Viscoelastic behavior of polypropylene/nitrile rubber thermoplastic elastomer blends: Application of Kerner's models for reactively compatibilized and dynamically vulcanized systems

The viscoelastic properties of binary blends of nitrile rubber (NBR) and isotactic polypropylene (PP) of different compositions have been calculated with mean‐field theories developed by Kerner. The phase morphology and geometry have been assumed, and experimental data for the component polymers over a wide temperature range have been used. Hashin's elastic–viscoelastic analogy principle is used in applying Kerner's theory of elastic systems for viscoelastic materials, namely, polymer blends. The two theoretical models used are the discrete particle model (which assumes one component as dispersed inclusions in the matrix of the other) and the polyaggregate model (in which no matrix phase but a cocontinuous structure of the two is postulated). A solution method for the coupled equations of the polyaggregate model, considering Poisson's ratio as a complex parameter, is deduced. The viscoelastic properties are determined in terms of the small‐strain dynamic storage modulus and loss tangent with a Rheovibron DDV viscoelastometer for the blends and the component polymers. Theoretical calculations are compared with the experimental small‐strain dynamic mechanical properties of the blends and their morphological characterizations. Predictions are also compared with the experimental mechanical properties of compatibilized and dynamically cured 70/30 PP/NBR blends. The results computed with the discrete particle model with PP as the matrix compare well with the experimental results for 30/70, 70/30, and 50/50 PP/NBR blends. For 70/30 and 50/50 blends, these predictions are supported by scanning electron microscopy (SEM) investigations. However, for 30/70 blends, the predictions are not in agreement with SEM results, which reveal a cocontinuous blend of the two. Predictions of the discrete particle model are poor with NBR as the matrix for all three volume fractions. A closer agreement of the predicted results for a 70/30 PP/NBR blend and the properties of a 1% maleic anhydride modified PP or 3% phenolic‐modified PP compatibilized 70/30 PP/NBR blend in the lower temperature zone has been observed. This may be explained by improved interfacial adhesion and stable phase morphology. A mixed‐cure dynamically vulcanized system gave a better agreement with the predictions with PP as the matrix than the peroxide, sulfur, and unvulcanized systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1417–1432, 2004     

Working group report: Neutrino and astroparticle physics

This is the report of neutrino and astroparticle physics working group at WHEPP-7. Discussions and work on CP violation in long baseline neutrino experiments, ultra high energy neutrinos, supernova neutrinos and water Cerenkov detectors are discussed.     

Study of interactions of various ionic species with solvents toward the design of receptors

In earlier studies, the interactions of isolated ionic species with various solvents were investigated using ab initio calculations. The ionic species investigated included cations (proton, hydronium, ammonium, and metal cations) and anions (single electron, hydroxide, and halide anions). However in the present study, we investigate the interactions of these ionic species with the solvent in the presence of other competing ionic species. We also elaborate on how the information obtained from these extensive studies have been employed in designing and synthesizing various kinds of novel ionophores and receptors.     

Dithia-crown-annelated tetrathiafulvalene disulfides: synthesis, electrochemistry, self-assembled films, and metal ion recognition

The synthesis and electrochemistry of a series of tetrathiafulvalene (TTF) and dithia-crown-TTF derivatives attached with one or two disulfide group(s) 7a-f are reported. The self-assembled monolayers (SAMs) of these TTF disulfides on gold were prepared and characterized by reflection-absorption infrared spectroscopy. The SAMs are extremely stable under a wide variety of conditions and over extended periods of time and show remarkable electrochemical stability upon repeated potential scans. SAMs of the crown-TTF disulfides 7c,d,f can recognize alkali metal ions, and the process can be monitored following the electrochemical potential shift of the surface-confined TTF group.     

Dimethyldihydropyrene-dehydrobenzoannulene hybrids: studies in aromaticity and photoisomerization

The synthesis and study of dehydrobenzoannulene (DBA)-dimethyldihydropyrene (DDP) hybrids as models for the investigation of aromaticity in weakly diatropic systems is reported. Three new monofused DBA-DDP hybrids have been synthesized, and their NMR spectra are discussed with regard to quantifying the aromaticity remaining in multibenzene-fused DBAs. Nucleus-independent chemical shifts, determined at a series of locations for each compound, bond lengths, and (1)H and (13)C NMR chemical shifts were calculated and used to probe the aromaticity of these hybrids. Systems where more than one annulene/DBA is fused to the DDP core have also been obtained, and their potential use in photoinduced isomerization applications is discussed.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

Nitrosyl rhenium complexes: Syntheses,properties, and structures of acetylacetonato derivatives

Some new complexes of rhenium containing monocoordinating acetylacetone viz. [Re(NO)(acac)₂(Cl)H₂O], Re(NO)(acac)₃(acacH)(H₂O)₂ have been synthesized by reacting acetylacetone with either Re(NO)Cl₃ · H₂O or Re(NO)(OH)₃ · H₂O. The preparation of [Re(NO)(py)(acac)₂(Cl) · H₂O], [Re(NO)(acac)(OH)(Cl) · H₂O], [Re₂(NO)₂(acacH)₃(acac)₂ · Cl₄], [Re(NO)(acac)₂(OH) · H₂O] · 2 H₂O have also been described. These complexes were characterized through their elemental analyses, u.v., vis, i.r., ¹Hn.m.r., magnetic, and conductance data.     

Pulsed remote Raman system for daytime measurements of mineral spectra

A remote Raman system has been developed utilizing a 532nm pulsed laser and gated intensified charged couple device (ICCD) detector in the oblique geometry. When the system is set for 50m sample distance it is capable of measuring Raman spectra of minerals located at distances in the range of 10-65m from the telescope. Both daytime and nighttime operations are feasible and the spectra of minerals can be measured in a short period of time, of the order of a few seconds. In oblique geometry, measured sampling depth is more than 30m, during which the system maintains very high performance without any adjustments. Much longer sampling depth (0.1-120m) has been observed when the system is configured in the coaxial geometry. Clear advantages of using a gated detection mode over the continuous (CW) mode of operation in reducing the background signal and eliminating long-lived fluorescence signals from the Raman spectra are presented. The performance of the pulsed Raman system is demonstrated by measuring spectra of Raman standards including benzene (C(6)H(6)) and naphthalene (C(10)H(8)), a low Raman cross section silicate mineral muscovite (KAl(2)(Si(3)Al)O(10)(OH)(2)), and a medium Raman cross section mineral calcite (CaCO(3)).