Effects of annealing on crystallinity and phase behaviour of PET/PC block copolymers

The effects of the annealing on the properties of PET/PC block copolymers, obtained by reactive blending in the presence of different catalysts and for different mixing times, have been studied. The annealing, performed in conditions that promote the crystallization, has been used to better understand the role of block length in determining the phase behaviour. The copolymers characterized by blocks with molecular weight larger than 8000 are able to reorganize towards more ordered domains. This rearrangement maintains the phase separation, as two crystalline phases are present before and after annealing, due to the immiscibility of long blocks. In copolymers characterized by blocks with molecular weight equal to about 2500, that is the higher limit for the miscibility in the amorphous state in PET/PC block copolymers studied in this work, the rearrangement of the chains during annealing causes a phase separation leading to two crystalline phases. Only in the copolymers with molecular weight of blocks lower than 1500, the very short block length hinders the crystallization: therefore, only in this case a phase separation does not take place after annealing.     

Dynamic-mechanical properties and melting points of some aliphatic and partially aromatic polyamides

Some aliphatic and partially aromatic polyamides have been prepared from hexamethylene diamine and the following dicarboxylic acids: deca-, octa-, hexa-methylenedicarboxylic, p-carboxymethylphenoxyacetic, p-carboxyethylphenoxyacetic, p-phenylenedipropionic, p-phenylenediacetic, p-carboxymethoxyphenoxyacetic, β(p-carboxymethyl)phenylpropionic.The dynamic-mechanical properties at 110 Hz have been measured between ?140° and about 200. Three relaxation processes α β and γ have been found: only the main transition α appreciably depends on chemical structure.The influences of the length of repeating unit and of in-chain substitution on melting points, crystallinity and the dynamic-mechanical α transition have been investigated. The results have been discussed in terms of chain flexibility, chain packing and intermolecular forces.     

Application of complex reaction kinetic models in thermal analysis

The complexity of the phenomena which arise during the heating of the various substances seldom can be described by a single reaction kinetic equation. As a consequence, sophisticated models with several unknown parameters have to be developed. The determination of the unknown parameters and the validation of the models requires the simultaneous evaluation of whole series of experiments. We can accept a model and its parameters if, and only if we get a reasonable fit to several experiments carried out at different experimental conditions. In the field of the thermal analysis the method of least squares alone seldom can select abest model or abest set of parameter values. Nevertheless, the careful evaluation of the experiments may help in the discerning between various chemical or physical assumptions by the quality of the corresponding fit between the experimental and the simulated date. The problem is illustrated by the thermal de-composition of cellulose under various experimental conditions.This research program was funded by the National Science Foundation (grant INT 8914934), the US Hungarian Science and Technology Joint Fund (grants 90b-22 and 93b-375), the Hungarian National Research Fund (OTKA, grant 3077/91) and the Coral Industries Endowment.     

Characterization of plant oils on a monolithic silica column by high-performance liquid chromatography-atmospheric pressure chemical lonization-mass spectrometry

Summary Five plant oils (peanut, pumpkin seed, sesame seed, soybean, and wheat germ) have been analyzed by high-performance liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (HPLC-APCI-MS). Gradient elution was performed with acetone-acetonitrile mobile phases on a short monolithic silica column (SilicaROD, RP-18e, 50 mm×4.6 mm). Identification of plant oil triacylglycerols (TAG) was based on the pseudomolecular ion [M+H]⁺ and the diacylglycerol [M−RCO₂]⁺ fragments. Positional isomers of triacylglycerols were identified from the relative intensities of the [M-RCO₂]⁺ fragments. Principal-component analysis, used to find similarities and differences between the different oils, indicated that the different plant oils could be clearly differentiated according to their triacylglycerol composition. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Chemoenzymatic synthesis of both enantiomers of 3-hydroxy- and 3-amino-3-phenylpropanoic acid

Ethyl (S)-3-hydroxy-3-phenylpropionate (S)-2 was obtained by the asymmetric reduction of ethyl 3-phenyl-3-oxopropionate 1 with the yeast Saccharomyces cerevisiae (ATCC 9080). The kinetic resolution of racemic ethyl 2-acetoxy-3-phenyl-propionate rac-3 with the same microorganism, gave after hydrolysis ethyl (R)- and (S)-3-hydroxy-3-phenylpropionates (R)-2 and (S)-2 which were converted by a straightforward series of reactions to the enantiomers of 3-amino-3-phenyl-propionic acids (S)-6 and (R)-6. The asymmetric reduction and hydrolytic kinetic resolution were also tested with several other whole cell systems under a variety of conditions.     

A support for the identification of non-tryptic peptides based on low resolution tandem and sequential mass spectrometry data: The INSPIRE software

A simple software, to be used as an aid in the identification of non-tryptic peptides based on low resolution (3D-ion trap) tandem (MS/MS) and sequential (MS³) mass spectrometry data, is presented.     

Optofluidic droplet router

This contribution presents an optofluidic droplet router which is able to route and steer microdroplets using optically induced forces created solely by the bulk photovoltaic effect on a nonlinear substrate. The combination of microfluidic tools with the properties of a photorefractive crystal allows for the generation of dielectrophoretic forces that can be either repulsive, leading to virtual barriers, or attractive, creating virtual rails. The sign of these forces is solely determined by the electrical properties of the liquid medium under investigation. Moreover, the induced structures on the bottom of the microfluidic channel are optically reconfigurable, so that the same device can easily be adopted for different purposes. Appropriate droplet‐generating devices are fabricated by UV illumination of SU‐8 and polydimethylsiloxane replica molding of the master structures. The bottom of the channels is formed by an iron‐doped lithium niobate crystal, whose internal electric fields are induced by structured illumination patterns and exert dielectrophoretic forces on droplets in the microfluidic section.

     

Stereoselective synthesis of spirocyclic ketones by Nazarov reaction

[reaction: see text] The Suzuki-Miyaura cross-coupling reaction between alpha-ethoxydienyl boronates and lactone-derived vinyl triflates affords functionalized 6-(1-ethoxy-1,3-butadienyl)dihydropyran derivatives that undergo a Nazarov electrocyclic reaction under mild acidic conditions to give functionalized spirocyclic ketones. The product distribution and the stereoselectivity of the process are strongly dependent on the substitution of both the alpha-ethoxydiene and dihydropyran moieties. High stereoselectivity is observed in the presence of a C2-substituent on the dihydropyran moiety. The results are explained in terms of transition state geometries.