基于耦合声场建模的膨胀腔消声器声学性能分析及试验

针对圆柱形膨胀腔消声器三维建模及声学性能分析问题, 提出一种基于切比雪夫变分原理的耦合声场建模方法, 建立三维圆柱形膨胀腔消声器理论模型并搭建试验台架, 传递损失试验结果验证了理论模型的准确性. 将膨胀腔消声器内部声场分解为多个子声场, 基于子声场间压力与质点振速连续性条件, 推导声场耦合变分公式, 构建子声场拉格朗日泛函. 将子声场声压函数展开为切比雪夫-傅里叶级数形式, 通过瑞利-里兹法求解膨胀腔消声器频率、声压响应及传递损失. 计算并对比分析扩张比、扩张腔长度、进出口管偏置对膨胀腔消声器消声性能的影响. 结果表明: 扩张比增大会有效提高消声器在低频段的消声性能, 进出口管的偏置对消声器消声性能影响很小.     

Design consideration and modelling studies of ultrasound and ultraviolet combined approach for shelf-life enhancement of pine apple juice

Although both ultraviolet (UV) radiation and ultrasound (US) treatment have their capabilities in microbial inactivation, applying any one method alone may require a high dose for complete inactivation, which may affect the sensory and nutritional properties of pineapple juice. Hence, this study was intended to analyse and optimise the effect of combined US and UV treatments on microbial inactivation without affecting the selected quality parameters of pineapple juice. US treatment (33 kHz) was done at three different time intervals, viz. 10 min, 20 min and 30 min., after which, juice samples were subjected to UV treatment for 10 min at three UV dosage levels, viz. 1 J/cm², 1.3 J/cm², and 1.6 J/cm². The samples were evaluated for total colour difference, pH, total soluble solids (TSS), titrable acidity (TA), and ascorbic acid content; total bacterial count and total yeast count; and the standardization of process parameters was done using Response Surface Methodology and Artificial Neural Network. The results showed that the individual, as well as combined treatments, did not significantly impact the physicochemical properties while retaining the quality characteristics. It was observed that combined treatment resulted in 5 log cycle reduction in bacterial and yeast populations while the individual treatment failed. From the optimization studies, it was found that combined US and UV treatments with 22.95 min and1.577 J/cm² ensured a microbiologically safe product while retaining organoleptic quality close to that of fresh juice.     

紫色球杆菌视紫红质光谱特性的机器学习研究

近年来，机器学习等人工智能技术被应用于蛋白质工程，其在蛋白质结构、功能预测、催化活性等研究中具有独特优势。在未知蛋白质结构的情况下，将蛋白质序列和功能特性与机器学习相结合，基于序列-活性关系（innovative sequence-activity relationship，ISAR）算法，将蛋白质氨基酸序列数字化，用快速傅里叶变换（fast four transform，FFT）进行预处理，再进行偏最小二乘回归建模，可在数据集较少情况下拟合得到最佳模型。通过机器学习对紫色球杆菌视紫红质（gloeobacter violaceus rhodopsin，GR）的突变体蛋白质氨基酸序列与光谱最大吸收波长进行建模，获得了最佳模型。用最佳索引LEVM760106建模得到的确定系数R² 为0.944，均方误差E为11.64。用小波变换进行的预处理，其R² 虽也约为0.944，但E大于11.64，不及FFT进行的预处理。方法较好地解决了蛋白质序列与功能特性之间的数学建模问题，在蛋白质工程中可为预测更优的突变体提供支持。     

Recent advances and challenges in the recovery and purification of cellular exosomes

Exosomes are nanovesicles secreted by most cellular types that carry important biochemical compounds throughout the body with different purposes, playing a preponderant role in cellular communication. Because of their structure, physicochemical properties and stability, recent studies are focusing in their use as nanocarriers for different therapeutic compounds for the treatment of different diseases ranging from cancer to Parkinson's disease. However, current bioseparation protocols and methodologies are selected based on the final exosome application or intended use and present both advantages and disadvantages when compared among them. In this context, this review aims to present the most important technologies available for exosome isolation while discussing their advantages and disadvantages and the possibilities of being combined with other strategies. This is critical since the development of novel exosome‐based therapeutic strategies will be constrained to the effectiveness and yield of the selected downstream purification methodologies for which a thorough understanding of the available technological resources is needed.     

一种非正交对称条带束流位置监测器设计

介绍了一种条带束流位置监测器(BPM)的设计与仿真方法。在国家同步辐射实验室"太赫兹近场高通量材料物性测试系统"工程项目中,针对波荡器出口处真空室非正交对称性的问题,设计了矩形真空室和跑道形真空室下的两种非正交对称性条带BPM,并与传统的圆形真空室下条带BPM进行对比。基于边界元法,利用MATLAB软件分别对三种真空室下的条带BPM进行建模和仿真。仿真结果表明:相对于传统的圆形真空室下条带BPM,矩形和跑道形真空室下条带BPM灵敏度提高了30%,阻抗匹配误差相对降低了20%,束流位置拟合误差降低了80%。考虑加工精度,矩形真空室下的条带BPM更适用于该工程。     

Generating Artificial Reverberation via Genetic Algorithms for Real-Time Applications

We introduce a Virtual Studio Technology (VST) 2 audio effect plugin that performs convolution reverb using synthetic Room Impulse Responses (RIRs) generated via a Genetic Algorithm (GA). The parameters of the plugin include some of those defined under the ISO 3382-1 standard (e.g., reverberation time, early decay time, and clarity), which are used to determine the fitness values of potential RIRs so that the user has some control over the shape of the resulting RIRs. In the GA, these RIRs are initially generated via a custom Gaussian noise method, and then evolve via truncation selection, random weighted average crossover, and mutation via Gaussian multiplication in order to produce RIRs that resemble real-world, recorded ones. Binaural Room Impulse Responses (BRIRs) can also be generated by assigning two different RIRs to the left and right stereo channels. With the proposed audio effect, new RIRs that represent virtual rooms, some of which may even be impossible to replicate in the physical world, can be generated and stored. Objective evaluation of the GA shows that contradictory combinations of parameter values will produce RIRs with low fitness. Additionally, through subjective evaluation, it was determined that RIRs generated by the GA were still perceptually distinguishable from similar real-world RIRs, but the perceptual differences were reduced when longer execution times were used for generating the RIRs or the unprocessed audio signals were comprised of only speech.     

贝叶斯优化卷积神经网络公共场所异常声识别*

针对公共场所异常声的感知和识别问题,提出一种基于贝叶斯优化卷积神经网络的识别方法。提取声信号的Gammatone倒谱系数、倍频程功率谱、短时能量和谱质心,组合成声信号的特征图。构建卷积神经网络作为分类器,利用递增的卷积核设置和池化操作处理不同尺度的特征。基于贝叶斯优化算法优化卷积神经网络的模型参数,对包括火苗噼啪声、婴儿啼哭声、烟花燃放声、玻璃破碎声和警报声的5种公共场所异常声进行识别。该方法的识别结果与基于不同的特征提取和分类器方案得到的识别结果进行比较,结果表明该方法的识别效果优于其他特征提取和分类器方案的识别效果。最后分析了该方法在不同信噪比噪声干扰下的识别结果,验证了该方法的有效性。     

基于图像处理的光学谐振腔自准直研究方法

针对我国氧碘化学激光器输出能量不断提高的情况下,主要限制光束质量的因素之一是出光过程中的光腔失调,提出了一种基于图像处理的光学谐振腔自准直研究方法。该研究方法利用氦氖穿腔光通过凹腔镜中心孔,并在凸腔镜后方放置工业相机,在屏幕上方形成一个干涉同心圆环。通过借助OpenCV库中二值化、霍夫圆检测等图像处理的方法,获得干涉同心圆环的圆心坐标,再通过以圆心为中心将图像分成上下左右四个部分,通过判断这四部分亮点像素的数量差值来预估干涉同心圆环的偏移状态,进而获得空腔条件下光学谐振腔发生变化的理论判据。实验结果表明,该方法可以获得相当精准的光学谐振腔失调判据,其失调判据选取左右亮点像素差值30000,上下亮点像素差值45000,为今后失调判据与步进电机自动调腔的结合做好充足的准备。     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

Dual‐signal amplification strategy for ultrasensitive chemiluminescence detection of PDGF–BB in capillary electrophoresis

Many efforts have been made toward the achievement of high sensitivity in capillary electrophoresis coupled with chemiluminescence detection (CE‐CL). This work describes a novel dual‐signal amplification strategy for highly specific and ultrasensitive CL detection of human platelet‐derived growth factor–BB (PDGF–BB) using both aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (HRP–AuNPs–aptamer) as nanoprobes in CE. Both AuNPs and HRP in the nanoprobes could amplify the CL signals in the luminol–H₂O₂ CL system, owing to the excellent catalytic behavior of AuNPs and HRP in the CL system. Meanwhile, the high affinity of aptamer modified on the AuNPs allows detection with high specificity. As proof‐of‐concept, the proposed method was employed to quantify the concentration of PDGF–BB from 0.50 to 250 fm with a detection limit of 0.21 fm. The applicability of the assay was further demonstrated in the analysis of PDGF–BB in human serum samples with acceptable accuracy and reliability. The result of this study exhibits distinct advantages, such as high sensitivity, good specificity, simplicity, and very small sample consumption. The good performances of the proposed strategy provide a powerful avenue for ultrasensitive detection of rare proteins in biological sample, showing great promise in biochemical analysis. Copyright © 2015 John Wiley & Sons, Ltd.