Adsorptive Behavior of Methylene Blue onto Sawdust of Sour Lemon,Date Palm,and Eucalyptus as Agricultural Wastes

In the present study, to remove methylene blue (MB) from aqueous solution, some agricultural residues and cheap bioadsorbents such as sawdust of palm trees, eucalyptus, and sour lemon were used. To do this, significant parameters like contact time, temperature, pH, initial concentration, and adsorbent dosage were checked. The results affirmed that the best conditions for MB adsorption from aqueous solution were obtained such as the temperature of 25?°C, pH of 8, adsorbent dosage of 2g/L, contact time of 120?minutes, and dye concentration of 5?mg/l which under these conditions the adsorption efficiencies determined were 95.8, 93.4, and 92.8% using sawdust of palm tree, eucalyptus, and sour lemon, respectively. Also, the equilibrium behavior of adsorbents showed that the Freundlich model could better predict the adsorption behavior of the process due to having a larger correlation coefficient (R²). The maximum biosorption capacities by Langmuir isotherm model were also obtained 54, 53.5, and 52.4?mg/g for sawdust of palm trees, eucalyptus, and lemon, respectively, which were significant amounts. In addition, kinetic behavior of adsorption showed that pseudo-second-order model can describe the kinetics of the adsorption process better than the pseudo-first-order model. Moreover, kinetic, equilibrium, and thermodynamic behaviors of adsorption affirmed that the biosorption process was desirable, physisorption, spontaneous, and exothermic.     

Spectrophotometric determination ofo- andp-phenylenediamines

Summary Cupric chloride-triphenylphosphine complex gives red color witho-phenylenediamine having maximum absorption at 505–520 nm and 0.5g/ml as visual limit of identification. The reaction is specific foro-phenylenediamine and obeys Beer's law (1 to 10g/ml). This reaction provides the basis of a new method for the Spectrophotometric determination ofo-phenylenediamine ing quantities.Ruthenium trichloride-triphenylphosphine complex gives blue color withp-phenylenediamine having maximum absorption at 580 nm and 2g/ml as visual limit of identification. On the basis of this color reaction a Spectrophotometric method for the determination ofp-phenylenediamine in hair dyes is described. The recovery of the dye from commercial preparations is better than 97%. Other organic compounds do not interfere.

---

Zusammenfassung Kupfer(II)chlorid-triphenylphosphin reagiert mito-Phenylendiamin unter Rotfärbung mit maximaler Absorption bei 505 bis 520 nm und 0,5g/ml als Erfassungsgrenze. Die Reaktion ist für o-Phenylendiamin spezifisch und folgt dem Beerschen Gesetz zwischen 1 und 10g/ml. Sie dient als Grundlage für eine neue Methode der spektrophotometrischen Bestimmung von Mikrogrammengen o-Phenylendiamin.Rutheniumtrichlorid-triphenylphosphin reagiert mit p-Phenylendiamin unter Blaufärbung mit maximaler Absorption bei 580 nm und 2g/ml als Erfassungsgrenze. Auf dieser Grundlage läßt sich p-Phenylendiamin in Haarfärbemitteln bestimmen. In handelsüblichen Präparaten werden mehr als 97% des enthaltenen Farbstoffes gefunden. Andere Verbindungen stören nicht.

     

4,4-Acetalidine-bis-(3-methyl isoxazolone-5) as a new colorimetric reagent for the determination of palladium and uranium

Summary Palladium and uranium react with 4,4-acetalidine-bis-(3-methyl isoxazolone-5) in acid medium to give yellow color having a visual limit of identification at 2 and 15g per ml. This color reaction provides the basis of a new method for colorimetric determination of palladium and uranium. Copper also gives yellow color but it cannot be determined with this color reaction because the color intensity is not stable. The maximum tolerable limit of various ions is reported.

---

Zusammenfassung Pd und U reagieren in saurem Milieu mit 4,4-Acetalidin-bis-(3-methyl-isoxazolon-5) unter Gelbfärbung mit einer Erfassungsgrenze von 2 bzw. 15g/ml. Diese Farbreaktion dient als Grundlage für eine neue kolorimetrische Methode für Pd und U. Cu gibt zwar auch eine Gelbfärbung, kann aber damit nicht bestimmt werden, da die Farbintensität nicht beständig ist. Die maximal tolerierbare Menge der Fremdionen wird angegeben.

     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Radiation-induced decoloration of oxazine in ethanolic solution

The decoloration yield of oxazine 720 in ethanolic solution was studied as a function of dose rate and concentration of the dye. Linear response for G values to a dose of 1.68 KGy was observed for various dye concentrations. The effect of various organic substances in the radiolysis of the dye was studied and the results were interpreted in terms of scavenging reactions.     

Spectrophotometric determination of isonicotinic acid hydrazide

Summary Isonicotinic acid hydrazide reacts with 2,3,5-triphenyltetrazolium chloride in acidic medium in presence of excess of thallium(III) to give a pink-coloured formazan having maximum absorption at 480 nm. This colour reaction is used to determine isonicotinic acid hydrazide in urine and blood. The reaction is specific for isonicotinic acid hydrazide, and the visual limit of identification is1 g per ml.

---

Zusammenfassung Isonikotinsäurehydrazid reagiert mit 2,3,5-Triphenyltetrazoliumchlorid in saurem Milieu bei Gegenwart von überschüssigem Thallium(III) unter Bildung eines rosa gefärbten Formazans mit dem Absorptionsmaximum bei 480 nm. Diese Farbreaktion wird zur Bestimmung von Isonikotinsäurehydrazid in Harn und Blut verwendet. Sie ist spezifisch. Ihre Erfassungsgrenze beträgt 1g/ml.

---

Résumé L'hydrazide de l'acide isonicotinique réagit avec le chlorure de triphényl-2,3,5 tétrazolium, en milieu acide en présence d'un excès de thallium-III, en donnant un formazan coloré en rose dont le maximum d'absorption se situe à 480 nm. On utilise cette réaction colorée pour doser l'hydrazide de l'acide isonicotinique dans l'urine et dans le sang. La réaction est spécifique et la limite d'identification visuelle est de 1g par ml.

     

Redox behavior of juglone in buffered aq.: Ethanol media

The present work reports the redox mechanism of 5-hydroxynaphthalene-1,4-dione (HND), commonly known as juglone, in buffered aqueous media having 50% of ethanol. HND followed different mechanistic routes depending upon the pH of the media and more than one pK_a were evaluated from the changes in the slope of the E_p vs. pH plot. The change of pH from acidic to neutral conditions was found to switch the mechanism from CEC to EE mechanism. Pulse techniques were utilized to determine the number of electrons involved in the oxidation and/or the reduction step and to ensure the nature of the redox process. Based upon the obtained results, an electrode reaction mechanism was proposed. Computational studies of HND supported the experimental results. UV-Visible spectroscopy was also employed for the detailed characterization of the compound in a wide range of pH and for the determination of its pK_a.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.