单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

Stochastic sensitivity analysis of coupled acoustic-structural systems under non-stationary random excitations

This paper presents a new sensitivity analysis method for coupled acoustic–structural systems subjected to non-stationary random excitations. The integral of the response power spectrum density (PSD) of the coupled system is taken as the objective function. The thickness of each structural element is used as a design variable. A time-domain algorithm integrating the pseudo excitation method (PEM), direct differentiation method (DDM) and high precision direct (HPD) integration method is proposed for the sensitivity analysis of the objective function with respect to design variables. Firstly, the PEM is adopted to transform the sensitivity analysis under non-stationary random excitations into the sensitivity analysis under pseudo transient excitations. Then, the sensitivity analysis equation of the coupled system under pseudo transient excitations is derived based on the DDM. Moreover, the HPD integration method is used to efficiently solve the sensitivity analysis equation under pseudo transient excitations in a reduced-order modal space. Numerical examples are presented to demonstrate the validity of the proposed method.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

相位可控的核四极矩共振激励脉冲发生器设计

在核四极矩共振（NQR）领域，射频激励脉冲信号的优劣对NQR响应信号有重要影响.针对常规方法中射频激励脉冲参数不可控的问题，本文基于32位闪存微型控制器STM32和直接数字频率合成（DDS）芯片AD9910设计了一种相位可控激励脉冲发生器.采用STM32控制AD9910产生波形参数（脉冲宽度、脉冲间隔、脉冲个数和共振频率等）可控的射频激励脉冲，利用LabVIEW软件平台设计脉冲参数设置界面，并建立计算机与微控制器通信，实现波形参数的精确优化控制.实验结果表明，该方法实现了相位可控的NQR激励脉冲序列，可为后续NQR信号检测提供有效激励源.     

Aharonov–Bohm effect for bound states on spin-0 massive charged particles in a Gödel-type space–time with Coulomb potential

In this paper, we investigate the relativistic quantum dynamics of spin-0 massive charged particles in a Gödel-type space–time with electromagnetic interactions. We derive the radial wave equation of the Klein–Gordon equation with an internal magnetic flux field and Coulomb-type potential in the Som–Raychaudhuri space–time with cosmic string. We solve this equation and analyze the analog effect in relation to the Aharonov–Bohm effect for bound states.     

光电导天线太赫兹辐射峰值调控研究

针对微结构光电导天线与飞秒激光之间相互作用效应以及辐射太赫兹波调控问题进行了研究。采用德鲁德-洛伦兹理论模型获得微结构光电导天线辐射光电流密度,通过时域有限差分把光电流密度迭代在激励网格上,结合麦克斯韦方程求解时变电磁场,并通过传输线格林函数获得多层介质近场到远场的辐射太赫兹波,建立了辐射光电流与辐射阻抗、电磁共振模式之间的关系模型,模拟仿真分析了微结构S型光电导天线太赫兹波辐射调控机理。研究结果表明:微结构改变了天线等效模型的辐射阻抗;同时得知耦合系数不为零时存在耦合作用,且随着耦合系数增大共振频率峰值发生辐射增强和位移;并通过设计S型光电导天线获得辐射峰值频率调整范围为0.50~0.80 THz之间,对比工形天线辐射峰值频率由原来的0.40 T移动到0.76 T,频率调整度75%,峰值辐射效率约提高70%。该研究工作为后续高功率光导天线太赫兹波辐射的共振中心频点以及结构设计奠定重要基础。     

利用电磁法研究HMX与TATB混合钝感炸药的冲击起爆特性

为研究含有少量奥克托金(HMX)且以三氨基三硝基苯(TATB)为基的高能钝感炸药PBX-3的冲击起爆反应增长规律,采用火炮驱动蓝宝石飞片的方法和铝基组合式电磁粒子速度计技术进行了一维平面冲击实验。通过实验测量撞击表面及内部不同深度处的冲击波后粒子速度,得到PBX-3炸药的Hugoniot关系。根据冲击波示踪器所测数据绘制了炸药到爆轰的时间-距离(x-t)图,获得了反映炸药冲击起爆性能的Pop关系。将入射压力为12.964 GPa时达到爆轰的6条速度曲线修整成相同零点,通过读取6条曲线的分离点即反应区末端的C-J点,计算出化学反应区时间和宽度。     

Photoluminescence of green nanophosphors Sr2MgSi2O7 doped with Tb3+ under 374-nm excitation

A series of Sr₂MgSi₂O₇:Tb³⁺ nanophosphors is prepared using a high-temperature solid-state reaction. The x-ray diffraction patterns show that the crystal structure of the sample is not significantly affected by Tb³⁺ ions. However, the images of the scanning electron microscope illustrate that the average size of nanoparticles becomes larger with the increase of Tb³⁺ concentration. Unlike earlier investigations on down-conversion emission of Tb³⁺ ion excited by deep ultraviolet light, in this work, the photoluminescence characteristics of Sr₂MgSi₂O₇ nanophosphors doped with different Tb³⁺ concentrations are analyzed under 374-nm excitations. The intense green emission at 545 nm is observed at an optimal doping concentration of 1.6 mol%. The main reason for the concentration quenching is due to the electric dipole-electric dipole interaction among Tb³⁺ ions.     

Measurement of the surface excitation parameter of Kapton,polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE)

Reflection electron energy loss spectra (REELS) were measured for five insulating organic compounds: Kapton, polyethylene (PE), poly(methyl methacrylate) (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE), as well as for Ni and Si, in the energy range between 200 and 1600 eV. The average number of surface excitations for a single surface crossing were determined from the experimental data and were found to be considerably smaller than for earlier studied materials, which mainly consisted of elemental metals [Surf. Sci. 486(2001)L461]. The surface excitation parameter, a material parameter used to quantify the relative intensity of surface losses in (photo)electron spectroscopy, was extracted from the data and compared with values found in the literature. The results indicate that surface excitations only have a minor influence on quantification of XPS spectra of polymers. On the other hand, a correction for surface excitations turns out to be essential for measurements of the electron inelastic mean free path of polymers when a metal is used as reference material.