Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004     

Rheological and physical properties of aliphatic hyperbranched polyesters

The effects of the size (pseudo‐generation number) and nature of end groups on physical and rheological properties were investigated for a series of hyperbranched polyesters based on an ethoxylated pentaerythritol core and 2,2‐bis‐(hydroxymethyl)propionic acid repeat units. The observed linear dependence of the melt viscosity on the molar mass in the high pseudo‐generation‐number limit indicated that entanglement effects were substantially absent. Moreover, the marked influence of end capping of the end groups on the physical and rheological properties suggested that intermolecular interactions were dominated by contacts between the outer shells of the molecules, in which the end groups were assumed to be concentrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1218–1225, 2004     

On the optimum set of polarization measurements for the scattering of two indentical fermions to determine the helicity amplitudes

The polarization asymmetries related to usual polarizations combine at least 4 different helicity amplitudes. The introduction of ±45° inclined transverse polarizations allows us to obtain the complete set of new polarization asymmetries combining only up to 3 helicity amplitudes. There are no further polarization asymmetries depending on a smaller number of helicity amplitudes. These expressions are most economical to determine the helicity amplitudes from observed data. Some of them are suitable to study especially the spin-flip effects. We give a complete Table of all such polarization asymmetries.     

Vanishing of local homology

 We study the vanishing properties of local homology of complexes of modules without assuming that its homology is artinian. Using vanishing results for local homology and cohomology we prove new vanishing results for Ext- and Tor-modules. Received: 1 August 2002; in final form: 23 September 2002 / Published online: 16 May 2003 Mathematics Subject Classification (1991): 13C12, 13D07, 13D45.     

Multicriteria Semi-Obnoxious Network Location Problems (MSNLP) with Sum and Center Objectives

Locating a facility is often modeled as either the maxisum or the minisum problem, reflecting whether the facility is undesirable (obnoxious) or desirable. But many facilities are both desirable and undesirable at the same time, e.g., an airport. This can be modeled as a multicriteria network location problem, where some of the sum-objectives are maximized (push effect) and some of the sum-objectives are minimized (pull effect).We present a polynomial time algorithm for this model along with some basic theoretical results, and generalize the results also to incorporate maximin and minimax objectives. In fact, the method works for any piecewise linear objective functions. Finally, we present some computational results.     

Dependence of impurity incorporation upon substrate misorientation during GaAs growth by metalorganic vapour phase epitaxy

Doping studies of the incorporation behaviour of three different dopants (Zn, In and Si) versus the misorientation of the (100) surface during MOVPE growth of GaAs have been carried out with diethylzinc, trimethylindium and disilane as precursors. The incorporation of the dopants has been studied as function of the input mole fraction dopant, growth temperature, degree and direction of misorientation. In order to explain the results we discuss the BCF theory and the nature of the steps as function of above mentioned parameters. It appears that the BCF theory alone cannot explain the results, a counteracting mechanism has been introduced based on preferential arsenic desorption from the step edges.     

The zeta function of a simplicial complex

Given a simplicial complex δ on vertices {1, …,n} and a fieldF we consider the subvariety of projective (n−1)-space overF consisting of points whose homogeneous coordinates have support in δ. We give a simple rational expression for the zeta function of this singular projective variety overF _q and show a close connection with the Betti numbers of the corresponding variety over ℂ. This connection is particularly simple in the case when Δ is Cohen-Macaulay.