Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

Curcumin: A naturally occurring long‐wavelength photosensitizer for diaryliodonium salts

Curcumin, a naturally occurring, intensely yellow dye extracted from the spice turmeric, is an efficient photosensitizer for diaryliodonium salt photoinitiators at wavelengths ranging from 340 to 535 nm. With curcumin as a photosensitizer, it is possible to carry out the cationic photopolymerization of a wide variety of epoxide, oxetane, and vinyl monomers with long‐wavelength UV and visible light. An example of the photopolymerization of an epoxide monomer with ambient solar irradiation is provided. Several other curcumin analogues were synthesized, and their use as photosensitizers is examined. With such photosensitizers, the range of spectral sensitivity can be extended well into the visible region of the electromagnetic spectrum. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5217–5231, 2005     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Construction of nonanuclear supramolecular structures from simple modular units

A porphyrazine based supramolecule with a nonanuclear structure has been prepared by the ready coordination of pyridine donor sites in octakis(4-pyridoxyethylthio)porphyrazinatomagnesium with vanadyl bis(acetylacetonate) and characterized by EPR spectroscopy.     

Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

Aspartame adduct of copper(II) chloride Cu(Asp)₂Cl₂·2H₂O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.     

Lavandulifolioside: A New Phenylpropanoid Glycoside from Stachys lavandulifolia

A new phenlypropanoid glycoside has been isolated from the methanolic extract of the aerial parts of Stachys lavandulifolia (Lamiaceae), lavandulifolioside (1) . On the basis of chemical and spectral data the structure of the new compound 1 has been elucidated as β-(3,4-dihydroxyphenyl)ethyl O-α-L -arabinopyranosyl-(1→2)-α-L -rhamnopyranosyl-(1→3)-4-O-caffeoyl-β-D -glucopyranoside.     

Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Oxygen/nitrogen ordering in lanthanum new phase (La3Si8N11O4)

High-resolution ¹⁷O NMR spectra have been collected for crystalline samples of lanthanum new phase, La₃Si₈N₁₁O₄. In conjunction with previously published ²⁹Si and ¹⁵N spectra obtained for this phase, and in the light of the high-quality crystal structure data reported recently, a more detailed interpretation of the NMR spectra is presented than was possible in previous studies. The non-bridging oxygens in the structure are responsible for the single sharp peak seen in the ¹⁷O spectrum at 188 ppm; the remaining oxygens, occupying bridging sites shared with nitrogen, show up only weakly on the ¹⁷O spectrum as a broad diffuse band centered around zero ppm. The peak at −57.3 ppm on the ²⁹Si spectrum is believed to correspond to an overlap of [SiN₄] and [SiON₃] environments, with the −68.2 ppm peak corresponding to an [SiO₂N₂] environment.