Effects of annealing on crystallinity and phase behaviour of PET/PC block copolymers

The effects of the annealing on the properties of PET/PC block copolymers, obtained by reactive blending in the presence of different catalysts and for different mixing times, have been studied. The annealing, performed in conditions that promote the crystallization, has been used to better understand the role of block length in determining the phase behaviour. The copolymers characterized by blocks with molecular weight larger than 8000 are able to reorganize towards more ordered domains. This rearrangement maintains the phase separation, as two crystalline phases are present before and after annealing, due to the immiscibility of long blocks. In copolymers characterized by blocks with molecular weight equal to about 2500, that is the higher limit for the miscibility in the amorphous state in PET/PC block copolymers studied in this work, the rearrangement of the chains during annealing causes a phase separation leading to two crystalline phases. Only in the copolymers with molecular weight of blocks lower than 1500, the very short block length hinders the crystallization: therefore, only in this case a phase separation does not take place after annealing.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Synthesis,coordination to Rh(I), and hydroformylation catalysis of new beta-aminophosphines bearing a dangling nitrogen group: an unusual inversion of a Rh-coordinated P center

Variants of the beta-aminophosphine L(1) [Ph(2)PCH(2)CH(Ph)NHPh] containing additional nitrogen donor functions have been prepared. These functions are branched off the C atom adjacent to the P atom, or the P atom itself. Ligand [Ph(2)PCH(o-C(6)H(4)NMe(2))CH(Ph)NHPh] has been obtained as a mixture of two diastereomers L(3A) and L(3B) by lithiation of L(2) [Ph(2)PCH(2)(o-C(6)H(4)NMe(2))] with n-BuLi followed by PhCH=NPh addition and hydrolysis. The diastereomers have been separated by fractional crystallization from ethanol. Ligand Et(2)NCH(2)P(Ph)CH(2)CH(Ph)NHPh has been obtained as a mixture of two diastereomers L(5A) and L(5B)(starting with P-Ph reductive cleavage of L(1) by lithium and subsequent hydrolysis to give PhP(H)CH(2)CH(Ph)NHPh (mixture of two diastereomers L(4A) and L(4B)). The latter reacts with diethylamine and formaldehyde to afford the L(5) diastereomeric mixture. Complexes RhCl(CO)(L) (L = L(3A), 1(A); L(3B), 1(B); L(5A/B), 2(A/B)) were obtained by reaction of [RhCl(CO)(2)](2) and the appropriate ligand or ligand mixture. Complexes 1(A), 1(B), and 2(A) have been isolated in pure form and characterized by classical techniques and by single-crystal X-ray diffraction. All structures exhibit a bidentate kappa-P,kappa-N(NHPh) mode similar to the complex containing L(1). While complexes 1(A) or 1(B) are stable in CDCl(3) solution, complex 2(A) slowly converts to its diastereomer 2(B). This unexpected epimerization appears to take place by inversion at the Rh-coordinated P center, an apparently unprecedented phenomenon. A mechanism based on a reversible P-C bond oxidative addition is proposed. The influence of the pendant nitrogen function of the diaminophosphines L(3A) and L(5A/B) on the rhodium catalytic activity in styrene hydroformylation has been examined and compared to that of the aminophosphines L(1) or L(2). The observed trends are related to the basicity of the dangling amine function and to its proximity to the metal center.     

Coordination de la phosphine organo-fer [CpFeIIC6Me5CH2PPh2]+ au RhI et proprietes spectroscopiques,electrochimiques et catalytiques des complexes heterobinucleaires FeII-RhI

The reactions between the phosphine-organoiron [CpFe^II-η⁶-C₆Me₅CH₂PPh₂]⁺ PF₆^? (1) and [RhCl(η⁴-diolefin)(μ-Cl)]₂ in CH₂Cl₂ at reflux give the new heterobinuclear air-stable crystalline complexes [CpFe^II-η⁶-C₆Me₅CH₂)P(Ph)₂Rh(η⁴-diene)Cl]PF₆,(D'*-diene=cyclooctadiene (COD): 65%, 2; trimethylfluorobenzobicyclo[2.2.2]octadiene (Me₃TFB): 48%, 3). Complexes 2 and 3 have been studied by ¹H, ¹³C and ³¹P NMR spectroscopy and they are carbonylated (CO, 1 atm). Cyclic voltammetry experiments with addition of MeOH show electron transfer Fe^IRh^I → Fe^IIRh⁰, the presence of a catalytic wave Fe^I/Fe^II and the possible formation of Rh hydrides. Under normal conditions 2 is a catalyst for hydrogenation of cyclohexene, but it is less efficient than the known mononuclear Rh¹ analogues.     

Dynamic-mechanical properties and melting points of some aliphatic and partially aromatic polyamides

Some aliphatic and partially aromatic polyamides have been prepared from hexamethylene diamine and the following dicarboxylic acids: deca-, octa-, hexa-methylenedicarboxylic, p-carboxymethylphenoxyacetic, p-carboxyethylphenoxyacetic, p-phenylenedipropionic, p-phenylenediacetic, p-carboxymethoxyphenoxyacetic, β(p-carboxymethyl)phenylpropionic.The dynamic-mechanical properties at 110 Hz have been measured between ?140° and about 200. Three relaxation processes α β and γ have been found: only the main transition α appreciably depends on chemical structure.The influences of the length of repeating unit and of in-chain substitution on melting points, crystallinity and the dynamic-mechanical α transition have been investigated. The results have been discussed in terms of chain flexibility, chain packing and intermolecular forces.     

Rhodium and platinum complexes as catalysts for the polymerization of phenylacetylene

In polymerization reactions of phenylacetylene three different types of polyphenylacetylene (PPA) were prepared by using Rh and Pt complexes as catalysts in different reaction conditions. Type I PPA is obtained with [Rh (COD) Chel] PF₆ complexes (COD = cis,cis-cycloocta 1,5-diene; chel = 2,2′-bipyridine, 1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline) in bulk, benzene methanol, while type II PPA is obtained with the same catalysts in p-dioxane and type III PPA in the presence of [Pt (? C?CPh)₂(PPh₃)₂] in bulk. Type I, II, and III PPA exhibit different IR and ¹H-NMR spectra, which have been compared with literature data. Correlations proposed by different Authors between spectral properties of PPA and chain structures are also discussed.     

The influence of the ligands on the catalytic activity of a series of RhI complexes in reactions with phenylacetylene: Synthesis of stereoregular poly(phenyl) acetylene

The catalytic activity of a series of [Rh L-L chel]X complexes, in which we have varied the unsaturated ligand [L-L = cis, cis-cycloocta 1,5-diene(cod) or 2,5-norbornadiene(nbd) the nitrogen chelating ligand [chel = 2,2′-bipyridine(bipy), 2,2′-dipyridylamine(dipyam), 2,2′-bipyrazine (bipz), 4,4′-dimethyl-2,2′-bipyridine (4,4′-Me₂bipy)] and the counter ion [X = PF₆, ClO₄, BPh₄], has been examined in reactions with phyenylacetylene (PA). The catalytic behaviour of the [Rh(cod)Cl₂],tmeda (tmeda = N,N,N′,N′tetramethylethylendiamine), [Rh(cod)Cl₂],teda] (teda = triethylendiamine), of the dimer [Rh(cod)Cl]₂, and the use of NaOH as cocatalyst in different reaction conditions was also examined. The influence of the ligands on the catalytic activity of these Rh^I complexes is discussed. ¹H and ¹³C NMR spectra have shown that highly stereoregular polyphenylacetilene can be obtained. Conditions for homogeneous doping of PPA, to obtain materials whose conductivity varies over 10–11 magnitude orders, are proposed. The stability of the doped polymers is also discussed.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.