An improved depth-averaged nonhydrostatic shallow water model with quadratic pressure approximation

Phase-resolved information is necessary for many coastal wave problems, for example, for the wave conditions in the vicinity of harbor structures. Two-dimensional (2D) depth-averaging shallow water models are commonly used to obtain a phase-resolved solution near the coast. These models are in general more computationally effective compared with computational fluid dynamics software and will be even more capable if equipped with a parallelized code. In the current article, a 2D wave model solving the depth-averaged continuity equation and the Euler equations is implemented in the open-source hydrodynamic code REEF3D. The model is based on a nonhydrostatic extension and a quadratic vertical pressure profile assumption, which provides a better approximation of the frequency dispersion. It is the first model of its kind to employ high-order discretization schemes and to be fully parallelized following the domain decomposition strategy. Wave generation and absorption are achieved with a relaxation method. The simulations of nonlinear long wave propagations and transformations over nonconstant bathymetries are presented. The results are compared with benchmark wave propagation cases. A large-scale wave propagation simulation over realistic irregular topography is shown to demonstrate the model's capability of solving operational large-scale problems.     

梯级溃坝洪水洪峰增强机制

我国在多条河流上修建了大量梯级水库, 梯级坝溃决诱发洪水大大超过单坝溃决洪水洪峰, 因此亟需加深对梯级坝溃决洪水洪峰增强机制的认识. 本文建立了梯级坝溃决洪水演进过程的一维浅水动力学模型, 发展了一套能捕捉激波、干湿边界和保平衡结构的数值求解方法, 通过大量算例, 系统研究了梯级坝溃决洪水演进过程的质量转化和能量转化机制. 研究结果表明, 梯级溃决中, 上游溃决诱发的洪水大大增大下游水库的质量和动量, 形成一个带动量的水塔, 同时在尾部残留一个动量较大的射流, 不断补充下游坝体溃决后水塔的质量和动量, 持续维持洪峰高度. 根据该射流-水塔机制, 建立了梯级坝溃决洪水演进过程对应的射流-水塔单坝溃决洪水过程等效模型, 该等效模型基本反映了梯级坝溃决诱发洪水的洪峰过程, 并成功预测了多个坝间距为百公里量级的梯级坝溃决洪水洪峰高程和流量, 可望为流域防洪和梯级坝设计提供理论依据.      

A simple three‐wave approximate Riemann solver for the Saint‐Venant‐Exner equations

Erosion and sediments transport processes have a great impact on industrial structures and on water quality. Despite its limitations, the Saint‐Venant‐Exner system is still (and for sure for some years) widely used in industrial codes to model the bedload sediment transport. In practice, its numerical resolution is mostly handled by a splitting technique that allows a weak coupling between hydraulic and morphodynamic distinct softwares but may suffer from important stability issues. In recent works, many authors proposed alternative methods based on a strong coupling that cure this problem but are not so trivial to implement in an industrial context. In this work, we then pursue 2 objectives. First, we propose a very simple scheme based on an approximate Riemann solver, respecting the strong coupling framework, and we demonstrate its stability and accuracy through a number of numerical test cases. However, second, we reinterpret our scheme as a splitting technique and we extend the purpose to propose what should be the minimal coupling that ensures the stability of the global numerical process in industrial codes, at least, when dealing with collocated finite volume method. The resulting splitting method is, up to our knowledge, the only one for which stability properties are fully demonstrated.     

An identification method to estimate surface shortwave fluxes on temperature and thickness observations of sea ice in CHINARE 2006

In this paper, a parameter identification method to determine surface shortwave fluxes using temperature and thickness measurements of sea ice in CHINARE 2006 is presented. Adopting a new standard for the calculation of the thermodynamic properties of seawater named TEOS‐10, the surface shortwave fluxes are calculated by the temperature and thickness observations that were measured at Nella Fjord around Zhongshan Station, Antarctica. New simulations for temperature profiles in a different measurement period are performed by three parameterization schemes including the present method, Zillman and Shine. All numerical results are compared with in situ measurements. Results show that better simulations of the surface shortwave radiations and temperature distributions are possible with the identification method than Zillman and Shine. Therefore this method is valid, and the obtained shortwave radiation function can be applied in sea ice modeling. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel marine-based gold nanocatalyst in solvent-free synthesis of polyhydroquinoline derivatives: Green and sustainable protocol

We report an ecofriendly synthetic approach for the fabrication of biogenic gold nanoparticles (AuNPs) using electron-rich sea cucumber extract as a bio-reductant and stabilizing agent in reducing gold cations into AuNPs at the optimal conditions. The produced AuNPs are spherical in shape with an average particle size of 11 ± 1.5 nm in transmission electron microscopy (TEM) and exhibited a crystal structure of face-centered cubic in X-ray diffraction (XRD) analyses. Our results indicated that bioinspired AuNPs demonstrate superior catalytic activity in the safe and facile one-pot synthesis of polyhydroquinoline derivatives under solvent-free reaction conditions. This green route encompasses multiple benefits including highly recyclable bioinspired catalyst (5 cycles), short reaction times, convenient workout, high to excellent product yields (82%–97%), and nonhazardous conditions.     

Sphaerococcus coronopifolius (Rhodophyta,Gigartinales): a Mediterranean red alga with potential and applications in restoration

Abstract

Experimental studies conducted on some species of Mediterranean red algae allowed to identify Sphaerococcus coronopifolius Stackhouse as a valid alternative to the Pacific alga Gloiopeltis furcata (Postels & Ruprecht) J. Agardh, for the extraction of a material usable as natural consolidant and adhesive in the field of restoration. Promising results have been observed by comparing the extracts obtained from these two algae after the same extraction procedure. Chemical analysis (FTIR) revealed that S. coronopifolius has qualities similar to G. furcata. Even more promising results for S. coronopifolius compared to G. furcata were observed after the analysis of pH and conductivity, and the adhesion tests carried out on both extracts.     

An improved algorithm for the shallow water equations model reduction: Dynamic Mode Decomposition vs POD

We propose an improved framework for dynamic mode decomposition (DMD) of 2‐D flows for problems originating from meteorology when a large time step acts like a filter in obtaining the significant Koopman modes, therefore, the classic DMD method is not effective. This study is motivated by the need to further clarify the connection between Koopman modes and proper orthogonal decomposition (POD) dynamic modes. We apply DMD and POD to derive reduced order models (ROM) of the shallow water equations. Key innovations for the DMD‐based ROM introduced in this paper are the use of the Moore–Penrose pseudoinverse in the DMD computation that produced an accurate result and a novel selection method for the DMD modes and associated amplitudes and Ritz values. A quantitative comparison of the spatial modes computed from the two decompositions is performed, and a rigorous error analysis for the ROM models obtained is presented. Copyright © 2015 John Wiley & Sons, Ltd.     

The global weak solution for the shallow water wave model of moderate amplitude

In this paper, we firstly establish the existence theorem of the global weak solutions of the Cauchy problem for the shallow water wave model of moderate amplitude, then following the idea in Xin and Zhang’s work (see Xin and Zhang, 2002), we prove the uniqueness of global weak solutions using the localization analysis in the transport equation theory. Finally, several travelling wave solutions are derived.     

考虑底部隆起的浅埋隧道围岩压力计算分析

针对浅埋隧道开挖后底部隆起变形现象,应用极限分析上限法构造了考虑底部隆起变形的围岩压力计算模型,结合线性Mohr-Coulomb准则等推导出极限围岩压力的理论表达式。通过约束条件将围岩压力的计算转化为数学中的最优化问题,编制程序进行了优化计算。将计算结果与工程实测数据及文献计算结果进行了对比,验证了当前方法的可靠性。同时,指出在运用极限分析法处理浅埋隧道围岩压力问题过程中应将隧道底部一同考虑,对隧道底部支护会对整个围岩压力产生影响,有助于隧道结构的整体稳定。研究可以为浅埋隧道的开挖、支护提供一定的理论指导.     

A simple synthesis of natural spinazarins and their analogues

A short simple synthesis of spinazarins (2,3-dihydroxy-naphthazarins or 2,3,5,8-tetrahydroxy-1,4-naphtho-quinones) from available 2,3-dichloronaphthazarin derivatives involves replacement of chlorine atoms with azido groups followed by their acidic hydrolysis. The procedure can be used for the preparative synthesis of natural biologically active spinazarins and their analogues.