Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Molecular information on the dissolution of polydisperse polymers: Mixtures of long and short poly(ethylene oxide)

A systematic study of the dissolution of dry, polydisperse poly(ethylene oxide) (PEO) samples, obtained from mixtures of low-molecular-weight and high-molecular-weight PEO, was made. During the dissolution process, the individual release of the low- and high-molecular-weight fractions was monitored. The high-molecular-weight/low-molecular-weight ratio controls the release rate, and the fraction of high-molecular-weight polymers dominates the effect on the overall release rate in mixed PEO tablets. Both fractions are released at the same rate during the main part of the dissolution process; however, during the initial dissolution period a fractionation occurs. The release rate is not a unique function of the average molecular weight of the polymer, but also depends on the polydispersity. By contrast, the average dimension of a polymer coil, as given by the intrinsic viscosity, gives a good prediction of the release rate irrespective of the polydispersity or details of the molecular weight distribution.     

Molar mass characterization of cationic methyl methacrylate-ethyl acrylate copolymers using size-exclusion chromatography with online multi-angle light scattering and refractometric detection

Size-exclusion chromatography (SEC) combined with online multi-angle light scattering (MALS) and refractometric (RI) detection has been employed for the molar mass characterisation of water-insoluble cationic methyl methacrylate-ethyl acrylate copolymers (Eudragit RS and RL). Due to their positive charge, cationic polymers are particularly difficult to separate on a SEC column, in worst cases being completely adsorbed on the oppositely charged packing material. This work has examined how a careful addition of salt (LiCl) to the copolymer solution in ethanol decreases the electrostatic interactions, clearly seen as a decrease in elution volume from the SEC column as well as an improved recovery. At a certain level of ionic strength, typically about 50 mM, the copolymer recovery from the SEC column reached 100% and molar mass distributions corresponding to the complete sample could be obtained. The combined MALS/RI detection gives the opportunity to measure the absolute molar mass independent of recovery and retention. Thus, in this study, it turned out to be a favourable tool for tracing the changes in elution behaviour of the charged copolymer as the ionic strength was increased.     

Structure and dynamic stability of cyclodextrin inclusion complexes with 1,4-disubstituted bicyclo[2.2.2]octanes

The properties of inclusion complexes of 1,4-di-R-bicyclo[2.2.2]octaves (R = H (1), Me (2), Cl (3), Br (4), and OH (5)) with cyclodextrins have been studied by NMR, microcalorimetry, and force-field computations. The compounds2 and3 (but not the other compounds) give dynamically stable 1:2 guest-host complexes with -cyclodextrin. Microcalorimetry of5 in water indicates a moderately strong 1:1 complex with - but weak complexes with - or -cyclodextrin. The behaviour depends on the subtle interplay size, polarity, hydrophobicity and type of solvent.     

Changes in soil C-isotopic composition in an agroecosystem under Free Air Carbon dioxide Enrichment (FACE) treatment during a crop rotation period

FACE (Free Air Carbon dioxide Enrichment) has been used since 1999 to evaluate the effects of future atmospheric CO(2) concentrations on an arable crop agroecosystem. The experiment conducted at the Institute of Agroecology at the Federal Research Centre in Braunschweig consists of a typical local crop rotation of winter barley, a cover crop, sugar beet and winter wheat. The atmospheric CO2 concentration of ambient air is about 375 ppm with a delta13C value of -7 to -9 per thousand, and 550 ppm (delta13C value = -20.2 per thousand) during daylight hours in the rings fumigated with additional CO2. Thus, the surplus C can be traced in the agricultural system. Over the course of the first experimental period (3-year crop rotation period), the C-isotopic composition and the C concentration in soil were monitored monthly. Plant samples were analysed according to the relevant developmental stages of the crop under cultivation. A 13C depletion was observed in plant parts, as well as in soil samples from the FACE rings under CO2 enrichment, indicating that labelled C has reached both respective ecosystem compartments. Albeit farming management practice (especially ploughing) leads to a mixing of 'old' and 'new' C compounds throughout all soil horizons down to the end of the ploughing layer and resulted in a heterogeneous distribution of newly formed C compounds in the soil, isotope analysis of soil C reflected where the surplus C went.     

The effect of Fenton chemistry on the properties of microfibrillated cellulose

A fully bleached birch kraft pulp was treated with acidic hydrogen peroxide in the presence of ferrous ions (Fenton’s reagent) and thereafter treated mechanically in a colloid mill to produce a product containing microfibrillated cellulose (MFC). The produced MFC products were chemically and morphologically characterized and compared with MFC products produced without pretreatment as well as with enzymatic hydrolysis. Fenton treatment resulted in an increase in total charge and number of carbonyl groups while the intrinsic viscosity decreased. The Fenton treated pulps were easier to process mechanically i.e. they reached a higher specific surface area at a given mechanical treatment time and the MFC produced had a stable water-fibre suspension for at least 8 weeks compared to enzymatic pretreated pulps and pulps not subjected to any pretreatment.     

The Dynamics of the Neuropeptide Y Receptor Type 1 Investigated by Solid-State NMR and Molecular Dynamics Simulation

We report data on the structural dynamics of the neuropeptide Y (NPY) G-protein-coupled receptor (GPCR) type 1 (Y1R), a typical representative of class A peptide ligand GPCRs, using a combination of solid-state NMR and molecular dynamics (MD) simulation. First, the equilibrium dynamics of Y1R were studied using ¹⁵N-NMR and quantitative determination of ¹H-¹³C order parameters through the measurement of dipolar couplings in separated-local-field NMR experiments. Order parameters reporting the amplitudes of the molecular motions of the C-H bond vectors of Y1R in DMPC membranes are 0.57 for the Cα sites and lower in the side chains (0.37 for the CH₂ and 0.18 for the CH₃ groups). Different NMR excitation schemes identify relatively rigid and also dynamic segments of the molecule. In monounsaturated membranes composed of longer lipid chains, Y1R is more rigid, attributed to a higher hydrophobic thickness of the lipid membrane. The presence of an antagonist or NPY has little influence on the amplitude of motions, whereas the addition of agonist and arrestin led to a pronounced rigidization. To investigate Y1R dynamics with site resolution, we conducted extensive all-atom MD simulations of the apo and antagonist-bound state. In each state, three replicas with a length of 20 μs (with one exception, where the trajectory length was 10 μs) were conducted. In these simulations, order parameters of each residue were determined and showed high values in the transmembrane helices, whereas the loops and termini exhibit much lower order. The extracellular helix segments undergo larger amplitude motions than their intracellular counterparts, whereas the opposite is observed for the loops, Helix 8, and termini. Only minor differences in order were observed between the apo and antagonist-bound state, whereas the time scale of the motions is shorter for the apo state. Although these relatively fast motions occurring with correlation times of ns up to a few µs have no direct relevance for receptor activation, it is believed that they represent the prerequisite for larger conformational transitions in proteins.     

(E,E,E)‐1,3,5‐Tris[4‐(acetyl­sulfan­yl)­styr­yl]­benzene toluene hemisolvate

The first crystal structure of a three‐terminal sulfur end‐capped oligo­phenyl­ene­vinyl­ene, C₃₆H₃₀O₃S₃·0.5C₇H₈, has been determined at 122 (1) K. The mol­ecular threefold symmetry is not utilized in the crystal structure. It is confirmed that the double bonds have been fully transformed into a trans configuration by iodine treatment.