Simulation model for shapiro time delay and light deflection experiments

The time delay experiment proposed by I.I. Shapiro in 1964 and conducted in the seventies was the most precise experiment of general relativity until that time. Further experimentation has improved the accuracy level of both the time delay and the light deflection experiments. A simulation model is proposed that involves only a simple mass and time transformation factor involving velocity of light. The light deflection and the time delay experiments are numerically simulated using this model that does not use the general relativistic equations. The computed values presented in this paper compare well with recent levels of accuracy of their respective experimental results.     

Chemically enhanced alpha-energy spectroscopy in liquids

Summary The determination of transuranic (TRU) content in nuclear wastes, reactor materials, process solutions, and various other matrices is required in support of material assessment, environmental restoration, and waste processing activities. We have found that direct measurement of TRU is possible using surface passivated ion implanted planar silicon diode detectors. The performance and durability of modern silicon diodes enables direct detection of alpha-particles, with retention of some spectral information, through small air gaps or under direct contact with liquid or solid samples. We will present results on the performance of silicon diode detectors for the determination of TRU in liquids.     

Response of a benzoxainone derivative linked to monoaza-15-crown-5 with divalent heavy metals

The response of a monoaza-15-crown-5 with an optically active aminobenzoxazinone moiety to divalent cations was investigated. The crown ether was found to undergo a strong emission shift to the blue when complexed with specific divalent metals that have ionic diameters between 1.9-2.4 A. Consequently the photoactive macrocycle is responsive to Mg(2+), Ca(2+), Ba(2+), Sr(2+), Cd(2+), and particularly responsive to Hg(2+)and Pb(2+). Macrocycle emission spectra are shown to be a function of cation concentration. Alkaline metal cations and smaller transition metals ions such as Ni(2+), Co(2+)and Zn(2+)do not cause significant changes in the macrocycle emission spectra. Emission, absorption, and complex stability constants are determined. Mechanisms of cation selectivity and spectral emission shifts are discussed. Challenges involving immobilization of the macrocycle while preserving its spectral response to cations are explored.     

Direct actinide assay with surface passivated silicon diodes

Summary The determination of transuranic (TRU) content in nuclear wastes, reactor materials, process solutions, and various other matrices is required in support of material assessment, environmental restoration, and waste processing activities. We have found that direct measurement of TRU is possible using surface passivated ion implanted planar silicon diode detectors. The performance and durability of modern silicon diodes enables direct detection of alpha-particles, with retention of some spectral information, through small air gaps or under direct contact with liquid or solid samples. We will present results on the performance of silicon diode detectors for the determination of TRU in liquids.     

Detection of Cd, Pb, and Cu in non-pretreated natural waters and urine with thiol functionalized mesoporous silica and Nafion composite electrodes

Electrochemical sensors have great potential for environmental monitoring of toxic metal ions in waters due to their portability, field-deployability and excellent detection limits. However, electrochemical sensors employing mercury-free approaches typically suffer from binding competition for metal ions and fouling by organic substances and surfactants in natural waters, making sample pretreatments such as wet ashing necessary. In this work, we have developed mercury-free sensors by coating a composite of thiol self-assembled monolayers on mesoporous supports (SH-SAMMS™) and Nafion on glassy-carbon electrodes. With the combined benefit of SH-SAMMS™ as an outstanding metal preconcentrator and Nafion as an antifouling binder, the sensors could detect 0.5 ppb of Pb and 2.5 ppb of Cd in river water, Hanford groundwater, and seawater with a minimal amount of preconcentration time (few minutes) and without any sample pretreatment. The sensor could also detect 2.5 ppb of Cd, Pb, and Cu simultaneously. The electrodes have long service times and excellent single and inter-electrode reproducibility (5% R.S.D. after 8 consecutive measurements). Unlike SAMMS™-carbon paste electrodes, the SAMMS™-Nafion electrodes were not fouled in samples containing albumin and successfully detected Cd in human urine. Other potentially confounding factors affecting metal detection at SAMMS™-Nafion electrodes were studied, including pH effect, transport resistance of metal ions, and detection interference. With the ability to reliably detect low metal concentration ranges without sample pretreatment and fouling, SAMMS™-Nafion composite sensors have the potential to become the next-generation metal analyzers for environmental and bio-monitoring of toxic metals.     

Medium-resolution autonomous in situ gamma detection system for marine and coastal waters

We are developing a medium-resolution autonomous in situ gamma detection system for marine and coastal waters. The system is designed to extract and preconcentrate isotopes of interest from natural waters prior to detection in order to eliminate signal attenuation of the gamma rays traveling through water and lower the overall background from the presence of naturally occurring radioactive isotopes (⁴⁰K and U–Th series radionuclides). Filtration is used to preconcentrate target isotopes residing on suspended particles, while chemosorption is employed to preferentially extract truly dissolved components from the water column. Used filter and chemosorbent media will be counted autonomously using two LaBr₃ detectors in a near 4-π configuration around the samples. A compact digital pulse processing system, developed in-house and capable of running in coincidence mode, is used to process the signal from the detectors to a small on-board computer. The entire system is extremely compact (9″ dia. × 30″ len.) and platform independent, but designed for initial deployment on a research buoy. A variety of commercial and in-house nano-porous chemosorbents have been selected, procured or produced, and these and filter and detector components have been tested.     

Superheated water extraction, steam distillation and SFE of peppermint oil

Superheated water extraction, steam distillation and supercritical fluid extraction (SFE) are compared for extraction of l-menthol, menthone, eucalyptol and other components of peppermint (mentha piperita) leaves. Different temperatures and pressures were investigated. SFE results at 25/40 °C and 6.5/8/10 MPa were comparable with those reported in the literature. Although SFE is a gentle way of extracting thermally unstable compounds, this method is too slow for commercial use in comparison with steam distillation at 100 °C. Superheated water extraction at 125/150 °C and 1–2 MPa exhibits higher extraction efficiency than the SFE method. Comparison of all experiments under the chosen conditions shows steam distillation to be the most effective extraction method. Received: 18 January 1998 / Revised: 9 April 1999 / Accepted: 15 April 1999     

Schur complement preconditioners for anisotropic problems

We present two new variants of Schur complement domain decompositionpreconditioners suitable for 2D anisotropic problems. Thesevariants are based on adaptations of the probing idea, describedby Chan et al (1992 Fifth Int. Symp. on Domain DecompositionMethods for Partial Differential Equations, Philadelphia: SIAM,pp 236-249), used in conjunction with a coarse grid approximationas introduced by Bramble et al (1986 Math. Comput. 47, 103-134).The new methods are specifically designed for situations wherethe coupling between neighbouring interfaces is stronger thanthe coupling within an interface. Taking into account this strongcoupling, one variant uses a multicolour probing technique toavoid distortion in the probe approximations that appear whenusing the method proposed by Chan et al. The second techniqueuses additional probe matrices to approximate not only the couplingwithin the interfaces but also the coupling between interfacepoints across the subdomains. This latter procedure looks somewhatlike an alternating line relaxation method for anisotropic problems,see Brandt (1977 Math. Comput.. 31, 333-390). To assess therelevance of the new preconditioners, we compare their numericalbehaviour with well known robust preconditioners such as thebalanced Neumann-Neumann method proposed by Mandel (1993 Commun.Numer. Methods Eng.. 9, 233-241).     

Simulation model for anomalous precession of the perihelion of mercury's orbit

The ‘anomalous perihelion precession’ of Mercury, announced by Le Verrier in 1859, was a highly controversial topic for more than half a century and invoked many alternative theories until 1916, when Einstein presented his theory of general relativity as an alternative theory of gravitation and showed perihelion precession to be one of its potential manifestations. As perihelion precession was a directly derived result of the full General Theory and not just the Equivalence Principle, Einstein viewed it as the most critical test of his theory. This paper presents the computed value of the anomalous perihelion precession of Mercury's orbit using a new relativistic simulation model that employs a simple transformation factor for mass and time, proposed in an earlier paper. This computed value compares well with the prediction of general relativity and is, also, in complete agreement with the observed value within its range of uncertainty. No general relativistic equations have been used for computing the results presented in this paper.     

Uranium dioxide in ionic liquid with a tri-n-butylphosphate-HNO3 complex--dissolution and coordination environment

Uranium dioxide can be dissolved directly in an imidazolium-based ionic liquid (IL) at room temperature with a tri-n-butylphosphate(TBP)-HNO(3) complex. The dissolution process follows pseudo first-order kinetics initially. Raman spectroscopic studies show the dissolved uranyl ions are coordinated with TBP in the IL phase with a molar ratio of (UO(2))(2+) : TBP = 1 : 2. The dissolved uranyl species can be effectively transferred to a supercritical fluid carbon dioxide (sc-CO(2)) phase. No aqueous phase is formed in either the IL dissolution or the supercritical fluid extraction process. Absorption spectra of the extracted uranyl species in the sc-CO(2) phase suggests the presence of a UO(2)(TBP)(2)(NO(3))(2) and HNO(3) adduct probably of the form UO(2)(TBP)(2)(NO(3))(2)·HNO(3). The adduct dissociates in a water-dodecane trap solution during pressure reduction resulting in UO(2)(TBP)(2)(NO(3))(2) collected in the dodecane phase.