coating technique on 316L stainless steel foils. The influence of the coatings on the chemical corrosion of the substrate has been measured through potentiodynamic polarization curves in aqueous 15% H₂SO₄ solution between 25 and 50°C. The values of the corrosion potential, polarization resistance and corrosion rate have been determined. Analysis of the data combined with scanning electron microscopy studies indicate that the films act as a geometric blocking against exposure to the corrosive media and increase the lifetime of the substrate up to a factor 8.5.     

Determination of electrical double-layer parameters for the adsorption of neutral molecules at the electrode–solution interface

The study of the structure of the electrode–solution interface usually involves the measurement of the differential capacity–potential characteristics of the system. In order to obtain the double-layer parameters from these data, integration and differentiation procedures are required and, for this purpose, the use of computational methods is of great value. Two computer programs have been written for the treatment of data for the adsorption of neutral molecules on electrodes. The programs use the charge density and the electrode potential as the electrical variable, respectively, and, in both cases, the differentiation procedures have been optimized by the use of an adequate numerical function. The advantages of doing a simultaneous analysis on both electrical variables are pointed out.     

Electrochemical Determination of the Antioxidant Capacity: The Ceric Reducing/Antioxidant Capacity (CRAC) Assay

The CRAC assay is a direct electron transfer test of antioxidant capacity for several organic compounds. The ability of eight different compounds in reducing Ce⁴⁺ was studied by chronoamperometric measurements of the remaining Ce³⁺ species. The following antioxidant classification was observed: tannic acid quercetin>rutin>gallic acid≈catechin>ascorbic acid>BHA>Trolox. These results agree with others already published and a good correlation (R²=0.937) was found with the classical spectrophotometric FRAP assay. The CRAC assay is simple, fast, free from sample pretreatment and applicable to nontransparent samples.     

Electroanalytical Determination of N‐Nitrosamines in Aqueous Solution Using a Boron‐Doped Diamond Electrode

The electrochemical methods cyclic and square‐wave voltammetry were applied to develop an electroanalytical procedure for the determination of N‐nitrosamines (N‐nitrosopyrrolidine, N‐nitrosopiperidine and N‐nitrosodiethylamine) in aqueous solutions. Cyclic voltammetry was used to evaluate the electrochemical behaviors of N‐nitrosamines on boron‐doped diamond electrodes. It was observed an irreversible electrooxidation peak located in approximately 1.8 V (vs. Ag/AgCl) for both N‐nitrosamines. The optimal electrochemical response was obtained using the following square‐wave voltammetry parameters: f=250 Hz, E_sw=50 mV and E_s=2 mV using a Britton–Robinson buffer solution as electrolyte (pH 2). The detection and quantification limits determined for total N‐nitrosamines were 6.0×10^?8 and 2.0×10^?7 mol L^?1, respectively.     

Studies of the hydrogen evolution reaction on smooth Co and electrodeposited Ni–Co ultramicroelectrodes

The hydrogen evolution reaction (HER) was studied on smooth Co and on electrodeposited Ni–Co ultramicroelectrodes (UMEs) in alkaline solutions at several temperatures by steady-state polarisation curves. The real electrochemical area was previously estimated by cyclic voltammetry to account for the large difference in roughness factor of the two surfaces. The values obtained for the Tafel slopes were very close to 2.303RT/βnF while the ‘apparent’ energies of activation were 59 and 41 kJ mol⁻¹ for Co and Ni–Co, respectively. A common Volmer–Heyrovsky mechanism with Heyrovsky as the rate-determining step (RDS) was initially proposed. This was confirmed when the experimental results were mathematically treated by a non-linear fitting procedure using the kinetic equations derived for that mechanism. The calculations revealed that Ni–Co is a more efficient catalyst for the HER then pure Co, with a rate constant value of 0.16×10⁻¹⁰ mol s⁻¹ cm⁻² at 25°C for the slow step. Although this value is more than one order of magnitude smaller than that already reported for deposited Ni, it is considerably larger than the one measured here (0.02×10⁻¹⁰ mol s⁻¹ cm⁻²) for pure Co at 25°C.     

The Saul'yev method of digital simulation under derivative boundary conditions

Expressions for implicit boundary concentrations in electrochemical digital simulations are developed for use with the Saul'yev method, for chronopotentiometry and quasi-reversible potential-step chronoamperometry. As with the Crank-Nicolson method, derivative boundary conditions cause very poor performance of the Saul'yev schemes unless algorithms for implicit boundary concentrations are applied. With such algorithms, however, some of the Saul'yev schemes are very efficient.