Germacrene A is a product of the aristolochene synthase-mediated conversion of farnesylpyrophosphate to aristolochene

The biosynthesis of several sesquiterpenes has been proposed to proceed via germacrene A. However, to date, the production of germacrene A has not been proven directly for any of the sesquiterpene synthases for which it was postulated as an intermediate. We demonstrate here for the first time that significant amounts of germacrene A (7.5% of the total amount of products) are indeed released from wild-type aristolochene synthase (AS) from Penicillium roqueforti. Germacrene A was identified through direct GC-MS comparison to an authentic sample and through production of beta-elemene in a thermal Cope rearrangement. AS also produced a small amount of valencene through deprotonation of C6 rather than C8 in the final step of the reaction. On the basis of the X-ray structure of AS, Tyr 92 was postulated to be the active-site acid responsible for protonation of germacrene A (Caruthers, J. M.; Kang, I.; Rynkiewicz, M. J.; Cane, D. E.; Christianson, D. W. J. Biol. Chem. 2000, 275, 25533-25539). The CD spectra of a mutant protein, ASY92F, in which Tyr 92 was replaced by Phe, and of AS were very similar. ASY92F was approximately 0.1% as active as nonmutated recombinant AS. The steady-state kinetic parameters were measured as 0.138 min(-1) and 0.189 mM for k(cat) and K(M), respectively. Similar to a mutant protein of 5-epi-aristolochene (Rising, K. A.; Starks, C. M.; Noel, J. P.; Chappell, J. J. Am. Chem. Soc. 2000, 122, 1861-1866), the mutant released significant amounts of germacrene A (approximately 29%). ASY92F also produced various amounts of a further five hydrocarbons of molecular weight 204, valencene, beta-(E)-farnesene, alpha- and beta-selinene, and selina-4,11-diene.     

Photocontrol of DNA binding specificity of a miniature engrailed homeodomain

Control of DNA binding of HDH-3, a 18-residue polypeptide based on the recognition helix of the Q50K engrailed homeodomain, has been achieved. HDH-3 was linked to an azobenzene cross-linker through two cysteine residues in an i, i + 11 spacing. For the thermodynamically stable trans configuration of the cross-linker, the dark-adapted peptide (dad-HDH-3) adopted a mainly alpha-helical structure as judged by circular dichroism (CD) spectroscopy. After irradiation with light of 360 nm, the helical content of the peptide (irrad-HDH-3) was reduced significantly and the CD spectrum of the irradiated peptide resembled that of the largely unstructured, unalkylated peptide. Despite lacking helices-1 and -2 and the N-terminal arm of Q50K engrailed, dad-HDH-3 bound to its natural DNA target sequence TAATCC (QRE) with high affinity (K(D) = 7.5 +/- 1.3 nM). The binding affinity for the mutant DNA sequence, TAATTA (ERE), was reduced significantly (K(D) = 140 +/- 11 nM). Unlike irrad-HDH-3, which like the unalkylated parent peptide displayed only marginal DNA binding specificity, dad-HDH-3 specified base pairs 5 and 6 of QRE with an accuracy rivaling that of the intact wild-type Q50K engrailed homeodomain, making dad-HDH-3 the most specific designed DNA binding miniature homeodomain reported to date. Moreover, DNA binding affinity and specificity of HDH-3 could be controlled externally by irradiation with light.     

Controlling the DNA binding specificity of bHLH proteins through intramolecular interactions

Reversible control of the conformation of proteins was employed to probe the relationship between flexibility and specificity of the basic helix-loop-helix protein MyoD. A fusion protein (apaMyoD) was designed where the basic DNA binding helix of MyoD was stablized by an amino-terminal extension with a sequence derived from the bee venom peptide apamin. The disulfide-stabilized helix from apamin served as a nucleus for a helix that extended for a further ten residues, thereby holding apaMyoD's DNA recognition helix in a predominantly alpha-helical conformation. The thermal stability of the DNA complexes of apaMyoD was increased by 13 degrees C relative to MyoD-bHLH. Measurements of the fluorescence anisotropy change on DNA binding indicated that apaMyoD bound to E-box-containing DNA sequences with enhanced affinity relative to MyoD-bHLH. Consequently, the DNA binding specificity of apaMyoD was increased 10-fold.     

A Rapid,Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Dual role for phenylalanine 178 during catalysis by aristolochene synthase

A mutant of aristolochene synthase, in which Phe 178 was replaced by Val, produced significant amounts of alpha-and beta-farnesene as well as alpha and beta-selinene and selina-4,11-diene, suggesting that Phe 178 is involved in the stabilisation of transition states preceding germacrene A and following eudesmane cation.     

Evidence for environmentally coupled hydrogen tunneling during dihydrofolate reductase catalysis

Hydride transfer during catalysis by dihydrofolate reductase from Thermotoga maritima has been studied by stopped flow spectroscopy. The reduction of dihydrofolate by NADPH showed a biphasic temperature dependence of the deuterium kinetic isotope effect. At temperatures above 25 degrees C the KIE was temperature independent, while the reaction rates were strongly temperature dependent. Below 25 degrees C the KIE becomes dependent on temperature, and the ratio of the preexponential factors is inverse, suggesting a greater role for active dynamics that modulate the tunneling distance.     

Development of an HPLC method for determination of pentachloronitrobenzene, hexachlorobenzene and their possible metabolites

Background

Pentachloronitrobenzene (PCNB) and hexachlorobenzene (HCB) are highly toxic and widespread in every environmental compartment. Some of metabolic products such as amino/nitro containing chlorinated aromatic compounds can be determined by gas chromatography coupled with electron capture detector (GC-ECD). However, it is difficult to identify some of chlorophenolic and chloroquinolic intermediates produced from PCNB and HCB by the above mentioned technique. Therefore, for analysis of these compounds and their metabolites, we have developed a high performance liquid chromatography (HPLC) based method.

Results

The extraction of PCNB and HCB from soil and minimal salt medium was carried out with ethyl acetate and hexane respectively with good recoveries (98% for PCNB and 97% for HCB). The validation of the proposed extraction and HPLC method was done by analysis of PCNB and HCB biodegradation and their metabolites identification from anaerobic enriched soil samples.

Conclusion

A rapid, sensitive and simple HPLC based analytical method was developed for the analysis of PCNB, HCB and their possible intermediates.