Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

Probing the early stages of thermal fractionation by successive self‐nucleation and annealing performed with fast scanning chip‐calorimetry

The thermal fractionation kinetics of a linear low‐density polyethylene (LLDPE) during Successive Self‐Nucleation and Annealing (SSA) is investigated by fast scanning chip‐calorimetry (FSC), by systematically varying the holding times (t_s) at each fractionation temperature (T_s). The range of explored fractionation times spans four orders of magnitude, from 0.001 to 10 s. Discernible thermal fractions are already detected in the very early stages of the process, at t_s shorter than one second. As t_s increases, the melting endotherm after SSA indicates a progressive lamellar thickening and narrowing of the thicknesses distribution of the various crystalline fractions. The largest variations are observed for the families of crystals containing the longest crystallizable sequences, which also undergo a change of their relative content as a consequence of self‐nucleated crystallization at T_s. The quality of the thermal fractionation obtained in 10 seconds with FSC is equivalent to that of conventional differential scanning calorimetry SSA (t_s = 300 s). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2200–2209     

Temperature‐dependent phase‐segregation behavior and antifouling performance of UV‐curable methacrylated PDMS/PEG coatings

Controllable phase segregation adjustment for immiscible polymer blends has always been tough, which hinders the development of amphiphilic antifouling coatings from more accessible blends. Herein, methacrylated poly(dimethylsiloxane) (PDMS‐MA) was synthesized and mixed with poly(ethylene glycol)methylether methacrylate (PEG‐MA). It was interestingly discovered that these PDMS‐MA/PEG‐MA blends displayed upper critical solution temperatures (UCST) due to thermo‐induced conformational change of PEG‐MA and the UCST changed with PDMS‐MA/PEG‐MA mass ratios. Micro‐/nano‐phase segregation, nanophase segregation, or homogenous morphology were therefore achieved. These PDMS‐MA/PEG‐MA blends with different mass ratios were UV‐cured under varying temperatures to fabricate coatings. Their surface morphology and wettability are readily adjusted by phase segregation. For the first time, highly hydrophilic surface was achieved for coatings with microphase segregation because of the exposure of PEG‐rich domains, which exhibited an enhanced protein resistance against bovine serum albumin (BSA). Anti‐bacterial performance (Shewanella loihica) was also observed for these PDMS/PEG coatings. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1612–1623     

Surface composition of PdCuAu ternary alloys: a combined LEIS and XPS study

PdCuAu ternary alloy samples with different composition were synthesized on top of ZrO₂‐modified porous stainless steel disks by the sequential electroless deposition technique. The structure, morphology and bulk composition of the samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy and energy dispersive X‐ray spectroscopy (EDX). Complete alloy formation with a pure fcc phase for the Pd₇₁Cu₂₆Au₃, Pd₇₀Cu₂₅Au₅ and Pd₆₇Cu₂₄Au₉ samples and a bcc structure for the Pd₆₂Cu₃₆Au₂ and Pd₆₀Cu₃₇Au₃ samples were obtained upon annealing at 500 °C for 120 h as revealed by XRD. A combination of low‐energy ion scattering (LEIS) and X‐ray photoelectron spectroscopy (XPS) was used to investigate the surface properties of the PdCuAu alloys. XPS results confirmed alloy formation under the annealing conditions. XPS analysis also revealed that the near‐surface regions of the alloys became enriched in Pd with respect to the bulk composition determined by EDX. In contrast, LEIS and angle‐resolved XPS analyses showed that the top‐most surface layers in all samples were copper‐rich compared with the bulk composition. This high Cu surface concentration could impart resistance to bulk sulfide formation to the PdCuAu alloy membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Solutions of the kinetic theory for bounded collisional granular flows

We consider collisional granular flows of nearly elastic spheres featuring a single constituent or binary mixtures in various bounded geometries. We review the equations of the kinetic theory for the conservation of mass, momentum, fluctuation energy and species concentration. We illustrate their solutions for shear flows in rectilinear or axisymmetric rectangular channels with or without a body force. We show that proper boundary conditions yield numerical solutions in good agreement with molecular dynamical simulations and with data from physical experiments carried out in microgravity.Received: 3 December 2002, Accepted: 3 February 2003, Published online: 27 June 2003PACS: 45.70.Mg, 45.70.-n, 05.20.Dd, 83.10.Rs     

One-dimensional migration of interstitial clusters in SUS316L and its model alloys at elevated temperatures

For self-interstitial atom (SIA) clusters in various concentrated alloys, one-dimensional (1D) migration is induced by electron irradiation around 300 K. But at elevated temperatures, the 1D migration frequency decreases to less than one-tenth of that around 300 K in iron-based bcc alloys. In this study, we examined mechanisms of 1D migration at elevated temperatures using in situ observation of SUS316L and its model alloys with high-voltage electron microscopy. First, for elevated temperatures, we examined the effects of annealing and short-term electron irradiation of SIA clusters on their subsequent 1D migration. In annealed SUS316L, 1D migration was suppressed and then recovered by prolonged irradiation at 300 K. In high-purity model alloy Fe-18Cr-13Ni, annealing or irradiation had no effect. Addition of carbon or oxygen to the model alloy suppressed 1D migration after annealing. Manganese and silicon did not suppress 1D migration after annealing but after short-term electron irradiation. The suppression was attributable to the pinning of SIA clusters by segregated solute elements, and the recovery was to the dissolution of the segregation by interatomic mixing under electron irradiation. Next, we examined 1D migration of SIA clusters in SUS316L under continuous electron irradiation at elevated temperatures. The 1D migration frequency at 673 K was proportional to the irradiation intensity. It was as high as half of that at 300 K. We proposed that 1D migration is controlled by the competition of two effects: induction of 1D migration by interatomic mixing and suppression by solute segregation.     

振动颗粒混合物中的周期性分聚现象与能量耗散

在垂直振动的激励下, 铜和玻璃珠组成的二元颗粒混合样品存在依次出现分界清晰的三明治, 巴西果, 反巴西果三种分聚结构的周期循环变化现象, 其中出现三明治结构的时段最长(大于90%). 循环周期随振动台频率的增加而增大, 随加速度的增加而减小. 对三种分聚结构的样品能量耗散功率的测量显示, 在相同的振动条件下反巴西果结构的能耗功率最大, 巴西果结构的最小. 利用Hong的凝聚和渗透两机理相互竞争的观点, 并结合能耗功率的测量结果, 可定性解释这个周期性分聚现象.     

Directional Self‐Assembly of Fluorinated Star Block Polymer Thin Films Using Mixed Solvent Vapor Annealing

We demonstrate the directional alignment of perpendicular‐lamellae domains in fluorinated three‐armed star block polymer (BP) thin films using solvent vapor annealing with shear stress. The control of orientation and alignment was accomplished without any substrate surface modification. Additionally, three‐armed star poly(methyl methacrylate‐block‐styrene) [PMMA‐PS] and poly(octafluoropentyl methacrylate‐block‐styrene) were compared to their linear analogues to examine the impact of fluorine content and star architecture on self‐assembled BP feature sizes and interdomain density profiles. X‐ray reflectometry results indicated that the star BP molecular architecture increased the effective polymer segregation strength and could possibly facilitate reduced polymer domain spacings, which are useful in next‐generation nanolithographic applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1663–1672     

Criss‐cross amphiphilic polymers and analogous model systems

A new class of amphiphilic polymers carrying two pendant docosyl (C22) chains, located at periodic intervals that are separated by PEG chains of varying lengths, was synthesized via a simple melt‐transesterification polymerization, using dimethyl, 2,5‐didocosyloxyterephthalate as one of the monomers. DSC, variable temperature FT‐IR, and WAXS studies demonstrated that immiscibility between the pendant docosyl units and the backbone PEG segments drives their self‐segregation; this results in the crystallization of the pendant docosyl segments and the generation of a lamellar morphology with the alkyl segments and the PEG chains occupying alternate layers. Based on the study of model criss‐cross amphiphiles that resemble the polymer repeat unit, it is postulated that the chains reconfigure such that both the docosyl chains fold to one side of the terephthalate unit while the PEG segments form a loop on the other side; these chains then organize in a bilayer to form the lamellar structure. The simplicity of the synthesis and the rather unique properties of these polymers suggests that such a design could be translated to develop other interesting functional materials that could exploit the immiscibility‐driven microphase separation for the generation of sub‐10 nm domains; these could have potential applications, such as in membranes, solid polymer electrolyte formulations, and so forth. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1554–1563