Complexation of Macrocyclic Compounds with Silver Ions in Surfactant Media

This paper is a report on the complexation studies of silverions with certain water soluble crown ethers viz., 15-crown-5,18-crown-6, cyclam, diaza 15-crown-5 and certain water insolublecrown ethers viz., benzo 15-crown-5, dibenzodiaza 15-crown-4,dibenzyldiaza 18-crown-6 in some nonionic surfactants viz.,polyoxyethylated alkyl phenol (TX 100), polyoxyethylene (20)sorbiton monolaurate (Tween 20), polyoxyethylene (20) sorbitonmonoleate (Tween 80) and polyoxyethylated glyco monolaurylether (Brij 35) by potentiometry. In addition, conductometry wasalso used to study the complexation of oxa crown ethers to comparethe results obtained by potentiometry, which were found to be ingood agreement with each other. The complexation studies indicate1:1 complex formation between the silver ion and macrocycle, thelog_ML ⁿ⁺ values being in the range 1 to 9.     

Structure, reactivity and aromaticity of acenes and their BN analogues: a density functional and electrostatic investigation

Density functional calculations have been carried out on a series of linearly annelated acenes and their BN analogues. Even though borazine shows aromatic and reactivity behavior parallel with that of benzene, its condensed derivatives show patterns different from those of their hydrocarbon analogues. Nucleus independent chemical shift (NICS) values in acenes suggest that the aromaticity of the inner rings is more than that of benzene, whereas in BN-acenes there is no substantial change in the aromaticity of the individual rings. Molecular electrostatic potential (MESP) is employed to obtain further insights into the bonding and reactivity trends for these systems. The MESP topography patterns of acenes and BN-acenes are substantially different, with BN-acenes showing more localized pi electron features compared to those of acenes. The MESP values at the critical points (CPs) indicate overall lowering of aromaticity in these annelated systems. However, this change is gradual among the BN-acenes.     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

LC–MS Determination of Gabapentin from Human Plasma

Gabapentin is an anticonvulsant drug used for the treatment of epilepsy. It is not bound to plasma protein and is not metabolized. A high performance liquid chromatography–mass spectrometric micro method is described in this report for its determination from human plasma. Chromatography was performed on a 50 × 4.6 mm, 4 μm nitrile column and the parent ion detected in the positive ionization mode on single quadrupole analyzer (Q1MI) with atmospheric pressure ionization source. Extraction was carried out on C₁₈, 100 mg/3cc cartridge using 10 μL sample volume. The mean extraction recovery was 97% and within batch and between batch coefficients of variation were <9%. Lack of interference from endogenous substances helped in achieving a highly sensitive method without the need for monitoring fragment ions. The lowest concentration injected on column for calibration curve was 195 pg (range 0.5–64 ng). The method was applied for analysis of samples from a cross-over bio-equivalence study comparing two formulations.     

Army ants algorithm for rare event sampling of delocalized nonadiabatic transitions by trajectory surface hopping and the estimation of sampling errors by the bootstrap method

The most widely used algorithm for Monte Carlo sampling of electronic transitions in trajectory surface hopping (TSH) calculations is the so-called anteater algorithm, which is inefficient for sampling low-probability nonadiabatic events. We present a new sampling scheme (called the army ants algorithm) for carrying out TSH calculations that is applicable to systems with any strength of coupling. The army ants algorithm is a form of rare event sampling whose efficiency is controlled by an input parameter. By choosing a suitable value of the input parameter the army ants algorithm can be reduced to the anteater algorithm (which is efficient for strongly coupled cases), and by optimizing the parameter the army ants algorithm may be efficiently applied to systems with low-probability events. To demonstrate the efficiency of the army ants algorithm, we performed atom-diatom scattering calculations on a model system involving weakly coupled electronic states. Fully converged quantum mechanical calculations were performed, and the probabilities for nonadiabatic reaction and nonreactive deexcitation (quenching) were found to be on the order of 10(-8). For such low-probability events the anteater sampling scheme requires a large number of trajectories ( approximately 10(10)) to obtain good statistics and converged semiclassical results. In contrast by using the new army ants algorithm converged results were obtained by running 10(5) trajectories. Furthermore, the results were found to be in excellent agreement with the quantum mechanical results. Sampling errors were estimated using the bootstrap method, which is validated for use with the army ants algorithm.     

Helical water chains in aquapores of organic hexahost: remarkable halogen-substitution effect on the handedness of water helix

Water helices surrounding the nano-channels of trichlorophloroglucinol and tribromophloroglucinol have different handedness, PMPMPM and PPPMMM (P = right-handed, M = left-handed), depending on halogenhalogen interactions between the host molecules.     

Simultaneous purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis on a hydrophobic support

Purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis could be simultaneously accomplished by hydrophobic interaction on Phenyl Sepharose CL-4B in the presence of 50 mM pyrophosphate buffer (pH 8.5). The presence of a high salt concentration of 2M, which is generally required for the hydrophobic interactions, was not essential for the hydrophobic immobilization. The enzyme in free as well as immobilized form was optimally active between pH 7.0 and 9.0. The immobilized preparation could be reused in a batch process for the conversion of d-amino acids to α-keto acids. When the activity of the preparation dropped below practical limits, the gel could be regenerated by water wash and recharged with fresh crude extract from yeast.     

Crystal engineering of urea alpha-network via I...O2N synthon and design of SHG active crystal N-4-iodophenyl-N'-4'-nitrophenylurea

Crystalline nitrodiphenyl ureas adopt the N-H...O tape alpha-network only when stabilization accrues from the I...O(2)N or C[triple bond]C-H...O(2)N synthon, otherwise the ureanitro motif is preferred; soft, weak interactions can direct polar self-assembly in strong N-HO hydrogen-bonded crystals.     

First Bis(σ)-borane Complexes of Group 6 Transition Metals: Experimental and Theoretical Studies

A series of bis(σ)-borane complexes of Group 6 transition metals were prepared by direct dihydroborane coordination to the metal center. Reaction of [M(CO)₃(PCy₃)₂] and two dihydroboranes [DurBH₂] and [(Me₃Si)₂NBH₂] (Dur=2,3,5,6-Me₄C₆H) yielded bis(σ)-borane complexes fac-[M(CO)₃(PCy₃){η²-(H₂BR)}] (R=Dur; 1 : M=Cr, 2 : M=W; R=N(SiMe₃)₂; 3 : M=Cr, 4 : M=W). In the case of molybdenum, we have isolated an arene complex ( 5 ) with [DurBH₂] in which the Dur group acts as a η⁶-bound ligand, and with [(Me₃Si)₂NBH₂] a similar bis(σ)-borane complex was isolated, cis,trans-[Mo(CO)₂(PCy₃)₂{η²-(H₂BN(SiMe₃)₂}] ( 6 ), with a different pattern of auxiliary ligands. The complexes were investigated by multinuclear NMR spectroscopy, mass spectrometry, X-ray diffraction analysis, and computational methods. Quantum theory of atoms in molecules (QTAIM) calculations demonstrated that the borane complexes may be described as pure bis(σ)-borane complexes rather than elongated or stretched examples given that the calculations do not show the presence of a ring-critical point (RCP) at the ring formed by the interactions of the B−H with metal center.