若干杂环模型化合物的热氧化稳定性

<正> 自五十年代以来,耐热的杂环高分子取得了很多进展。曾报道聚酰亚胺、聚苯并咪唑、聚苯并噻唑、聚苯并噁唑、聚喹噁林及聚苯并噁嗪酮等都是性能较好的耐热高分子,而有些在工业上已得到应用。我们在进行芳杂环二腈聚合的工作中,曾将上述杂环结构引入二腈,以期获得性能优良的耐热高分子,所得结果已陆续报道。     

THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES

This review is a concise survey about the works in our laboratory on the polymerization of aromatic and heterocyclic dinitriles, including the polymerization kinetics and mechanism, synthesis of heterocyclic dinitriles, the structure of polymers, and the correlation between the structures of dinitriles and polymerization rates and thermal performances of Polymers.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅦ. THE POLYMERIZATION KINETICS OF CYANOPYRIDINES AND CHARACTERIZATION OF THE FORMED POLYMER*

The polymerization rates of three cyanopyridines catalyzed by cuprous chloride-zinc system are measured, and the structure of the formed polymer is also determined. Compared with aromatic nitrile, cyanopyridines polymerize faster and form polyconjugated polymer with skeleton—(C=N)—_n instead of triazine structure. This chain-polymer possesses semiconductive property, and can be converted into conductive material by thermal treatment. In addition, the polymerization kinetics of 3-cyanopyridine catalyzed by 3-cyanopyridinium perchlorate is investigated. It is found that the polymerization rate is directly proportional to the concentrations of monomer and catalyst, and the activation energy of the polymerization is 103.1 KJ/mol.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅪⅤ. STUDY ON THE CATALYSTS OF THE POLYMERIZATION OF AROMATIC NITRILES*

Various catalysts for the polymerization ot aromatic nitriles were investigated. It was found that Lewis acid-metal is a preferable catalyst system for the polymerization of aromatic nitriles, and the polymerization rate is about 10 times faster than Lewis acid alone. The polymerization rate of benzonitrile catalyzed by Lewis acid and different metals was measured, and the activity of metals was in the following decreasing order ,magnesium, zinc, sodium, calcium. Furthermore, the polymerization of benzonitrile catalyzed by different Lewis acid and zinc was also investigated.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

用红外光谱法对热固性酚醛树脂固化过程的研究

用红外光谱法研究了四种热固性酚醛树脂在固化过程中的化学变化。结果表明热固性酚醛树脂的固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要的。热固性酚醛树脂在进一步固化时(150—200°)出现了羰基,它的出现不是亚甲基氧化所致,而是部分醚键断裂形成了醛羰基。对热固性酚醛树脂的固化过程的机理进行了讨论。     

芳杂环二腈及其聚合物——Ⅹ.含苯并呋喃、苯并噻吩及喹啉环的二腈的合成及聚合

<正> 我们曾报道含不同苯并杂环二腈的合成、聚合及所得聚合物的热氧化稳定性。在这些二腈中与苯环相并的杂环皆含有二个杂原子。为了进一步阐明二腈的结构与聚合速度及所得聚合物热氧化稳定性的关系,本文合成了仅含一个杂原子与苯环相并的杂环化合物,即苯并呋喃、苯并噻吩及喹啉环的二腈(Ⅰ—Ⅲ)。     

芳杂环二腈及其聚合物——Ⅸ.4,4’-联苯二甲腈聚合动力学

本文研究了4,4′-联苯二甲腈在4,4′-联苯二甲腈氯化锌配合物催化下的聚合反应动力学,氰基浓度通过以铁氰化钾为内标的石腊糊法的红外光谱定量分析法测定。结果表明:该聚合反应是二级反应,聚合反应速度和氰基浓度及配合物浓度各成一次方比例。聚合反应表观活化能为12.4千卡/克分子。此外,也研究了不同的4,4′-联苯二甲腈金属氯化物配合物为催化剂对4,4′-联苯二甲腈聚合反应速度的影响,并对聚合反应机理进行了讨论。     

锰催化的C?C键生成反应研究进展

迄今为止,贵金属(铑、钯、钌等)在过渡金属催化的碳碳键生成反应中发挥着主导作用,然而使用廉价金属催化剂更符合可持续发展的要求。锰是地壳中含量排第三位的过渡金属,价格便宜,环境危害性小,有潜力成为贵金属催化剂的替代品并发挥其自身独特的反应性。尽管锰参与的当量反应有大量文献报道,目前锰催化的反应尤其是碳碳键生成反应的发展还不成熟,如何实现高效的催化循环是锰催化领域面临的主要难题之一。本文对锰催化的付-克烷基化反应、格氏试剂的酰化反应、偶联反应、碳金属化反应、自由基反应和碳氢键活化反应进行了综述。     

Phase-field simulation of dendritic growth in a binary alloy with thermodynamics data

This paper simulates the dendrite growth process during non-isothermal solidification in the Al-Cu binary alloy by using the phase-field model. The heat transfer equation is solved simultaneously. The thermodynamic and kinetic parameters are directly obtained from existing database by using the Calculation of Phase Diagram （CALPHAD） method. The effects of the latent heat and undercooling on the dendrite growth, solute and temperature profile during the solidification of binary alloy are investigated. The results indicate that the dendrite growing morphologies could be simulated realistically by linking the phase-field method to CALPHAD. The secondary arms of solidification dendritic are better developed with the increase of undercooling. Correspondingly, the tip speed and the solute segregation in solid-liquid interface increase, but the tip radius decreases.