硫化态K－MoO_3／γ－Al_2O_3催化剂表面物种的XPS研究

采用Ｘ光光电子能谱（ＸＰＳ）及曲线拟合手段对硫化态Ｋ－ＭｏＯ_３／Ａｌ_２Ｏ_３合成醇催化剂进行了研究，分别考察负载量及硫化前不同条件预处理对催化剂表面的Ｓ、Ｍｏ组分的物种形式及各物种相对含量的影响，以及表面不同组分的相对组成。结果表明，根据其电子结合能变化，Ｓ组分可区分为ＳＯ_４￣（２－）、ＳＯ_３、Ｓ￣０、Ｓ_２￣（２－）、ＭｏＳ_２、ＭｏＳ_（２－ｘ）等六种存在形式不同的物种；Ｍｏ组分可区分为Ｍｏ￣（６＋）、Ｍｏ￣（５＋）、ＭｏＳ_（２＋ｘ）、ＭＯＳ_２、ＭＯＳ_（２－ｘ）等五种存在形式不同的物种。ＭｏＯ_３／Ａｌ_２Ｏ_３．重量比为０．０３的样品，Ｍｏ组分硫化还原不完全，表面Ｓ、Ｍｏ组分均以多种物种形式并存，ＭｏＯ_３／Ａｌ_２Ｏ_３比增加至０．０８和０．２４后，表面Ｓ、Ｍｏ组分中ＭＯＳ_２物种形式所占比例有所增加，样品的硫化还原也较彻底，但负载量增加至ＭｏＯ_３／Ａｌ_２Ｏ_３比为０．３５后，表面存在较多的Ｓ￣（６＋）物种和Ｍｏ￣（６＋）、Ｍｏ（５＋）物种，同时Ｋ组分在表面富集。对ＭｏＯ_３／Ａｌ_２Ｏ_３比为０．２４，样品硫化前不同条件预处理的研究表明，该样品与水蒸汽接触对其表面结构影响很大，与水蒸汽接触后再硫化，其表     

Ni(110)上氯和氧共吸附表面的结构和性质

用XPS,UPS,AES和功函数测定等方法考察了氯和氧在Ni(110)上的共吸附。氯强烈阻碍了氧的接续吸附;相反,氯接续吸附的速度和吸附量却因氯能驱使预吸附的氧溶入体相而没有明显影响。角分辨XPS分析为这一共吸附模型提供了进一步的证据。共吸附表面上氯和氧的热脱附和两者单独在Ni(110)表面上热脱附过程相似,但两者的脱附温度都有明显的降低。对共吸附和热脱附的机理进行了详细的讨论。     

Structure and properties of Ni(110) surface coadsorbing chlorine and oxygen

The coadsorption of chlorine with oxygen on Ni(110) surface has been investigated by XPS, UPS, AES and work function measurements. The chlorine preadsorption drastically inhibits the further uptake of oxygen. On the contrary, precovered oxygen has hardly any influence on the additional adsorption of chlorine due to the incorporation of precovered oxygen into the subsurface driven by the chlorine coadsorption. ARXPS measurements provide the evidence for this coadsorption model. The thermal desorption of chlorine and oxygen from the coadsorption surface is very similar to that of both individual adsorbates under the same heating conditions, but the desorption temperature of both the adsorbates apparently decreases on the coadsorption surface. The coadsorption and thermodesorption mechanisms are also discussed in detail.