Rheological properties of binary associating polymers

Dynamics of associating polymer solutions above the reversible gelation point are studied. Each macromolecule consists of a soluble backbone (B) and a small fraction of specific strongly interacting groups (A or C stickers) attached to B. A mixture of B–A and B–C associating polymers with 1:1 stoichiometric ratio is considered. As a result of AC association, the polymers reversibly gelate above the overlap concentration. It is shown that (1) the network strands are linear complexes (double chains) of B–A and B–C; (2) “diffusion” of the network junction points is characterized by an apparent activation energy, which can be significantly higher than the energy of one AC bond; (3) most importantly, the randomness of sticker distribution along the chain can significantly slow down the network relaxation leading to a markedly non-Maxwellian viscoelastic behavior. The theory elucidates the most essential features of rheological behavior of polysaccharide associating systems (with A = adamantyl moiety, C = β-cyclodextrin, B = either chitosan or hyaluronan) including similar behavior of G ^′ and G ^″ in a wide frequency range, strong temperature dependence of the characteristic frequency ω _x , and an extremely strong effect of added free stickers (fC) on the dynamics. This paper was presented at Annual European Rheology Conference (AERC) held in Hersonisos, Crete, Greece, April 27–29, 2006.     

Synthesis, structure, and characterization of new mononuclear Mn(II) complexes. Electrochemical conversion into new oxo-bridged Mn(2)(III,IV) complexes. Role of chloride ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.     

Halonickel(I) complexes

Summary The reduction of nickel(II) halides with NaBH₄ in the presence of different ligands, L=PPh₃, AsPh₃, SbPh₃, has been studied. With a molar ratio L/Ni=3, new complexes NiX(SbPh₃)₃, X=Cl, Br, I, were obtained. With a molar ratio L/Ni=2, dimeric species [NiXL₂]₂, X=Cl, Br, I; L=PPh₃, AsPh₃, SbPh₃, were isolated. They are unstable and decompose easily in the solid and rapidly in solution, so that pure samples were only identified for X=Cl, L=PPh₃, AsPh₃, SbPh₃; X=Br, L=PPh₃ and X=I, L=PPh₃. With a molar ratio L/Ni=1, complexes [NiXL]_n (probably polymeric) were obtained. They are very unstable and pure samples could only be isolated when X=Cl, L=PPh₃. Impure substances containing variable amounts of decomposition products were obtained in all the remaining cases. The chemical and structural behaviour of these complexes is discussed.     

Different spectrophotometric methods for antioxidant activity assay of four Romanian herbs

The present study investigates the antioxidant activities of some Romanian plants, using different spectrophotometric methods (FRAP I, FRAP II, and CUPRAC). The plants investigated are hawthorn (Crataegus oxyacantha), bilberry (Vaccinium myrtillus L.), rosehip (Rosa canina), and chokeberries (Aronia melanocarpa). Hawthorn is used to treat a wide variety of inflammatory conditions, but the primary use is generally restricted for treating hypertension, ischemic heart disease, congestive heart failure, and arrhythmia. Investigations have proved the safe and reliable use of plant and plant extracts for treatment of cardiovascular disorders.     

Novel Capsular Aggregates from Flexible Tripodal Triureas with Cs Symmetry

Tris(2‐ and 3‐ureidobenzyl)amines with C_s symmetry self‐assemble in solution forming mixtures of regioisomeric capsular aggregates, one of which is chiral and the other centrosymmetric. Under certain conditions, a predominance of the centrosymmetric regioisomer is found before equilibrium, that is, a mixture close to the statistical ratio of the two species is reached. In the solid state, there is a preference for the centrosymmetric capsules. Molecular models of both regioisomeric aggregates have been built and analyzed for comparison. Guests inside capsules formed by self‐assembly of desymmetrized tris(3‐ureidobenzyl)amines feel different magnetic environments, depending on whether they are inside a chiral or an achiral regioisomeric container. Of special significance are the experiments with a more flexible triurea endowed with an ureidopropylic arm, which self‐assembles with the same efficiency as the more rigid tris(ureidobenzyl)amines.     

Synthesis of Mixed Alkylphosphites and Alkylphosphates

Some mixed phosphites having two different alkyl chain were obtained as forerunners for mixed phosphates Mixed dialkyl phosphates were obtained in good yields (40-80%) by phase transfer catalysis in liquid-liquid sistem, starting from different dialkyl phosphites and aliphatic alcohols. The reaction conditions were optimized in order to obtain good yields in phosphites and phosphates respectively. Compounds were analyzed by IR, P 31 -NMR.     

Obtaining and characterizing modified tannins by physical-chemical methods

After oxidation of tannins (Tannins 1–3) extracted from grape seeds, Tanoxil compounds with increased solubility and enhanced antioxidant activities were synthesized. In this research, ABTS^+· assay and a chemiluminescence method were used for antioxidant measurement of hydrophilic compounds (Tanoxils 1–3).

It was observed that the antioxidant activity (AA, %) is very similar for the three samples, while at the same time AA is quite high (93.16%–96.48%). The percentage of inhibition by ABTS^+· is higher for Tanoxil 2 (96.4%) as compared to Tannin 2 compound (14.34%). Moreover, the total content (T_CF) of carboxyl and phenolic groups was investigated. T_CF values, determined for Tanoxil products, revealed a double (Tanoxil 1) or triple (Tanoxil 2) increase as compared to the value of the T_CF of Tannin 1. Tanoxil products represent an interest for future research as they have a high AA (96.4%) and the content of acidic groups is significant (T_CF, 0.191 meq g^?1).

Open image in new window

     

Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (R_ct) and double layer capacitance (C_dl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of E_LUMO, E_HOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.     

Polymeric Membranes Containing Phosphorus in the Chain for Solid Polymer Electrolytes

Abstract

Two new series of solid polymer electrolytes (SPEs) based on phosphorus containing (co)polyesters (PPE) and Lithium triflate were obtained. PPEs are composed of phosphonate moeties (cyclohexyldichlorophosphonate (CHDP)) as linking agent and two diols: PEG (6000) and poly(tetramethylene glycol) (PTMG) in PPE I, and PEG (6000) and 4,4′-cyclohexylidenebisphenol (bisphenol Z, BZ) in PPE II. Polycondensation was carried out in solution in the presence of triethylamine (TEA) as scavenger of HCl side product (PPE I–IIa) and in the absence of any acid acceptor (PPE I–IIb). The Limiting Oxygen Index (LOI) and thermal analysis were performed both on polymers and membranes. The ionic conductivity of SPE membranes based on PPE-salt complexes, with various salt concentrations, was investigated at different temperature and ionic transference numbers were determined. Optimum composition was obtained for the polymer which contains in structure only alkyl units and 15% Lithium triflate.     

Rapid Capillary-Assisted Solution Printing of Perovskite Nanowire Arrays Enables Scalable Production of Photodetectors

Despite recent progress in producing perovskite nanowires (NWs) for optoelectronics, it remains challenging to solution-print an array of NWs with precisely controlled position and orientation. Herein, we report a robust capillary-assisted solution printing (CASP) strategy to rapidly access aligned and highly crystalline perovskite NW arrays. The key to the CASP approach lies in the integration of capillary-directed assembly through periodic nanochannels and solution printing through the programmably moving substrate to rapidly guide the deposition of perovskite NWs. The growth kinetics of perovskite NWs was closely examined by in situ optical microscopy. Intriguingly, the as-printed perovskite NWs array exhibit excellent optical and optoelectronic properties and can be conveniently implemented for the scalable fabrication of photodetectors.