Non-linear approximations for natural convection in a horizontal annulus

Two different problems are proposed as approximations of the usual system modelling natural convection under the Oberbeck-Boussinesq assumptions. The error is evaluated by means of the norm of its gradient in the Hilbert space. The average Nusselt number is also estimated.     

Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates

Aromatic saturation of oil fractions is a key process in the refining industry due to increasing demand for cleanest distillates with superior performances. In this study, the behavior of different catalysts containing 1 wt.% of noble-metal inside a mesoporous MCM-41 (Si:Al=20) framework was investigated in the hydrogenation of naphthalene, as preliminary step to investigate bimetallic catalysts. While at atmospheric pressure only Rh and Pd showed a low hydrogenation activity, in the tests performed at 6.0 MPa the catalytic activity grew, exhibiting the following order: Pt>RhPd>>>Ru≈Ir. However, all the catalysts required a large H₂ excess, to avoid a decrease in hydrogenation and ring-opening activity, and gave rise to the best performance for a contact time of 6.8 s, favouring at lower values the partial hydrogenation to tetralin and at higher values cracking reactions. Finally, all the catalysts showed low thio-tolerance, with significant deactivation already feeding 100 ppm wt. of dibenzothiophene (DBT), with a partial reversibility only for the Pt-containing catalyst (CAT 3).     

Optimal virtual orbitals to relax wave functions built up with transferred extremely localized molecular orbitals

Extremely localized molecular orbitals (ELMOs), namely orbitals strictly localized on molecular fragments, are easily transferable from one molecule to another one. Hence, they provide a natural way to set up the electronic structure of large molecules using a data base of orbitals obtained from model molecules. However, this procedure obviously increases the energy with respect to a traditional MO calculation. To gain accuracy, it is important to introduce a partial electron delocalization. This can be carried out by defining proper optimal virtual orbitals that supply an efficient set for nonorthogonal configurations to be employed in VB-like expansions.     

A density functional study on a biomimetic non-heme iron catalyst: insights into alkane hydroxylation by a formally HO-FeV=O oxidant

The reactivity of [HO-(tpa)Fe(V)=O] (TPA=tris(2-pyridylmethyl)amine), derived from O-O bond heterolysis of its [H(2)O-(tpa)Fe(III)-OOH] precursor, was explored by means of hybrid density functional theory. The mechanism for alkane hydroxylation by the high-valent iron-oxo species invoked as an intermediate in Fe(tpa)/H(2)O(2) catalysis was investigated. Hydroxylation of methane and propane by HO-Fe(V)=O was studied by following the rebound mechanism associated with the heme center of cytochrome P450, and it is demonstrated that this species is capable of stereospecific alkane hydroxylation. The mechanism proposed for alkane hydroxylation by HO-Fe(V)=O accounts for the experimentally observed incorporation of solvent water into the products. An investigation of the possible hydroxylation of acetonitrile (i.e., the solvent used in the experiments) shows that the activation energy for hydrogen-atom abstraction by HO-Fe(V)=O is rather high and, in fact, rather similar to that of methane, despite the similarity of the H-CH(2)CN bond strength to that of the secondary C-H bond in propane. This result indicates that the kinetics of hydrogen-atom abstraction are strongly affected by the cyano group and rationalizes the lack of experimental evidence for solvent hydroxylation in competition with that of substrates such as cyclohexane.     

Organic templates for the generation of inorganic materials

Mankind's fascination with shapes and patterns, many examples of which come from nature, has greatly influenced areas such as art and architecture. Science too has long since been interested in the origin of shapes and structures found in nature. Whereas organic chemistry in general, and supramolecular chemistry especially, has been very successful in creating large superstructures of often stunning morphology, inorganic chemistry has lagged behind. Over the last decade, however, researchers in various fields of chemistry have been studying novel methods through which the shape of inorganic materials can be controlled at the micro- or even nanoscopic level. A method that has proven very successful is the formation of inorganic structures under the influence of (bio)organic templates, which has resulted in the generation of a large variety of structured inorganic structures that are currently unattainable through any other method.     

Charge-transfer phenomena in novel,dual-component,sugar-based organogels

The synthesis of a new saccharide-based gelator (2) containing a donor moiety has been described. Gelation experiments of a dual-component gel consisting of a saccharide-based gelator bearing an acceptor group (1) and of 2 have been performed in a variety of organic solvents and water. Moreover, gelation tests at different molar ratios of 1 and 2 have been performed in water, octanol, and diphenyl ether. In these last two solvents a gel color change was observed, from colorless to yellow, upon cooling of the sample to room temperature. This phenomenon was further investigated by UV-visible spectroscopy, which revealed the presence of charge-transfer interactions in the gel, in octanol. Temperature-dependence UV spectroscopy confirmed that such interactions occur in the gel but not in the corresponding solution sample. Furthermore, T(gel) measurements show that dual-component gels of 1 and 2 present increased thermal stability at a 50:50 ratio of the two gelators, in dependence of the solvent. Transmission electron microscopy (TEM) images of the single-component gels in diphenyl ether revealed that they consist of a fibrous network, while the dual-component gel presents a novel, helical, fibrous-bundle structure.     

Inter-annual variability in atmospheric input and partitioning of heavy metals in the Lagoon of Venice

Atmospheric bulk deposition of major and trace elements was measured at Venice from November 1995 to October 1997. Collection was carried out using polyethylene bulk passive samplers, samples being collected bi-weekly. In order to highlight the contribution of the atmosphere to water chemistry and particle budgets in the Lagoon of Venice, the geochemical composition (Si, Al, Ca, Mg, K, Na, Mn, Cr, Zn, Pb, Cd, Cu, As) of dissolved and insoluble bulk fractions was determined by AAS + ICP mass spectrometry. Great sample variability was found, with almost two orders of magnitude between maximum and minimum values for several metals. All fluxes in 1995/96 were 30% lower than in 1996/97, ranging from -3% (Ca) to -57% (Li), except for Zn, Cd and As. On the contrary, the solubility of all elements decreased during 1996/97. Partitioning between soluble and insoluble phases shows that Al, Cr, Fe and Si are mainly in the insoluble form, whereas for As, Ca, Cu, Mg, Na, Ni, K, Pb and Zn the dissolved fraction represents 50-90% of total input. The amount of particle load affects partitioning between dissolved and particulate, especially for Al and Pb. Seasonal variability was evident. The lowest pH values (approximately 5.2) were recorded in winter, causing an increase of solubility for all metals except for As, which showed the highest solubility in summer.     

Chemo‐ and Enzyme‐Catalyzed Reactions Revealing a Common Temperature‐Dependent Dynamic Solvent Effect on Enantioselectivity

The enantiomeric ratio E of enzyme‐catalyzed (Candida antarctica lipase and lipase PS) and chemo‐catalyzed (L ‐proline‐based diamines) acylation reactions of 1‐(naphthalen‐2‐yl)ethanol, 2‐phenylpropanol, and 2‐benzylpropane‐1,3‐diol is dependent on solvent and temperature. Plots of ln E vs. 1/T showed the presence of inversion temperatures (T_inv). The T_inv values for the bio‐catalyzed and the chemo‐catalyzed reactions are fairly in agreement, and correspond as well to the T_NMR values obtained by variable‐temperature ¹³C‐NMR experiments on the substrates in the same solvent of the resolution. This result demonstrates that clustering effects in the substrate solvation manage the chemical and the enzymatic enantioselectivity, and, moreover, that the solute? solvent cluster is always the real reacting species in solution for chemical as well as for enzymatic reactions.     

The Michael addition of indoles to alpha,beta-unsaturated ketones catalyzed by CeCl3.7H2O-NaI combination supported on silica gel

Alkylation of indoles by means of the Michael addition has been the subject of a number of investigation. It is well established that regioselectivity in the additions of indoles to electron-deficient alkenes is strongly controlled by the reaction medium. In a continuation of the work on developing greener and cleaner technologies, the cerium(III) chloride heptahydrate and sodium iodide combination supported on silica gel catalyzes the alkylation of various indoles with alpha,beta-unsaturated ketones giving 3-(3-oxoalkyl)indole derivatives in good yields. The substitution on the indole nucleus occurred exclusively at the 3-position, and N-alkylation products have not been observed.     

Quantum chemical studies of dioxygen activation by mononuclear non-heme iron enzymes with the 2-His-1-carboxylate facial triad

Density functional theory with the B3LYP hybrid functional has been used to study the mechanisms for dioxygen activation by four families of mononuclear non-heme iron enzymes: alpha-ketoacid-dependent dioxygenases, tetrahydrobiopterin-dependent hydroxylases, extradiol dioxygenases, and Rieske dioxygenases. These enzymes have a common active site with a ferrous ion coordinated to two histidines and one carboxylate group (aspartate or glutamate). In contrast to the heme case, this type of weak field environment always leads to a high-spin ground state. With the exception of the Rieske dioxygenases, which have an electron source outside the active site, the dioxygen activation process passes through the formation of a bridging-peroxide species, which then undergoes O-O bond cleavage finally leading to the four electron reduction of O(2). In the case of tetrahydrobiopterin- and alpha-ketoacid-dependent enzymes, the O-O heterolysis yields a high-valent iron-oxo species, which is capable of performing a two-electron oxidation chemistry on various organic substrates. For the other two families of enzymes (extradiol dioxygenases and Rieske dioxygenases) the substrate oxidation and the O-O bond cleavage are found to be coupled. In the extradiol dioxygenases the product of the O-O bond cleavage is a ferric iron with an oxy-substrate with a mixture of radical and anionic character, which is essential for the selectivity of the catechol cleavage.