Halomethanes in tri-n-octylamine and squalane mixtures at infinite dilution

The retention behavior of eight halomethanes and four saturated hydrocarbons was measured in gas chromatographic stationary phases consisting in tri-n-octylamine (TOA), squalane (SQ) and six TOA+SQ mixtures, at 55.0, 58.5, 62.5 and 65.0°C. Equlibrium constants for complex formation were extracted from experimental data by using a lattice model developed by Martire. The results may be interpreted in terms of the formation of weak hydrogen-bonded complexes, with sociation constants of about 0.13 L-mol^–1 for haloforms and 0.07 L-mol^–1 for dihalomethanes at 60°C.     

Solubility parameter determination of cationic surfactants by inverse GC

Summary The solubility parameters of cationic surfactants were obtained using the inverse gas chromatographic technique. The surfactants didodecyl dimethyl ammonium bromide, dioctadecyl dimethyl ammonium bromide and dodecyl pyridinium chloride were used as stationary phase and retention data of different probe solutes were measured at different temperatures. The results were analysed by the combination of Flory-Huggins and Hildebrand theories, and the solubility parameters of the surfactants were obtained in a range of temperatures between 80–120°C.     

Two different strategies for the fluorimetric determination of piroxicam in serum

Two different spectrofluorimetric methods for the determination of piroxicam (PX) in serum are presented and discussed. One of them is based on the use of three-way fluorescence data and multivariate calibration performed with parallel factor analysis (PARAFAC) and self-weighted alternating trilinear decomposition (SWATLD). This methodology exploits the so-called second-order advantage of the three-way data, allowing to obtain the concentration of the studied analyte in the presence of any number of uncalibrated (serum) components. The method was developed following two different procedures: internal standard addition and external calibration with standard solutions, which were compared and discussed. The second approach investigated is based on the combination of solid-phase extraction (SPE) and room temperature fluorimetry. Both methods here presented yield satisfactory results. The concentration range in which PX could be determined in serum was 1–10 μg ml⁻¹. The limits of quantification for the experimental solutions using the chemometric approach were 0.09 μg ml⁻¹ for the standard addition mode and 0.12 μg ml⁻¹ using external calibration (both for PARAFAC and SWATLD algorithms). In the solid-surface fluorimetric method, the calibration graph was linear up to 0.22 μg ml⁻¹ and the limit of quantification was 0.02 μg ml⁻¹.     

Characterization of three agave species by gas chromatography and solid-phase microextraction-gas chromatography-mass spectrometry

Steam distillation (SD) extraction-solid-phase microextraction coupled to GC-MS was developed for the determination of terpenes and Bligh-Dyer extraction-derivatization coupled with GC for the determination of fatty acids such as ethyl esters were used. It was found that the three different Agave species have the same profile of fatty acids; the quantity of these compounds is different in each Agave variety. On the other hand, different terpenes were identified in the three Agave plants studied: nine in A. salmiana, eight in A. angustifolia and 32 in A. tequilana Weber var. azul.     

First- and second-order multivariate calibration applied to biological samples: determination of anti-inflammatories in serum and urine

First- and second-order multivariate calibration of fluorescence data have been compared as regards the determination of anti-inflammatories and metabolites in the biological fluids serum and urine. The simultaneous resolution of naproxen-salicylic acid mixtures in serum and naproxen-salicylic acid-salicyluric acid mixtures in urine was accomplished and employed for a discussion of the relative advantages of the applied chemometric tools. The analysis of second-order fluorescence excitation-emission matrices was performed using iteratively reweighted generalized rank annihilation method (IRGRAM), parallel factor analysis (PARAFAC), and self-weighted alternating trilinear decomposition (SWATLD). The results were compared with first-order fluorescence emission data analyzed with partial least-squares regression (PLS). In all cases, the performance of the methods was improved through the formation of inclusion complexes of the analytes with beta-cyclodextrin. The concentration ranges in which the analytes could be determined were as follows: naproxen, 0-250 ng mL(-1) in serum and 0-200 ng mL(-1) in urine; salicylic acid, 0-500 ng mL(-1) in serum and 0-300 ng mL(-1) in urine, and salicyluric acid, 0-300 ng mL(-1) in urine.     

Effect of asymmetry on the electronic delocalization in diiron and iron-cobalt mixed valence metallocenic compounds

In this work, we report the synthesis and a study on the degree of electronic delocalization in the asymmetric mixed valence complexes [CpFe(C(8)H(6))Fe(C(8)H(7))](+), 3a(+), and [CpCo(C(8)H(6))Fe(C(8)H(7))](+), 3b(+), (Cp = C(5)Me(5), C(8)H(6) = pentalenyde, C(8)H(7) = hydropentalenyde, and = ((3,5(CF(3))(2)C(6)H(3))(4)B(-))). Electrochemical methods, (57)Fe M?ssbauer spectroscopy, electronic spectroscopy, and electron paramagnetic resonance were used for this purpose. Although the anti conformation of the complexes precludes any metal-metal interaction, all the techniques employed show that 3a(+) is a electronic delocalized system, while 3b(+) behaves as two individual metallic centers with localized electron density.     

Metal-catalyzed anaerobic disproportionation of hydroxylamine. Role of diazene and nitroxyl intermediates in the formation of N2, N2O, NO+, and NH3

The catalytic disproportionation of NH(2)OH has been studied in anaerobic aqueous solution, pH 6-9.3, at 25.0 degrees C, with Na(3)[Fe(CN)(5)NH(3)].3H(2)O as a precursor of the catalyst, [Fe(II)(CN)(5)H(2)O](3)(-). The oxidation products are N(2), N(2)O, and NO(+) (bound in the nitroprusside ion, NP), and NH(3) is the reduction product. The yields of N(2)/N(2)O increase with pH and with the concentration of NH(2)OH. Fast regime conditions involve a chain process initiated by the NH(2) radical, generated upon coordination of NH(2)OH to [Fe(II)(CN)(5)H(2)O](3)(-). NH(3) and nitroxyl, HNO, are formed in this fast process, and HNO leads to the production of N(2), N(2)O, and NP. An intermediate absorbing at 440 nm is always observed, whose formation and decay depend on the medium conditions. It was identified by UV-vis, RR, and (15)NMR spectroscopies as the diazene-bound [Fe(II)(CN)(5)N(2)H(2)](3)(-) ion and is formed in a competitive process with the radical path, still under the fast regime. At high pH's or NH(2)OH concentrations, an inhibited regime is reached, with slow production of only N(2) and NH(3). The stable red diazene-bridged [(NC)(5)FeHN=NHFe(CN)(5)](6)(-) ion is formed at an advanced degree of NH(2)OH consumption.     

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) to estimate binding constants of receptors to ligands

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) is used to determine binding constants between vancomycin (Van) from Streptomyces orientalis, teicoplanin (Teic) from Actinoplanes teicomyceticus and ristocetin (Rist) from Nocardia lurida to d-Ala-d-Ala terminus peptides and carbonic anhydrase B (CAB, E.C.4.2.1.1) to arylsulfonamides. Two variations of PFMIACE are described herein. In the first technique, the capillary is partially filled with ligand at increasing concentrations, a non-interacting standard, three or four separate plugs of receptor each separated by small plugs of buffer, a plug containing a second non-interacting standard, and then electrophoresed in buffer. Upon continued electrophoresis, equilibrium is established between the ligand and receptors causing a shift in the migration time of the receptors with respect to the non-interacting standards. This change in migration time is utilized for estimating multiple binding constants (K_b) for the same interaction. In the second technique, separate plugs of sample containing non-interacting standards, peptide one, buffer, and peptide two, were injected into the capillary column. The capillary is partially filled with a series of buffers containing an antibiotic at increasing concentrations and electrophoresed. Peptides migrate through the column at similar electrophoretic mobilities since their charge-to-mass ratios are approximately the same but remain as distinct zones due to the buffer plug between peptides. Upon electrophoresis, the plug of antibiotic flows into the peptide plugs affecting a shift in the migration time of the peptides with respect to the non-interacting standards occurs due to formation of the of the antibiotic-peptide complex. The shift in the migration time of the peptides upon binding to the antibiotic is used for the Scatchard analysis and measurement of a K_b. The PFMIACE technique expands the functionality and potential of ACE as an analytical tool to examine receptor-ligand interactions. In PFMIACE, a smaller amount of sample is required in the assay compared to both conventional ACE and MIACE. Furthermore, a wide array of data is obtained from a single experiment, thus, expediting the assay of biological species.     

Spectrophotometric determination of selenium(IV) with 5,5-dimethyl-1,3-cyclohexanedione

5,5-Dimethyl-1,3-cyclohexanedione (dimedone) reacts in acid aqueous solution with selenium(IV) to give a benzoxaselenol which has an absorption maximum at 313 nm with a molar absorptivity of 4.00 x 10(3) l.mole(-1).cm(-1). The compound is extractable into chloroform, to give a solution with an absorption maximum at 300 nm with a molar absorptivity of 3.77 x 10(3) l.mole(-1).cm(-1). The calibration graph is linear up to 30 ppm selenium, with a detection limit of 0.1 ppm in the final solutions. Of the various other ions tested, only iron(III) interferes at all concentrations but the addition of 1000 ppm fluoride will mask 50 ppm Fe(3+). The method has good reproducibility, with a relative standard deviation of 1.0% for pure solutions. The method has been applied to the analysis of fire-refined copper.     

Synthesis, structure and properties of ruthenium(II) complexes with quinolinedione derivatives as chelate ligands: Crystal structure of [Ru(CO)2Cl2(6-methoxybenzo[g]quinoline-5,10-dione)]

The reaction of the dimer complex [{Ru(CO)₃Cl₂}₂] with the ligands 4,6-dichloroquinoline-5,8-dione and 6-methoxybenzo[g]quinoline-5,10-dione in ethanol solution led to the neutral mononuclear complexes of general formula [Ru(CO)₂Cl₂(κ²-quinolinedione-N,O)]. The complexes were characterized by elemental analysis, IR and RMN spectroscopy, and the molecular structure of [Ru(CO)₂Cl₂(6-methoxybenzo[g]quinoline-5,10-dione)] was determined by single-crystal X-ray diffraction. The redox chemistry of ligands and complexes was investigated by cyclic voltammetry, and their potential antitumor activity was also evaluated.