Blue Light-Induced Coupling of N-Hydroxy Sulfonamides: An Efficient and Green Approach to Symmetrical Thiosulfonates

Russian Journal of Organic Chemistry - A highly efficient green protocol has been proposed for the synthesis of symmetrical S-aryl arenesulfonothioates by irradiation of N-hydroxy arenesulfonamides...     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Theory of high temperature superconductivity in YBa2Cu3O7_δ

A theory of high temperature superconductivity in YBa₂Cu₃O₇__δ compound has been developed on the basis of the momentum pairing of electrons through the relativistic Darwin interaction. The transport behaviour of electrons is explained in terms of a mechanism of correlated electron transfer arising from the electron-phonon coupling. A model Hamiltonian has been developed to describe the superconducting properties of the system. This gives an energy gap which is higher than the BCS value. Attempts have been made to explain the absence of isotope effect, the linear dependence of specific heat, the presence of larger temperature-independent paramagnetism in the normal phase and the softening of some of the optic phonon modes observed in this system.     

(e, 3e) test on e-e correlations in helium

The angular variations of the five-fold differential cross section obtained by using different wave functions of helium are compared with experimental data. It is found that in the coplanar geometry two kinematical arrangements, (i) equal energy sharing between the two ejected electrons with one of them ejected along the momentum transfer direction and the other along varying direction and (ii) the Bethe ridge condition with fixed sum of ejected electron energies and varying angle between them, are very sensitive to e-e correlations contained in the target wave function. This comparison has been used to show that open-shell class of wave functions better incorporate e-e correlations than the closed-shell class.     

Solid-phase approach towards the synthesis of functionalized imidazo[1,2-b]pyrazol-2-ones

The solid-phase synthesis of a series of imidazo[1,2-b]pyrazol-2-ones, an interesting 5,5-fused ring system, based on diverse set of hydrazine acids and malanonitriles is described. The method involves formation of 5-aminopyrazoles on solid support and subsequent cyclizative cleavage off the resin. Compounds were obtained in acceptable to excellent yields and are suitable for biological evaluation without further purification.     

Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes

The preparation of discrete polyol based silane precursors derived from glycerol by a simple one-pot process is described. These polyol-based silanes could be hydrolyzed under mild pH conditions and upon gelation resulted in the formation of optically clear, monolithic, mesoporous silica. The hydrolysis and condensation reactions lead to cure rates that are very sensitive to ionic strength, but are almost unaffected by pH in contrast to those of alkoxysilanes derived from primary alcohols such as Si(OEt)₄. Residual glycerol in the silica monolith could be removed by washing, or could be left in the silica to reduce the magnitude of shrinkage during long term storage. The biocompatible glyceroxysilane precursors lead to materials that were able to retain the activity of entrapped enzymes over repeated cycles of use for periods of up to several months.     

Complexation of Macrocyclic Compounds with Silver Ions in Surfactant Media

This paper is a report on the complexation studies of silverions with certain water soluble crown ethers viz., 15-crown-5,18-crown-6, cyclam, diaza 15-crown-5 and certain water insolublecrown ethers viz., benzo 15-crown-5, dibenzodiaza 15-crown-4,dibenzyldiaza 18-crown-6 in some nonionic surfactants viz.,polyoxyethylated alkyl phenol (TX 100), polyoxyethylene (20)sorbiton monolaurate (Tween 20), polyoxyethylene (20) sorbitonmonoleate (Tween 80) and polyoxyethylated glyco monolaurylether (Brij 35) by potentiometry. In addition, conductometry wasalso used to study the complexation of oxa crown ethers to comparethe results obtained by potentiometry, which were found to be ingood agreement with each other. The complexation studies indicate1:1 complex formation between the silver ion and macrocycle, thelog_ML ⁿ⁺ values being in the range 1 to 9.     

Brominated poly(isobutylene‐co‐para‐methylstyrene) (BIMS)‐clay nanocomposites: Synthesis and characterization

In this work, preparation and properties of different nanoclays modified by organic amines (octadecyl amine, a primary amine, and hexadecyltrimethylammonium bromide, a tertiary amine) and brominated polyisobutylene‐co‐paramethylstyrene (BIMS)‐clay nanocomposites are reported. The clays and the rubber nanocomposites have been characterized with the help of Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The X‐ray diffraction peaks observed in the range of 3 °–10 ° for the modified clays disappear in the rubber nanocomposites. TEM photographs show predominantly exfoliation of the clays in the range of 12 ± 4 nm in the BIMS. In the FTIR spectra of the nanocomposites, there are common peaks of virgin rubber as well as those of the clays. Excellent improvement in mechanical properties like tensile strength, elongation at break, and modulus is observed on incorporation of the nanoclays in the BIMS. Structure‐property correlation in the above nanocomposites is attempted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4489–4502, 2004     

Barycentric coordinates for convex sets

In this paper we provide an extension of barycentric coordinates from simplices to arbitrary convex sets. Barycentric coordinates over convex 2D polygons have found numerous applications in various fields as they allow smooth interpolation of data located on vertices. However, no explicit formulation valid for arbitrary convex polytopes has been proposed to extend this interpolation in higher dimensions. Moreover, there has been no attempt to extend these functions into the continuous domain, where barycentric coordinates are related to Green’s functions and construct functions that satisfy a boundary value problem. First, we review the properties and construction of barycentric coordinates in the discrete domain for convex polytopes. Next, we show how these concepts extend into the continuous domain to yield barycentric coordinates for continuous functions. We then provide a proof that our functions satisfy all the desirable properties of barycentric coordinates in arbitrary dimensions. Finally, we provide an example of constructing such barycentric functions over regions bounded by parametric curves and show how they can be used to perform freeform deformations.