Soap-free emulsion polymerization of poly (methyl methacrylate-co-butyl acrylate): effects of anionic comonomers and methanol on the different characteristics of the latexes

Soap-free emulsion polymerization (SFEP) of methyl methacrylate, butyl acrylate was conducted in water/methanol media with sodium salts of four different acidic comonomers, namely styrene sulfonic acid (NaSS), 2-acrylamide-2-methyl-1-propane sulfonic acid (NaAmps), acrylic acid (NaAA), and itaconic acid (Na₂ita). It was found that the introduction of methanol as co-solvent (35 wt%) to the medium greatly decreases the amount of water-soluble polyelectrolyte in the cases NaAA and Na₂ita while it does not make difference for NaSS and NaAmps. Having employed the concept of conductance dependency to the ion mobility, the onset concentration in which soluble chains were formed was detected. The addition of sulfonic-based comonomers (NaSS and NaAmps), first decreased particle size and then led to predomination of solution polymerization over SFEP. On the contrary, the incorporation of carboxylic-based comonomers (NaAA and Na₂ita) led to increase in particle size. Moreover, the particle size results were in good qualitative agreement with the classical Smith–Ewart theory.     

Synthesis of Polymer Nanoparticles in the Presence of Diatoms as Sustainable Bio-Templates

Colloid Journal - Preparation of complex nano- and micron-sized non-spherical particulate geometries still remains a challenge. One potential approach is the utilization of natural templates with...     

Synthesis of monodisperse anionic submicron polystyrene particles by stabilizer-free dispersion polymerization in alcoholic media

In this work, monodisperse polystyrene (PS) particles were synthesized in ethanol/water medium using sodium salt of styrene sulfonic acid and 2,2′-azobis(isobutyronitrile) as ionic comonomer and nonionic initiator, respectively. The polymerization was carried out at low agitation speed, and no stabilizer (or surfactant) was added to the polymerization medium. This polymerization system (stabilizer-free dispersion polymerization) was initiated as a homogeneous solution of monomer, comonomer, medium, and initiator. With the production of free radicals, polymerization developed into a heterogeneous system. The effect of various polymerization conditions on the size and size distribution of the obtained particles was evaluated. The experimental results showed that with an increase in ethanol content, the size of the particles increased while no significant change was observed in particle size distribution. Furthermore, with increasing ionic comonomer content, the size of the particles decreased and their size distribution became broader. Moreover, it was observed that addition of an electrolyte to the polymerization medium also increased the particles’ size and broadened their size distribution. It is noteworthy to point out that the coagulation occurred in higher amounts of electrolyte. Finally, it is concluded that the polar component of Hansen solubility parameter of the polymerization medium affects the particle size and particle size distribution greatly.     

Controlled Cu content of electrodeposited CoCu nanowires through pulse features and investigations of microstructures and magnetic properties

CoCu alloy nanowire arrays embedded in anodic alumina template were fabricated by ac pulse electrodeposition. Different off-times between pulses in an electrolyte with constant concentration of Co⁺² and Cu⁺² and acidity of 4 were employed. The effect of deposition parameters on the alloy contents, microstructures and magnetic properties of Co_xCu_1−x nanowires were studied. It is shown that Co content decreased by increasing the off-time between pulses in a wide range (x = 0.53-0.07). These results are in consistence with saturation magnetization, which was reduced with increase in the off-time between pulses. It was also found that by optimizing the off-times, it is possible to fabricate CoCu nanowires with mixed phase of hcp Co, fcc Cu and fcc CoCu crystal phase.