Three terminals optoelectronics devices integrated into a silicon on silicon waveguide

In this paper we describe two different kind of optoelectronic devices both based on a three terminals active device and exploit the plasma dispersion effect to achieve the desired working. The first device exploits this effect in order to obtain an optical modulation. The second device is an optoelectronic router based on the mode-mixing principle together with the injection-induced optical phase shift. Both devices are integrated into a Silicon on Silicon optical channel waveguide which can be realized using a standard bipolar process. The possibility of using standard, well-known technology presents several advantages with respect to III–V Optoelectronics. The active three terminal device used is a Bipolar Mode Field Effect Transistor (BMFET). Numerical simulation results are presented on both devices.     

Evidence against the hopping mechanism as an important electron transfer pathway for conformationally constrained oligopeptides

The rate constant of intramolecular electron transfer through oligopeptides based on the alpha-aminoisobutyric acid residue was determined as a function of the peptide length and found to depend weakly on the donor-acceptor separation. By measuring the electron-transfer activation energy and estimating the energy gap between donor and bridge, we were able to discard the electron hopping mechanism.     

Synthesis and spectroscopic properties of highly water-soluble perylene derivatives

Most known perylene diimides are lipophilic, with few exceptions of hydrophilic derivatives. Even in the latter case, the compounds have limited water solubility and show a strong tendency to self-aggregation. In this paper we present the synthesis of four new perylene derivatives with three and four basic side chains, obtained by functionalizing the bay-area of perylene. These molecules show great solubility in aqueous media as hydrochlorides and their tendency to self-aggregate is remarkably reduced with respect to the previously synthesized two-chained perylene diimides. Their different spectroscopic properties in various solvents and conditions are reported and discussed.     

Polar substituent effects in the bicyclo[1.1.1]pentane ring system: acidities of 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids

Experimental gas-phase acidities are reported for a series of 3-substituted (X) bicyclo [1.1.1]pent-1-yl carboxylic acids (1, Y = COOH). A comparison with available calculated data (MP2/6-311++G**// B3LYP/6-311+G**) reveals good agreement. The relative substituent effects are shown to be adequately described by a much lower level of theory (B3LYP/6-31+G*). Various correlations are presented which clearly point to polar field effects as being the origin of the relative acidities.     

Intramolecular dissociative electron transfer

Dissociative electron transfers (ET) are reactions in which the ET is associated with the cleavage of a sigma bond. Although a rather satisfactory amount of information is currently available on the intermolecular and heterogeneous dissociative ET reactions, less is known for the corresponding intramolecular processes, despite the relevance of these reactions in both chemistry and biochemistry. This tutorial review focuses on the most recent developments in this area, with particular emphasis on the reactions occurring in well-defined Donor-Spacer-Acceptor molecular systems. The goal is to provide the reader with the essential background to understand and possibly predict the feasibility and rates of these reactions, as well as to stimulate the application of the intramolecular dissociative ET concepts and related issues to still unexplored molecular systems.     

Intramolecular, intermolecular, and heterogeneous nonadiabatic dissociative electron transfer to peresters

The electron transfer to peresters was studied by electrochemical means in N,N-dimethylformamide. The reduction was carried out by three independent methods: (i) heterogeneously, by using glassy carbon electrodes, (ii) homogeneously, by using electrogenerated radical anions as the donors, and (iii) intramolecularly, by using purposely synthesized donor-spacer-acceptor (D-Sp-A) systems. Convolution analysis of the heterogeneous data led to results in excellent agreement with the dissociative electron transfer theory. The homogeneous redox catalysis data also confirmed the reduction mechanism. The cyclic voltammetries of the D-Sp-A molecules could be simulated, leading to determination of the corresponding intramolecular dissociative rate constants. Analysis of the results showed that, regardless of the way by which the acceptor is reduced, the investigated dissociative electron transfers are strongly nonadiabatic and, particularly, that the experimental rates are several orders of magnitude smaller than the adiabatic limit. A possible mechanism responsible for the observed behavior is discussed.     

Hindered inversion of chiral ion-dipole pairs.

O-Protonated S-(-)-1-phenyl-1-methoxyethane (IS) has been generated in the gas phase by CH3(2)Cl+ methylation of S-(-)-1-phenylethanol (1S). Detailed information on the reorganization dynamics of the intimate ion-dipole pair (IIS), arising from IS by C-O bond dissociation, is inferred from the kinetic study of the intramolecular inversion of configuration of IS vs its dissociation to alpha-methylbenzyl cation (III) and CH(3)OH. The behavior of IIS in the gas phase is compared to that observed in aqueous solutions, where the loss of optical activity of IS is prevented by exchange of the leaving CH3OH with the solvent shell. Hindered inversion of IS in solution is attributed to the operation of attractive interactions between the moving CH3OH moiety and the solvent cage which inhibit internal return in the intimate ion-dipole pair IIS. Similar interactions do not operate in the solvolysis of 18O-labeled 1S in aqueous acids, whose loss of optical activity efficiently competes with exchange of the leaving H2(18)O with the solvent shell.     

PHOTOBIOLOGICAL ACTIVITY OF 3,4''-DIMETHYL-8-METHOXYPSORALEN, A LINEAR FUROCOUMARIN WITH UNUSUAL DNA-BINDING PROPERTIES

The furocoumarin derivative 3,4'-dimethyl-8-methoxypsoralen (DMe-8-MOP) exhibits remarkable antiproliferative activity, but is devoid of skin phototoxicity. To gain insight into this peculiar behaviour we investigated non-covalent and covalent binding of DMe-8-MOP to calf thymus DNA, along with DNA-synthesis inhibition and mutagenic activity. The non-covalent interaction of DMe-8-MOP with the nucleic acid is quite poor as shown by equilibrium dialysis, spectroscopic, chiroptical and hydrodynamic techniques. However, it exhibits relevant photobinding ability to DNA using both isolated nucleic acid samples and cellular systems. Unlike the large majority of congeners, DMe-8-MOP undergoes predominantly photochemical monoaddition to the double helical polynucleotide. Upon examination of the products obtained by enzymatic hydrolysis of DMe-8-MOP photomodified DNA, the formation of an unusual furan side adduct is proposed, which could account for the peculiar photochemical and photobiological properties of the 3,4'-dimethyl furocoumarin derivative.     

Troposelective substitutions in microsolvated systems.

The mechanism and the stereochemistry of the intracomplex "solvolysis" of the proton-bound complexes I(X)() between CH(3)(18)OH and (R)-(+)-1-aryl-ethanol (1(R)()(X)(); aryl = phenyl (X = H); pentafluorophenyl (X = F)) have been investigated in the gas phase in the 25-100 degrees C temperature range. The results point to intracomplex "solvolysis" as proceeding through the intermediacy of the relevant benzyl cation III(X)() (a pure S(N)1 mechanism). "Solvolysis" of I(H)() leads to complete racemization at T > 50 degrees C, whereas at T < 50 degrees C the reaction displays a preferential retention of configuration. Predominant retention of configuration is also observed in the intracomplex "solvolysis" of I(F)(). This picture is rationalized in terms of different intracomplex interactions between the benzylic ion III(X)() and the nucleophile/leaving group pair, which govern the timing of their reorientation within the electrostatic complex. The obtained gas-phase picture is discussed in the light of related gas-phase and solution data. It is concluded that the solvolytic reactions are mostly governed by the lifetime and the dynamics of the species involved and, if occurring in solution, by the nature of the solvent cage. Their rigid subdivision into the S(N)1 and S(N)2 mechanistic categories appears inadequate, and the use of their stereochemistry as a mechanistic probe can be highly misleading.     

Comparison of solution-blending and melt-intercalation for the preparation of poly(ethylene-co-acrylic acid)/organoclay nanocomposites

Ethylene-acrylic acid copolymers (EAAs) and commercial montmorillonite clays organically modified with dimethyldihydrogenatedtallowammonium ions (Cloisite^® 15A and 20A) were used for the synthesis of nanocomposites by melt-compounding, static melting of polymer/clay mixtures and solution-intercalation in order to compare the effectiveness of these procedures and to shed light on the thermodynamics and the kinetics of the intercalation process. The preparation from solution was made by the use of several solvents, such as toluene, xylene, chloroform, etc., which were then removed from the hybrids by precipitation in different non-solvents or by evaporation. Particular attention was paid to the effect of the thermal treatments which are often used when processing the composites prepared from solution. X-ray diffraction (XRD) of the solution-blended composites showed that no intercalation of the EAAs inside the clay galleries can be achieved if solvent removal is made by precipitation in non-solvents or by room-temperature evaporation. On the contrary, intercalation was found to occur very rapidly (in less than 1 min) when both the hybrids prepared from solution and the mechanical blends of powdered components were melted in the absence of shear. Polymer intercalation was also found to occur, though with a lower rate, upon annealing the powder mixtures at temperatures lower than the EAA melting point. Microscopic observations made by polarized optical microscopy, scanning electron microscopy and transmission electron microscopy showed that the clay particles dispersion is appreciably lower for the composites prepared from solution, compared to those produced in the melt under shear flow conditions. The hybrids obtained by static melting of powder mixtures, on the other side, were expectedly found to comprise micron sized clay agglomerates, although intercalation was demonstrated also for these materials by XRD. The structure of the intercalated silicate layers stacks, characterized by an interlayer spacing of 4.0 nm, was shown to be independent of the preparation procedure and to correspond to thermodynamic equilibrium.