Proton-conducting I-Carrageenan-based biopolymer electrolyte for fuel cell application

The essential part of electrochemical devices, such as fuel cells and batteries, is the polymer electrolyte with good mechanical, thermal, and chemical stability. The search for a new proton-conducting membrane with easy processability, non-toxic, and low-cost has been growing rapidly. The bio-based polymer electrolytes are now receiving much attention due to the green environment. Among the commercially available biopolymers, iota-Carrageenan (I-Carrageenan) is one of the biopolymer with good film-forming nature and with good mechanical stability. I-Carrageenan-based biopolymer membranes doped with ammonium bromide (NH₄Br) have been prepared using solution-casting technique, and distilled water is used as a solvent. The prepared I-Carrageenan-based biopolymer membranes have been characterized using FTIR, XRD, and AC impedance techniques. The complexation between the polymer and salt has been revealed by FTIR. The increase in the amorphous nature of the film due to the addition of salt has been confirmed by XRD. From AC impedance technique, the conductivity of pure I-Carrageenan has been found to be 1.46 × 10⁻⁵ S/cm. The addition of different wt% of NH₄Br increases the conductivity and reaches the highest value of 1.08 × 10⁻³ S/cm for 20% NH₄Br, and the conductivity decreases on further addition of NH₄Br due to the formation of ion aggregates.

     

Lithium ion-conducting polymer electrolytes based on PVA–PAN doped with lithium triflate

Ionics - Blend polymer electrolytes with optimized composition (92.5 PVA:7.5 PAN) doped with lithium triflate (LiCF3SO3) have been prepared in different concentrations by solution casting...     

Characterization of biodegradable solid polymer electrolyte system based on agar-NH4Br and its comparison with NH4I

Journal of Solid State Electrochemistry - Concerning the pollution-free and eco-friendly materials, the prospect of using biopolymer as ion conducting matrix has been investigated in this study....     

Tamarind seed polysaccharide (TSP)-based Li-ion conducting membranes

Polysaccharide-based biopolymers have gained much attention in electrochemical devices recently. Tamarind seed polysaccharide (TSP) is a biopolymer obtained from the extract of tamarind seed. It is used as thickening and gelling agent in food and textile industries. There are no works in polymer electrolytes based on TSP in lithium-ion conducting membranes. A pure TSP membrane has been prepared by dissolving 1 g of TSP in distilled water by using solution-casting technique. The prepared biopolymer membranes are subjected to Fourier transform infrared (FTIR), X-ray diffraction (XRD), and AC-impedance techniques. FTIR analysis has been conducted to observe the possible interaction between the polymer and lithium salt based upon the changes in wave numbers of the peaks. The nature of the membrane (crystalline or amorphous) has been revealed by XRD. The electrical properties of the membranes have been analyzed by AC-impedance spectroscopy. The maximum ionic conductivity for the salt-doped membrane 1 g TSP:0.4 g lithium bromide (LiBr) has been found to be 4.83 × 10^?4 S cm^?1. The primary lithium-ion battery has been constructed using the best conductivity membrane, and the open circuit voltage (OCV) has been observed as 1.63 V.     

Stiffness of contacts between rough surfaces

The effect of self-affine roughness on solid contact is examined with molecular dynamics and continuum calculations. The contact area and normal stiffness rise linearly with the applied load, and the load rises exponentially with decreasing separation between surfaces. Results for a wide range of roughness, system size, and Poisson ratio can be collapsed using Persson's contact theory for continuous elastic media. The compliance due to atomic-scale motion at the interface between solids has little effect on the area and normal stiffness, but can reduce the total transverse stiffness by orders of magnitude. The scaling of this effect with system size is discussed.     

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

Thin films of blend polymer electrolytes comprising poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) complexed with ammonium thiocyanate (NH₄SCN) salt in different compositions have been prepared by solution casting technique using distilled water as solvent. The prepared films have been investigated by different experimental techniques. The complexation of these films has been studied by FTIR spectroscopy. The increase in amorphousness of the films with increase in NH₄SCN content has been confirmed by XRD analysis. The addition of ammonium thiocyanate salt to PVA-PVP polymer blend shows a shift in T_g of the blend. The effect of salt concentration and temperature on the ionic conductivity of the polymer blend films has been analyzed using AC impedance spectroscopy. The maximum conductivity of 6.85 × 10^?4 S cm^?1 at room temperature has been observed for the blend with 50 mol% PVA-50 mol% PVP complexed with 40 mol% NH₄SCN. The activation energy has been found to be minimum (0.24 eV) for this sample. Wagner’s polarization technique shows that the charge transport in these blend films is predominantly due to ions. Using the highest conductivity blend polymer electrolyte, a proton battery has been fabricated and its discharge characteristics have been studied.     

The first stereoselective and the total synthesis of Leiocarpin C and total synthesis of (+)-Goniodiol

The synthesis of the styryl lactone Leiocarpin C has been achieved in a highly stereoselective manner using Jacobsen’s kinetic resolution, Sharpless asymmetric epoxidation and Sharpless asymmetric dihydroxylation as key steps. This is the first total synthesis of Leiocarpin C, and thus establishes for the first time the absolute stereochemistry of this natural product.     

Synthesis and characterization of Li<Subscript>1-x</Subscript>Tb<Subscript>x</Subscript>NiPO<Subscript>4</Subscript> solid solution as cathode materials for lithium ion battery application

Modified Pechini-type polymerizable precursor method has been used to prepare nanosized Li_1-xTb_xNiPO₄ (x = 0, 0.03, 0.05, and 0.07) solid solutions to obtain homogeneous with controlled stoichiometry and smaller particle size. The reaction temperature was determined by thermogravimetric (TG/DTA) analysis. X-ray diffraction analysis reveals the formation of orthorhombic structure and the calculated crystallite sizes are found to be in the range of 75–89 nm. Morphological, compositional, and vibrational properties were performed by SEM, EDAX, and FTIR, respectively. Conductivity measurements were carried out at room temperature by AC impedance analysis. The Li_0.97Tb_0.03Ni_0.99PO₄ sample shows one order of higher conductivity than pure LiNiPO₄. Higher concentration of terbium samples such as Li_0.95Tb_0.05Ni_0.99PO₄ and Li_0.93Tb_0.07Ni_0.99PO₄ lead to decrease of conductivity. The frequency dependency of dielectric permittivity, dielectric loss, and electric modulus of Li_1-x Tb_xNiPO₄ solid solutions are studied. The frequency-dependent plot of modulus reveals that the conductivity relaxation is of non-Debye type.     

Development of proton conducting biopolymer membrane based on agar–agar for fuel cell

A proton-conducting polymer electrolyte based on agar and ammonium nitrate (NH₄NO₃) has been prepared through solution casting technique. The prepared polymer electrolytes were characterized by impedance spectroscopy, X-ray diffraction, and Fourier transform infra-red spectroscopy. Impedance analysis shows that sample with 60 wt.% NH₄NO₃ has the highest ionic conductivity of 6.57 × 10⁻⁴ S cm⁻¹ at room temperature. As a function of temperature, the ionic conductivity exhibits an Arrhenius behaviour increasing from 6.57 × 10⁻⁴ S cm⁻¹ at room temperature to 1.09 × 10⁻³ S cm⁻¹ at 70 °C. Transport parameters of the samples were calculated using Wagner’s polarization method and thus shows that the increase in conductivity is due to the increase in the number of mobile ions. Fuel cell has been constructed with the highest proton conductivity polymer 40agar/60NH₄NO₃ and the open circuit voltage is found to be 558 mV.

     

Synthesis and characterization of dextrin-based polymer electrolytes for potential applications in energy storage devices

An attempt has been made to synthesise a new proton conducting polymer electrolyte using the biopolymer dextrin doped with ammonium thiocyanate salts using solution casting technique. The complexation has been studied using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The differential scanning calorimetry (DSC) thermograms of dextrin with NH₄SCN showed that T_g value increases with respect to the increase of NH₄SCN concentration. The electrical conductivity was measured using AC impedance analyser which showed that ionic conductivity increases with increase in salt concentration up to 40%. Transference number measurement was carried out to investigate the nature of the charge transport species in the polymer electrolyte. Surface morphology of the electrolytes was determined using scanning electron microscope (SEM) studies, and the chemical composition of the elements present was determined using EDAX. The proton battery was constructed with the highest conducting polymer electrolyte Dex-40%NH₄SCN and its open circuit voltage with load were carried out.