Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.     

Addition of hydroxide to an isoelectronic series of bis-diazineplatinum(II) complex ions

Base hydrolysis of bis-bipyridylplatinum(II) occurs via a 1:1 intermediate adduct with hydroxide ion. The equilibrium constants for this 1:1 addition of hydroxide inwater to complex ions [PtL2]2+, where L=one of theisoelectronic set 2,2-bipyridyl (bpy); 2,2- bipyrazine (bpz); 3,3-bipyridazine (bpdz) and 2,2- bipyrimidine (bpym) are respectively (as log10K at 25°C): 4.23; 4.59; 3.82; 6.14. This result is rationalized in terms of addition at the 6–position of the ligand.     

Metallo Phthalocyanines bearing 2‐Isopropyl‐6‐methylpyrimidin‐4‐yloxy Substituents: Synthesis,Characterization, Aggregation Behavior,Antioxidant and Antibacterial Activity,and Electronic Properties

A novel phthalonitrile derivative bearing 2‐isopropyl‐6‐methylpyrimidin‐4‐yloxy substituents at peripheral positions was synthesized by a nucleophilic substitution reaction. Metallophthalocyanines were obtained from the reaction of the novel phthalonitrile with metal Zn, Cu, Co, and Ni salts. The characterization of the compounds was performed using elemental analysis as well as UV/Vis, FT‐IR, and ¹H‐NMR spectroscopy. The aggregation behaviors of phthalocyanine complexes were also investigated. These metallophthalocyanines do not show any aggregation behavior between 10^–4–10^–6 M concentration range in THF. The antioxidant activities of the synthesized compounds were evaluated using three different tests: 2, 2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, and reducing power assays. All the compounds exhibited various antioxidant activities. In addition, antimicrobial activity of the compounds was tested over four gram positive and two gram negative bacteria. Moreover, the ground‐state geometries of the complexes were optimized using density functional theory (DFT) methods at B3LYP/6‐31G(d, p) level in order to obtain information about the 3D arrangements and electronic structure.     

N-CF3 Imidazolidin-2-one Derivatives via Photocatalytic and Silver-Catalyzed Cyclizations

While the N-trifluoromethylation of cyclic ureas is of interest for the potential to fundamentally change the properties of these biologically relevant moieties, the single synthetic procedure known to date describing their access only gives 4,4-disubstituted or fused aromatic cyclic N-CF₃ urea derivatives. We herein report an alternative approach to unleash access to the 4-monosubstituted imidazolidinone motif. The strategy relies on straightforward cyclization of readily accessible acyclic ureas, enabled by Ag-catalysis or light-assisted proton coupled electron transfer. The cyclic core is shown to be highly robust and amenable to various derivatizations, such as tandem Ni-catalysis, C−B, C−N, C−C cross couplings or C−H functionalizations, tolerating basic, nucleophilic and/or oxidizing conditions.     

Exogenous Sodium Nitroprusside Mitigates Salt Stress in Lentil (Lens culinaris Medik.) by Affecting the Growth,Yield, and Biochemical Properties

Soil salinity disrupts the physiological and biochemical processes of crop plants and ultimately leads to compromising future food security. Sodium nitroprusside (SNP), a contributor to nitric oxide (NO), holds the potential to alleviate abiotic stress effects and boost tolerance in plants, whereas less information is available on its role in salt-stressed lentils. We examined the effect of exogenously applied SNP on salt-stressed lentil plants by monitoring plant growth and yield-related attributes, biochemistry of enzymes (superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD)) amassing of leaf malondialdehyde (MDA) and hydrogen peroxide (H₂O₂). Salinity stress was induced by NaCl application at concentrations of 50 mM (moderate salinity) and 100 mM (severe salinity), while it was alleviated by SNP application at concentrations of 50 µM and 100 µM. Salinity stress severely inhibited the length of roots and shoots, the relative water content, and the chlorophyll content of the leaves, the number of branches, pods, seeds, seed yield, and biomass per plant. In addition, MDA, H₂O₂ as well as SOD, CAT, and POD activities were increased with increasing salinity levels. Plants supplemented with SNP (100 µM) showed a significant improvement in the growth- and yield-contributing parameters, especially in plants grown under moderate salinity (50 mM NaCl). Essentially, the application of 100 µM SNP remained effective to rescue lentil plants under moderate salinity by regulating plant growth and biochemical pathways. Thus, the exogenous application of SNP could be developed as a useful strategy for improving the performance of lentil plants in salinity-prone environments.     

Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Hazardous metal geochemistry of sedimentary phosphate rock used for fertilizer (Maz?dag, SE Anatolia, Turkey)

Composition of phosphate rocks mostly depend on their type and origin. Sedimentary rocks contain high concentration of heavy metals. Phosphate rocks are mainly used for the manufacturing of phosphate fertilizers. The contents of heavy metals Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn, as well as rare earth elements Ce, La, and Th were determined in sedimentary phosphate rock used for production of fertilizer in Turkey. The Kasrik-Semikan, Mazidag (Mardin, SE Anatolia, Turkey) high-grade phosphate rock used in this study is situated near the border with Syria and was deposited during the Turonian and Senonian (Cretaceous) ages. Total phosphorus (P) concentration in the rock is 18.5% on the average. Microwave acid digestion (MW-AD) followed by ?nductively Coupled Plasma-Optical Emission Spectrophotometry (ICP-OES) was carried out for the determination of all the elements of interest in phosphate rock. The results revealed that hazardous metal content of the phosphate rock was lower in Mazidag phosphate than that in samples imported from other countries and were within the safety limits.     

Contact welding study of carbon nanotube with ZnO nanowire

Study of proton beam induced welding of multiwall carbon nanotubes (MWCNTs) with ZnO nanowires (NWs) has been carried out by proton (H⁺) beam irradiation. The samples were irradiated by 70-keV proton (H⁺) ion beams at different substrate temperatures. The irradiation-induced defects in CNTs and ZnO NWs were greatly reduced at elevated temperature. The crystalline structure of ZnO NWs and MWCNTs were found to remain stable after the irradiation at 700 K. As a preparation step, a coupling of two parallel ZnO NWs with irradiation has also been demonstrated. The welding mechanisms of MWCNTs and ZnO NWs were also been suggested. These two welding processes between same and distinct nanostructures to form homo- and hetero-junctions have provided an opportunity to mass produce interconnecting one-dimensional structures used for the manufacturing of future nanowire-based electronic circuits and devices.     

Spectral Analysis of Some Distillates from Asphalt Cracking and Evaluation of UTIMAC as Cracking Catalyst

This paper demonstrates the spectral analysis of some distillates obtained from asphalt cracking in the presence of a conventional expensive catalyst, i.e., HZSM‐5, and local cheap and readily available clay, i.e., UTIMAC. Each distillate was fractionated into pentane soluble (PI) and pentane insoluble (PI) fractions based on solubility in n, pentane. Both PS and PI obtained in the case of HZSM‐5 and UTIMAC were analyzed by ¹H‐NMR spectrophotometry using CDCl₃ as dissolving solvent and tetramethylsilane (TMS) as internal standard. It is evident from the profiles that both catalysts caused the generation of some peaks ascribed to methylene and methene configurations in the aliphatic region. Bands corresponding to aromatic configurations were also generated. The results indicate that the cheap local catalyst used has comparable suitability with the conventional expensive catalyst in terms of asphalt cracking.