Copper(II) chloride complexes with multimodal ligands based on the cyclotriphosphazene platform

The reaction of hexakis(2-pyridyloxy)cyclotriphosphazene (L) and hexakis(4-methyl-2-pyridyloxy)cyclotriphosphazene (MeL) with copper(ii) chloride afford the complexes [CuLCl(2)], [(CuCl(2))(2)(MeL)], [CuLCl]PF(6) and [Cu(MeL)Cl]PF(6). The single-crystal X-ray structure of [CuLCl(2)] shows the copper ion to be in a square based pyramidal distorted trigonal bipyramidal (SBPDTBP) environment (tau= 0.47) with L acting as a kappa(3)N donor, coordinating via the nitrogen atoms from two non-geminal pyridyloxy pendant arms, a nitrogen atom in the phosphazene ring and two chloride ions. In the dimetallic complex, [(CuCl(2))(2)(MeL)], the geometry about both (symmetry related) copper(ii) centres is also SBPDTBP (tau= 0.57) with a 'N(3)Cl(2)' donor set. In the monocation of [CuLCl]PF(6), L acts as a kappa(5)N donor, bonding to the copper(ii) centre through the nitrogen atoms of four pyridyloxy pendant arms, a phosphazene ring nitrogen atom and a chloride ion to give an elongated rhombic octahedral coordination sphere. The phosphazene ring atoms remain virtually coplanar in all three structures as a consequence of the phenoxy-hinge, which links the pyridine pendant donors to the cyclotriphosphazene platform, allowing the formation of six-membered chelate rings. The spectroscopic (mass spectral, EPR and electronic) and magnetic properties of the complexes are discussed. The EPR and variable temperature magnetic susceptibility results for the dicopper complex, [(CuCl(2))(2)(MeL)], point to a very weak electronic interaction between the metal atoms.     

In situ Fourier transform infrared spectroscopy as an efficient tool for determination of reaction kinetics

The performance of new FTIR-based monitoring technology to representatively determine reaction kinetics has been demonstrated on an example of homogeneously catalyzed liquid-phase sucrose hydrolysis to fructose and glucose. The reaction kinetics were investigated by using the ReactIR 1000 reaction analysis system, which enables determination of the component concentration from its characteristic FTIR spectrum. During the sucrose inversion, the ReactIR 1000 instrument connected to a computer controlled standard glass batch reactor provided the required operating conditions and information about the component concentration in real-time. We have studied the influence of hydrogen ion concentration, temperature and initial concentration of sucrose on the sucrose disappearance rate. It was found out that the inversion of sucrose is an irreversible reaction, which is not affected by the formation of fructose and glucose in the liquid-phase. Then, the parameters of the kinetic model (i.e., reaction rate constant and activation energy) were calculated. A comparison of the model output and the measured data showed that the kinetics of the sucrose inversion could be well described by means of the pseudo first-order kinetic model. Finally, the method of determining the kinetic model by FTIR spectroscopy was verified by comparing the results obtained in the batch reactor with the results obtained in the continuously stirred tank reactor.     

π-Olefin—iridium -komplexe : III. Über (η4-cyclodien)(η5-cyclodienyl)iridium-verbindungen,einen neuartigen hydridoiridium-komplex und das (η4-cyclooctadien)(η6-cyclooctatrien)iridium-kation

The complexes [Ir(COD)(η⁵-C₇H₉)] and [Ir(COD)(η⁵-C₈H₁₁)] are obtained by the isoprophyl Grignard synthesis of [Ir(COD)Cl]₂ (COD = η⁴-1,5-cyclooctadiene) in the presence of cycloheptatriene, and cyclooctatriene, respectively. The later reaction yields [IrH(COD)(δ⁴-1,3,6-C₈H₁₀)] as a by-product which, in contrast to other [IrH(η⁴-cyclodiene)₂] complexes, does not show H-addition-elimination equilibria. Reduction of [Ir(1,3-C₇H₁₀)₂Cl] with C₂H₅OH/Na₂CO₃ yields [Ir(η⁴-1,3-C₇H₁₀)](η⁵-C₇H₉)] which was characterized by X-ray analysis. [Ir(COD)Cl]₂ reacts with Na₂C₈H₈, and after hydrolysis unstable [Ir(COD)(η⁵-C₈H₉)] is formed which by protonation with HPF₆ is converted into the [Ir(COD)(η⁶-1,3,5-C₈H₁₀)]⁺ cation. All these compounds are fluxional in solution.     

TPR, TPO, and TPD examinations of Cu0.15Ce0.85O(2-y) mixed oxides prepared by co-precipitation, by the sol-gel peroxide route, and by citric acid-assisted synthesis

Temperature-programmed reduction (TPR), oxidation (TPO), and desorption (TPD) studies were performed on three copper-ceria mixed oxide samples having the same nominal composition, Cu0.15Ce0.85O(2-y), but prepared in three different ways: by co-precipitation, the sol-gel peroxide route, and the sol-gel citric acid route. The obtained results reveal that despite a drastic initial drop in specific surface area after consecutive redox cycles, the hydrogen consumption remains constant. This is because CuO is highly dispersed over the surface of CeO2 nanocrystallites and remains highly dispersed even after the agglomeration of CeO2 nanocrystallites in a denser secondary structure. The dispersed CuO is reduced to Cu(0) during the TPR, forming agglomerated metal particles on the surface of partially reduced CeO2. However, after subsequent temperature-programmed oxidation all the Cu(0) is oxidized back into CuO and redispersed over the CeO2 crystallites.     

Micro-method for the determination of roxithromycin in human plasma and urine by high-performance liquid chromatography using electrochemical detection

A simple and sensitive high-performance liquid chromatographic micro-method for the determination of roxithromycin in human plasma and urine is described. A dichloromethane extract of the sample was chromatographed on a C18 reversed-phase column with acetonitrile-83 mM ammonium acetate-methanol (55:23:22, v/v) adjusted to pH 7.5 with acetic acid as the mobile phase. Roxithromycin and the internal standard, erythromycin, were detected by dual coulometric electrodes operated in the oxidative screen mode. The applied cell potential of the screen electrode was set at +0.7 V and the sample electrode at +0.9 V. The intra- and inter-assay coefficients of variation were less than or equal to 7.0%. The detection limit (signal-to-noise ratio = 3) was 0.1 microgram/ml for both plasma and urine. A study of drug stability during sample storage at 4, 20 and 37 degrees C showed no degradation of roxithromycin. The method is convenient for clinical monitoring and pharmacokinetic studies.     

Comparison of capillary electrophoresis with traditional methods to analyse bovine whey proteins

The separation of the four major whey proteins by sodium dodecyl sulphate (SDS)-capillary gel electrophoresis (CGE) is described. Whilst commercially purified whey proteins could be analysed using the recommended protocol, the more complex nature of an acid whey and a reconstituted whey protein concentrate (WPC) powder necessitated considerable refinement of the CGE sample buffer. Individual whey proteins in the acid whey and WPC samples were then also separated and quantitated using capillary zone electrophoresis, polyacrylamide gel electrophoresis (PAGE) and HPLC methods and the results were compared. The values obtained for -lactalbumin (-Lac) and β-lactoglobulin (β-Lg) were consistent throughout the various methods, although size-exclusion HPLC, SDS-PAGE and SDS-CGE could not separate the two β-Lg variants or the glycosylated form of -Lac from the β-Lg. There was considerable variation in the values for the bovine serum albumin and immunoglobulin determined by the different methods and it was concluded that none of the methods could satisfactorily quantitate all four whey proteins.     

The synthesis of 6,6′-cyclo-6′-deoxyhexofuranosyluracils via a diazomethane-promoted ring-enlargement reaction

The protected 5′-oxo-6,5′-cyclouridine 13 reacts with diazomethane to afford mostly the spiro-epoxide 18 (79%), but it also undergoes ring-expansion to give the corresponding 5′-oxo-6,6′-cyclonucleoside 16. Under the conditions of the reaction, ketone 16 reacts further with diazomethane to give the enol ether 20 (12% overall), the isomeric 4-methoxy nucleoside 15 (2%), and the spiro-epoxide 19 (4.4%). Acid hydrolysis of the enol ether 20 , followed by reduction of the resulting ketone with sodium borohydride, affords a separable mixture of the 5′S (L-talo) and 5′R (D-allo) methylene-bridged cyclonucleosides 7 and 8 , respectively. From proton nmr measurements, it appears that the 6′-methylene groups of these cyclonucleosides project towards the 2′,3′-edge of the furanose ring.     

Oxygen transport in La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>3−δ</Subscript>

The surface exchange coefficient and chemical diffusion coefficient of oxygen for the perovskites La_0.6Sr_0.4Co_1–yFe_yO_3– (y=0.2, 0.5 and 0.8) were measured using the conductivity relaxation technique. Measurements were performed between 600 and 800 °C in an oxygen partial pressure range between 10^–4 and 1 bar. Both transport coefficients decrease markedly with decreasing oxygen partial pressure below about 10^–2 bar at all temperatures. This is attributed to ordering of oxygen vacancies. Implications for using La_0.6Sr_0.4Co_1–yFe_yO_3– as an oxygen separation membrane are discussed.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10-12 April 2003     

Using staggered grids with characteristic boundary conditions when solving compressible reactive Navier–Stokes equations

A specific (hybrid) arrangement of variables is discussed to solve reactive compressible Navier–Stokes equations on staggered‐like grids with high‐order finite difference schemes. The objective is to improve the numerical flow solution at boundaries. Hybrid arrangement behaviour is compared with ‘pure’ colocated and staggered strategies. Classical Fourier analysis shows accuracy to be significantly improved in the hybrid case. One‐dimensional laminar flame test demonstrates increased robustness (in terms of mesh resolution), whereas computation of 1D exiting pressure wave propagation gives evidence that the method also improves accuracy in the prediction of non‐reflecting outflows, compared e.g. with the fully staggered scheme of (J. Comput. Phy. 2003). Multidimensional extension is illustrated through turbulent 2D planar and 3D expanding flames simulations. Copyright © 2011 John Wiley & Sons, Ltd.