Air‐assisted liquid–liquid extraction coupled with dispersive liquid–liquid microextraction and a drying step for extraction and preconcentration of some phthalate esters from edible oils prior to their determination by GC

In this work, a new, cheap, simple, fast, and low organic solvent consuming procedure is proposed for isolation, enrichment, and gas chromatographic determination of some phthalate esters in edible oils. The method is based on a combination of air‐assisted liquid–liquid extraction and dispersive liquid–liquid microextraction followed by a drying step under N₂ gas. Several experimental parameters affecting both extraction and preconcentration steps were investigated and optimized. Under the optimum conditions for the proposed method, wide linear ranges (0.05–800 μg/L) and low detection limits (0.007–0.023 μg/L) were observed. The ranges of enrichment factors and extraction recoveries were 68–340 and 14–68%, respectively. Eventually, the target analytes were successfully determined in different edible oils using the proposed method.     

Highly stable copper/carbon dot nanofluid

Copper/carbon dot nanohybrids (Cu/CD NHs) were prepared via a facile precipitation method through a disproportionation reaction. The surface characterization was performed by various techniques such as XRD, FTIR and TEM. Then, water-based nanofluids composed of Cu/CD NHs at 0.1 and 0.5 mass% were prepared, and their thermo-physical properties including thermal conductivity, viscosity, density and specific heat were evaluated at various temperatures. The water-based Cu/CD nanofluid demonstrated to be a potential heat transfer fluid with a high stability. It was found that the thermal conductivity can be enhanced by increasing the nanoparticle concentration and temperature. Almost 1.25-fold increase in thermal conductivity has been achieved by raising the temperature up to 50 °C and at the concentration of 0.5 mass%. The heat capacity was found to increase with increasing concentration. Moreover, by increasing temperature the density and viscosity of the as-prepared nanofluid decreased, whereas the heat capacity showed an increasing trend.     

Flotation-assisted dispersive liquid–liquid microextraction method for preconcentration and determination of trace amounts of cobalt: Orthogonal array design

A simple, rapid, and efficient flotation-assisted dispersive liquid–liquid microextraction method was developed for preconcentration of trace amount of cobalt(II) ions. In this technique, a mixture of toluene and methanol (20: 80, v/v) was injected through the septum in the bottom of a narrow-bore tube containing cobalt solution. Afterwards, the fine droplets of extraction solvent were formed and cobalt (as 1-nitroso-2- naphtol complex) was collected on the surface of solution by aeration. The effect of different variables on the extraction efficiency of cobalt such as pH of solution, ligand concentration and injection volume was investigated using orthogonal array design. At optimum conditions, the calibration curve was linear over the range of 10–1000 μg/L. The detection limit, relative standard deviation and enrichment factor were 3 μg/L, 3.9% (n = 10) and 120, respectively. The developed method was successfully applied to the determination of cobalt in water and drug samples.     

Synthesis and characterization of new derivatives of bis(1,4-diazepinium) salts and bis(γ-substituted pentamethine cyanine(dyes using vinamidinium salt

The preparation of several bis(1,4-diazepinium) salts from the reaction of three 1,2-diamines with a bis(vinamidinium) salt is described. Bis(γ-substituted pentamethine cyanine(dyes are also prepared from the reaction of vinamidinium salt with 1,2-dimethylquinolinium perchlorate and 1,2,3,3-tetramethyl-3H-indolium perchlorate. Data from elemental analyzes, IR, ¹H-NMR, ¹³C-NMR, and mass spectra (MS) confirm the molecular structure of the obtained products.     

Enzyme-assisted extraction and ionic liquid-based dispersive liquid–liquid microextraction followed by high-performance liquid chromatography for determination of patulin in apple juice and method optimization using central composite design

A simple and highly sensitive analytical methodology for isolation and determination of patulin in apple-juice samples, based on enzyme-assisted extraction (EAE) and ionic liquid-based dispersive liquid–liquid microextraction (IL-DLLME) was developed and optimized. Enzymes play essential roles in eliminating interference and increasing the extraction efficiency of patulin. Apple-juice samples were treated with pectinase and amylase. A mixture of 80 μL ionic liquid and 600 μL methanol (disperser solvent) was used for the IL-DLLME process. The sedimented phase was analyzed by high-performance liquid chromatography (HPLC). Experimental parameters controlling the performance of DLLME, were optimized using response surface methodology (RSM) based on central composite design (CCD). Under optimum conditions, the calibration curves showed high levels of linearity (R² > 0.99) for patulin in the range of 1–200 ng g⁻¹. The relative standard deviation (RSD) for the seven analyses was 7.5%. The limits of detection (LOD) and limits of quantification (LOQ) were 0.15 ng g⁻¹ and 0.5 ng g⁻¹, respectively. The merit figures, compared with other methods, showed that new proposed method is an accurate, precise and reliable sample-pretreatment method that substantially reduces sample matrix interference and gives very good enrichment factors and detection limits for investigation trace amount of patulin in apple-juice samples.     

Synthesis of novel 5-substituted isophthalates from vinamidinium salts

Novel 5-substituted isophthalates were synthesized from the reaction of 2-substituted 1,3-bis(dimethylamino)-trimethinium salts with 1,3-bis(alkoxycarbonyl)acetone derivatives in the presence of sodium methoxide in ethanol at reflux.     

Experimental examination of the cooling performance of a cylindrical microchannel heat sink with straight and sinusoidal fins and alumina nanofluid coolant

Journal of Thermal Analysis and Calorimetry - Miniaturization of the electronic devices and dissipation of the heat generated during the operations within such equipment are of the most important...     

Model development for deactivation of bisphenol-A adduct particles during crystallization under the influence of impurity

A deactivation mechanism was developed to present the influence of 4-tert-butylphenol as a sample impurity on the bisphenol-A (BPA) adduct particles during the crystallization process. 4-tert-butylphenol is an organic sample impurity generally present in the reaction mixture of the industrial production of BPA. Kinetic parameters of growth, nucleation, agglomeration, and deactivation were estimated using the technique of model fitting to experimental data. The population and mass balances were used to model the adductive crystallization of BPA.     

Synthesis of new metal-free 1,2,4,5,9,10,12,13-octaaza[16]annulene derivatives using the reaction of vinamidinium salts with thiocarbohydrazide

A new series of marcocyclic ligands, 1,2,4,5,9,10,12,13-octaaza[16]annulene derivatives were synthesized by using the condensation reaction of the correspondingly [2+2] 2-heteroaryl-substituted vinamidinium salts or phenyl vinamidinium salts and derivatives or halo-substituted vinamidinum salt [1A-10A] with thiocarbohydrazide in ethanolic medium under mild condition. Metal complexes were formed by reacting of ethanolic solution of Co, Ni, and Zn with macrocyclic ligand in ethanolic medium under mild condition. Purposed complexes have been characterized with the help of elemental analyses, comparative absorption band of ν(C=N), mass, and NMR. Geometry and complex formulation are out of scope of this work. The biological activities of carohydrazide and thiocarbohydrazide base of the ligands and purposed complexes such as antimicrobial, antitumor, and insecticides have attracted significant attention in bioorganic chemistry.     

Improving the Electrical and Optical Properties of C40 Fullerene Using the Donor–Acceptor Groups

Journal of Cluster Science - In the present study, the C40 fullerene was selected as the source of the π electrons and the electron-donor–acceptor groups was used to improve the optical...