Electrochemical impedance spectroscopy and linear polarization applied to evaluation of porosity of phosphate conversion coatings on electrogalvanized steels

In this work, electrochemical impedance spectroscopy and linear polarization are used in determining porosity of zinc phosphates, and of nickel and manganese modified zinc phosphates on electrogalvanized steel. The porosity of the phosphate layers ranges from 0.1% for the manganese-modified hopeite to 8% for hopeite, using the linear polarization and the electrochemical impedance spectroscopy techniques. The porosity values measured using the two techniques were in agreement. All impedance spectra of coated samples showed two steps, with two capacitive arcs and an inductive looping.     

Should Epstein strip arrangement be changed?

The paper describes effect of texture on the anisotropy of magnetic properties and shows that an Epstein strip arrangement including strips cut in a direction 45° to the rolling direction gives property values that are closer to the average values than the traditional RD+TD arrangement.     

Enzymatic synthesis of medium chain monoglycerides in a solvent-free system

The synthesis of monocaprin, monolaurin, and monomyristin in a solvent-free system was conducted by mixing a commercial immobilized lipase with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. The effects of temperature, fatty acid/glycerol molar ratio, and enzyme concentration on the reaction conversion were determined. The addition of molecular sieves in the assays of monomyristin synthesis was also evaluated. The reactions were carried out for 5 to 6 h and the nonpolar phase was analyzed by gas chromatography. The best results in terms of selectivity and conversion (defined as the percentage of fatty acid consumed) were achieved when the stoichiometric amount of reagents (molar ratio=1) and 9% (w/w) commercial enzyme were used and the reaction was performed at 60°C. The addition of molecular sieves did not improve the synthesis of monomyristin. Conversions as high as 80%, with monoglycerides being the major products, were attained. After 5 h of reaction, the concentration of monoglyceride was about twice that of diglyceride, and only trace amounts of triglyceride were found. The results illustrate the technical possibility of producing medium chain monoglycerides in a solvent-free medium using a simple batch reactor.     

Lipase production by solid-state fermentation

The production of lipase by Penicillium simplicissimum in solid-state fermentation was studied using babassu cake as the basal medium. Tray-type and packed-bed bioreactors were employed. In the former, the influence of temperature; content of the medium, and medium supplementation with olive oil, sugarcane molasses, corn steep liquor, and yeast hydrolysate was studied. For all combinations of supplements, a temperature of 30°C, a moisture content of 70%, and a concentration of carbon source of 6.25% (m/m, dry basis) provided optimum conditions for lipase production. When used as single supplements olive oil and molasses also were able to provide high lipase activities (20 U/g). Using packed-bed bioreactors and molasses-supplemented medium, optimum conditions for enzyme production were air superficial velocities above 55 cm/min and temperatures below 28°C. The lower temperature optimum found for these reactors is probably related to radial heat gradient formation inside the packed bed. Maximum lipase activities obtained in these bioreactors (26.4 U/g) were 30% higher than in tray-type reactors.     

Removal of Mn(II) and Cd(II) from wastewaters by natural and modified clays

The adsorption capacities of commercial and Brazilian natural clays were evaluated to test their applications in wastewater control. We investigated the process of sorption of manganese(II) and cadmium(II) present in synthetic aqueous effluents, by calculating the adsorption isotherms at 298 K using batch experiments. The influence of temperature and pH on the adsorption process was also studied. Adsorption of metals was best described by a Langmuir isotherm, with values of Q ₀ parameter, which is related to the sorption capacity, corresponding to 6.3 mg g^{− 1} for K-10/Cd(II), 4.8 mg g^{− 1} for K-10/Mn(II), 11.2 mg g^{− 1} for NT-25/Cd(II) and 6.0 mg g^{− 1} for NT-25/Mn(II). We observed two distinct adsorption mechanisms that may influence adsorption. At the first 5 min of interaction, a cation exchange mechanism that takes place at exchange sites located on (001) basal planes is predominant. This process is inhibited by low pH values. After this first and fast step, a second sorption mechanism can be related to formation of inner-sphere surface complexes, which is formed at edges of the clay. The rate constants and the initial sorption rates correlate positively with temperature in all studied systems, denoting the predominance of a physisorption process. The addition of complexing agents that are incorporated within the K10 structure, enhance metal uptake by the adsorbent. The results have shown that both Cd(II) and Mn(II) were totally retained from a 50 mg L^{− 1} solution when K10 grafted with ammonium pyrrolidinedithiocarbamate (APDC) was used as adsorbent.     

Kinetic study of template removal of Al-MCM-41 synthesized at room temperature

The Al-MCM-41 molecular sieve with Si/Al = 20 molar ratio was synthesized at room temperature and characterized by X-ray diffractometry, surface area, thermogravimetry, and infrared spectroscopy. The kinetic study was conducted by Vyazovkin and Ozawa method, in order to verify the activation energy during the Hofmann degradation between 130 and 370 °C, in which most of surfactant removal occurs. The results suggest that the activation energy for template removal is close to 80 kJ mol^?1 lower in Al-MCM-41 synthesized at room temperature, when compared to results obtained for mesopores Al-MCM-41 and MCM-41 synthesized by hydrothermal method. This lower activation energy may be understood as consequence of textural properties, such as higher pore size.     

Complexes of Tin(IV) Tetrachloride with 3-Formylpyridine Semicarbazone and Thiosemicarbazones

The reaction of tin(IV) tetrachloride with 3-formylpyridine semicarbazone and different 3-formylpyridine thiosemicarbazones produces [Sn(HL)CL 3 ][SnCl 5 ] where HL stands for the neutral ligand. The tin(IV) complexes were characterized using a variety of spectroscopic techniques. Coordination through the pyridine nitrogen occurs in all cases. Solvation studies in DMSO indicated that dissociation of the ligands and their complete replacement by solvent molecules occurs.     

Disposable pipette tips extraction: Fundamentals,applications and state of the art

Disposable pipette tips extraction consists of a solid‐phase extraction in which the sorbent is poorly dispersed in a pipette tip, which allows a quick and dynamic contact between the aspirated analyte from the sample and the solid phase. It is a technique used particularly in food and forensic analysis, since it requires a small amount of sample and solvent. This article highlights the principles, advantages and disadvantages of the disposable pipette tips extraction method and reviews recent applications.