Cytotoxicity of Shear Exfoliated Pnictogen (As,Sb, Bi) Nanosheets

The experimental achievement of phosphorene, which exhibits superior electronic, physical, and optical properties has spurred recent interest in other Group 15 elemental 2D nanomaterials such as arsenene, antimonene, and bismuthene. These unique and superior properties of the pnictogen nanosheets have spurred intensive research efforts and led to the discovery of their diversified potential applications; for instance, optical Kerr material, photonic devices, pnictogen-decorated microfibers, high-speed transistors, and flexible 2D electronics. Previous studies have mainly been dedicated to study the synthesis, properties, and applications of the heavy pnictogens nanosheets; however, the toxicological behaviour of these nanosheets has yet to be established. Herein, the cytotoxicity study of pnictogen nanosheets (As, Sb, and Bi) was conducted over 24 h of incubation with various concentrations of test materials and adenocarcinoma human lung epithelial A549 cells. After the treatment period, the remaining cell viabilities were obtained through absorbance measurements with WST-8 and MTT assays. These findings demonstrate that the toxicity of pnictogen nanosheets decreases down Group 15, whereby arsenic nanosheets are considered to be the most toxic, whereas bismuth nanosheets induce low cytotoxicity. The findings of this study constitute an important initial step towards enhancing our understanding of the toxicological effects of pnictogen nanosheets in light of their prospective commercial applications.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

应变对单层砷烯结构拉曼散射的影响

应用密度泛函理论对应变下的单层砷烯拉曼光谱的变化进行研究.由于材料的结构对称性较低，由外部应力诱发的形变不仅可以造成拉曼模式分裂，还可以引发拉曼模式偏移.计算表明：拉曼峰位的变化与应变正相关，建立了应变与峰位移动间的定量关系，为在实验中识别砷烯结构的应变提供依据.     

通过超宽139La固体核磁共振波谱研究层状La(OH)2NO3

层状稀土氢氧化物是一类新型的稀土功能材料，本文采用固体核磁共振（SSNMR）方法研究了同时具备离子交换能力和非线性光学特性的层状La（OH）₂NO₃化合物，探讨了通过四极核CPMG（QCPMG）脉冲序列和变频谱图采集获取超宽¹³⁹La SSNMR谱图的方法，并描述了适用于此类实验的滤波方程和谱图重建方法.重建谱图同时包含四极核中心跃迁和卫星跃迁信息，本文使用QUEST软件对超宽¹³⁹La NMR谱图进行了模拟，获取的四极耦合常数C_Q和非对称因子η_Q均与CASTEP密度泛函理论计算值高度吻合.SSNMR实验结果证实层状La（OH）₂NO₃化合物属于非中心对称结构（P2₁），解决了对其结构长期以来存在的争论.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Electronic and optical properties of quaternary selenides for optoelectronic applications: Insights from DFT+U-computations

The optical properties, electronic charge density, electronic structure of the new layered selenides materials, BaGdCuSe₃, CsUCuSe₃, CsZrCuSe₃, and CsGdZnSe₃ compounds have been calculated by using the full potential and linear augmented plane wave (FP-LAPW) methods as applied in the WIEN2k package, which is based on the density functional theory. The ALnMSe3 compound's structure of these was (A = Cs, Ba; Ln = Zr, Gd, U; M = Cu, Zn) is composed of (n = 1, 2) layers, which might be separated by A atoms. It is to be observed that there is strong hybridization between the s, p, and d states of Zr, Gd, and Cu atoms. Around the gadolinium atom, the charge density contours are completely circular, but the Gadolinium “Gd” atom shows an ionic nature. To calculate the refractive index, we used Kramer's Kronig correlations with the imaginary part dielectric function. The decrease in the refractive index is due to the lack of probability for direct excitation of the electrons, resulting in a loss of energy. The value of the static refractive index for all reference compounds is about 1.75–2.25, which is indication that the material used in optoelectronic devices.     

层状复合氢氧化物的有机改性方法及应用研究进展

层状复合氢氧化物(LDHs)因其化学组成可调、比表面积大、生物相容性好等特点,目前在环境、能源和生物医药等领域广受关注.然而, LDHs在合成过程中由于其分子内作用力易发生团聚而导致其在基体中的分散不均匀,极大地限制了LDHs在实际中的应用.有机改性是改善LDHs分散性的有效方法,从表面改性和插层改性两个方面综述了近年来LDHs的有机改性方法,并介绍了其在阻燃、吸附、催化、气体阻隔、发光、储能和生物医药材料等领域的应用.最后对改性后LDHs未来的研究方向和应用领域进行了展望.     

ZnCr双金属层状材料对废水中酸性红14的吸附性能

采用共沉淀法制备性能优异的层状材料锌铬水滑石(Zn_xCr-LDHs, x=2, 3, 4), 并探究各种因素对吸附酸性红14(AR14)的影响。XRD、ICP、FTIR及BET表征结果表明:合成的Zn_xCr-LDHs晶型良好且稳定, 具备介孔结构。实验结果表明:最佳吸附剂为Zn₃Cr-LDHs, 比表面积为101 m²·g^-1, 对AR14的最大吸附容量为484.63 mg·g^-1。同时, 降低溶液pH值和提高溶液温度均可促进AR14的吸附。该吸附过程分别符合准二级动力学模型和Freundlich等温吸附模型。结合Materials Studio 5.5软件模拟, 推测该吸附机理主要以表面吸附为主, -SO₃^-基团是反应点。