Novel tacrine-based acetylcholinesterase inhibitors as potential agents for the treatment of Alzheimer’s disease: Quinolotacrine hybrids

A new series of quinolotacrine hybrids including cyclopenta- and cyclohexa-quinolotacrine derivatives were designed, synthesized, and assessed as anti-cholinesterase (ChE) agents. The designed derivatives indicated higher inhibitory effect on the acetylcholinesterase (AChE) with IC₅₀ values of 0.285–100 µM compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 µM. Of these compounds, cyclohexa-quinolotacrine hybrids displayed a little better anti-AChE activity than cyclopenta-quinolotacrine hybrids. Compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c'] diquinolin-6-one (6m) including 3-hydroxyphenyl and cyclohexane ring moieties exhibited the best AChE inhibitory activity with IC₅₀ value of 0.285 µM. The kinetic and molecular docking studies indicated that compound 6m occupied both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE as a mixed inhibitor. Using neuroprotective assay against H₂O₂-induced cell death in PC12 cells, the compound 6h illustrated significant protection among the assessed compounds. In silico ADME studies estimated good drug-likeness for the designed compounds. As a result, these quinolotacrine hybrids can be very encouraging AChE inhibitors to treat Alzheimer’s disease.

Graphic abstract

A novel series of quinolotacrine hybrids were designed, synthesized, and evaluated against AChE and BChE enzymes as potential agents for the treatment of AD. The hybrids showed good to significant inhibitory activity against AChE (0.285–100 μM) compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 μM. Among them, compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c′] diquinolin-6-one (6 m) bearing 3-hydroxyphenyl moiety and cyclohexane ring exhibited the highest anti-AChE activity with IC₅₀ value of 0.285 μM. The kinetic and molecular docking studies illustrated that compound 6 m is a mixed inhibitor and binds to both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE.

     

High-dimensional quantum dynamical study of the dissociation of H2 on Pd110

We report the first six-dimensional quantum dynamical study of the dissociative adsorption of H(2) on a (110) surface. We have performed quantum coupled-channel calculations for the system H(2)/Pd(110) based on a potential energy surface (PES) that was derived from ab initio electronic structure calculations. In particular, we have focused on the effects of the corrugation and anisotropy of the PES on the H(2) dissociation probability. Our results agree well with the available experimental data for the sticking probability as a function of the initial kinetic energy and the angle of incidence. Because of the coupling between the anisotropy and corrugation of the potential energy surface our calculations predict an unusual rotational heating and a rather small rotational alignment in desorption.     

Effect of some additives on the photoxidation of rigid PVC

The photoxidative degradation of PVC was studied by i.r. and u.v. spectroscopy and gel permeation chromatography. It was found that the photoxidative degradation of unprocessed PVC is an auto-accelerating chain scission process. Carboxylic groups were found to be the main product formed during degradation. The molecular weights $\text{M}{}_{\mathrm{n}}$ and $\text{M}{}_{\mathrm{w}}$ both decreased, but the molecular weight distribution widened with increasing length of exposure. Single additives, such as calcium stearate. Wax E and a solid organotin stabilizer, altered the rate but not the mode of the degradation. Combination of the three additives changed the mode of the photoxidation from auto-accelerating to constant rate of degradation. Processing at 170° with the combined additives increased the rate constants.     

The effect of thermal processing on PVC—III. Photo-oxidation of unstabilized PVC

The rate of photo-oxidation of unstabilized PVC is markedly dependent on the severity of the processing operation. In mildly processed PVC, peroxy gel appears to be a very effective photo-initiator whereas in more severely processed polymer, solvent soluble polymer containing polyconjugation, hydroperoxides and carbonyl groups is primarily responsible for photo-initiation. The auto-retardation of photo-oxidation which occurs in all samples is believed to be due to the build-up of a highly absorbing surface layer of degraded polymer.     

“Confinement effects for nano-electrocatalysts for oxygen reduction reaction”

Oxygen reduction reaction (ORR) is one of the most technologically relevant reactions. It occurs at the interface of the electrocatalyst and electrolyte, where oxygen reacts with protons and electrons to produce water. Because the electrocatalyst is dispersed on a high surface area support, morphological confinement becomes critical, as it dictates proton and oxygen transport. Furthermore, confinement is induced by ionomer, ionic liquids (ILs), or molecular additives, and their impact on electrocatalyst reactivity and transport properties is currently not well understood. We present an overview of electrostatics and mass transport–induced confinement and zoom in into ILs and molecular additives and try to unravel how local confinement induced by them impacts ORR.     

Functionalization of Multi Carbon Nanotubes with 1,2‐Naphthoquinone‐4‐sulfonic Acid Sodium: A Novel Sulphydryl Compounds Sensor Based on Functionalized Carbon Nanotube Film Using Michael Addition

The functionalized multi‐wall carbon nanotube with 1,2‐naphthoquinone‐4‐sulfonic acid sodium (Nq‐MWNT) was fabricated by a simple and low‐cost method. Techniques of scanning electron microscope (SEM) with energy dispersive X‐ray (EDX) analysis, fourier transform infrared spectroscopy (FT‐IR), ultraviolet visible spectroscopy (UV‐vis) and cyclic voltammetry (CV) were used to characterize the property of the Nq‐MWNT. The results showed that the MWNT with high functionalization of Nq can be obtained using this simple method. The Nq‐MWNT modified carbon paste electrode (Nq‐MWNT/CPE) was fabricated by drop‐casting technique. The resulted modified electrode was tested successfully to detection D‐penicillamine (D‐PA) and captopril (CAP) in an aqueous solution. It is found that D‐PA and CAP participate in Michael addition reaction with Nq on MWNT to form the corresponding thioquinone derivative. The reoxidation of adducts at a potential of less positive than D‐PA and CAP at the surface of the bare CPE leads to an increase in the oxidative current, which is proportional to the concentration of D‐PA and CAP. The catalytic response showed a wide linear range (3‐200 μM and 1‐130 μM for D‐PA and CAP, respectively) as well as its experimental limit of detection can be achieved 0.8 μM, and 0.4 μM for D‐PA and CAP, respectively. The modified electrode for D‐PA and CAP determination is of the property of simple preparation, good stability and high sensitivity. Furthermore, the fabricated electrode was used to determine the content of D‐PA and CAP in the tablet, suggesting the good accuracy of the method.     

Theoretical Study and NBO Analysis of the Decomposition Kinetics of Oxetane, 2-Methyloxetane and 2,2-Dimethyloxetane

A theoretical study of the thermal decomposition kinetics of oxetane (1), 2-methyloxetane (2), and 2,2-dimethyloxetane (3) has been carried out at the B3LYP/6-311+G**, B3PW91/6-311+G**, and MPW1PW91/6-311+G** levels of theory. The MPW1PW91/6-311+G** method was found to give a reasonable good agreement with the experimental kinetics and thermodynamic parameters. The decomposition reaction of compounds 1～3 yields formaldehyde and the corresponding substituted olefin. Based on the optimized ground state geometries using MPW1PW91/6-311+G** method, the natural bond orbital (NBO) analysis of donor-acceptor (bond-antibond) interactions revealed that the stabilization energies associated with the electronic delocalization from σC3-C4 bonding to σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. The σC3-C4→σO1-C2 resonance energies for compounds 1～3 are 2.63, 2.59 and 2.45 kcal mol-1, respectively. Further, the results showed that the energy gaps between σC3-C4 bonding and σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. Also, the decomposition process in these compounds are controlled by σ→σ* resonance energies. Moreover, the obtained order of energy barriers could be explained by the number of electron-releasing methyl groups substituted to the Csp3 atom (which is attached to oxygen atom). NBO analysis shows that the occupancies of σCsp3-O bonds decrease for compounds 1～3 as 3<2<1, and those of σCsp3-O bonds increase in the opposite order (3 > 2 > 1). This fact illustrates a comparatively easier thermal decomposition of the sCsp3-O bond in compound 3 compared to compound 2, and in compound 2 compared to compound 1. NBO results indicate that these reactions are occurring through a concerted and asynchronous four-membered cyclic transition state type of mechanism.     

Spin readout and initialization in a semiconductor quantum dot

Electron spin qubits in semiconductors are attractive from the viewpoint of long coherence times. However, single spin measurement is challenging. Several promising schemes incorporate ancillary tunnel couplings that may provide unwanted channels for decoherence. Here, we propose a novel spin-charge transduction scheme, converting spin information to orbital information within a single quantum dot by microwave excitation. The same quantum dot can be used for rapid initialization, gating, and readout. We present detailed modeling of such a device in silicon to confirm its feasibility.