水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

三维贯穿大孔氧化铝的孔道改性、表征及转化机制

利用相分离技术制备了非晶三维贯穿大孔氧化铝初始材料，然后通过氨水水热改性处理，使其大孔形态发生了显著改变，孔壁边缘生长有尺寸为50-300 nm的片状聚集体，大孔尺寸由430 nm下降到250 nm，但仍然保持蠕虫状三维贯穿且空间分布均匀的特性。改性后的氧化铝材料经550℃焙烧转化为高结晶度γ氧化铝，比表面积达到331 m²/g，具有8.9 nm及250 nm两种集中的孔径分布，L酸度及抗压强度均有所提高。研究表明，无定形水合羟基铝离子聚合物与氨水发生再水合反应生成薄水铝石中间物，因此，可在较低的焙烧温度下转晶为γ态；大孔孔壁边缘的AlOOH晶粒受NH₄⁺模板诱导作用从里向外重排形成片状聚集体，从而改变了大孔的形态。     

Zn–Co Sulfide Microflowers Anchored on Three-Dimensional Graphene: A High-Capacitance and Long-Cycle-Life Electrode for Asymmetric Supercapacitors

Zinc–cobalt double-metal sulfides (ZCS) as Faradic electrode materials with high energy density have great potential for supercapacitors, but their poor transfer efficiency for electrons and ions hinders their electrochemical response. Herein, ZnCo₂(CO₃)_1.5(OH)₃@ZCS microflower hybrid arrays consisting of thin nanolayer petals were anchored on three-dimensional graphene (ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG) by a simple hydrothermal method and additional ion-exchange process. A ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode delivered high capacitance (2228 F g⁻¹ at 1 A g⁻¹) and long cycling life (85.7 % retention after 17 000 cycles), which are ascribed to the multicomponent structural design. The 3DG conductive substrate improves the electron-transfer dynamics of the electrode material. Meanwhile, the microflowers consisting of thin nanolayer petals could not only provide many active sites for ions to improve the capacitance, but also alleviate the volume expansion to ensure the structural stability. Furthermore, an all-solid-state asymmetric supercapacitor based on a ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode achieved a high energy density of 27 W h kg⁻¹ at 528.3 W kg⁻¹ and exhibits exceptional cyclic stability for 23 000 cycles. Its ability to light a blue LED for 9 min verified the feasibility of its application for energy storage devices.     

Reflectance and ultraviolet spectroscopy: predicting the relative growth of Saccharomyces cerevisiae in pine biomass

Ultrasound treatment favors enzymatic attack on vegetal materials and influences biological activity. The objective of this study was to develop substrates for Saccharomyces cerevisiae based on the hydrothermal treatment and ultrasound treatment of pine needle biomass. The samples subjected to ultrasound treatment at 550?°C and 650?°C showed higher reflectance bands at around 200?nm after 80?min of ultrasound treatment and lower band gap energies associated with lower IC₃₀ values. The hydrothermal treatment with 100?min of ultrasound treatment generated more promising materials for the use of the substrates with the eukaryotic model S. cerevisiae.     

ZnO超细纳米线阵列的制备及其电化学性能

以Zn(NO₃)₂· 6H₂O和C₆H₁₂N₄为原材料,采用二步水热法在碳纤维布上合成了形貌尺寸均匀的ZnO超细纳米线阵列。用 X 射线衍射(XRD)和扫描电镜(SEM)对其晶体结构和形貌进行了表征,利用恒流充放电测试等手段对其进行电化学性能测试。测试结果表明,材料表现出优异的电化学性能。在200 mA/g的电流密度下循环150次后,ZnO超细纳米线阵列仍然约有730 mAh/g的充放电比容量,库伦效率保持在95%以上。在1 200 mA/g的大倍率条件下,材料的充放电比容量依旧可达481 mAh/g左右,表现出十分良好的循环稳定性和可逆性能,是一种较为理想的锂离子电池负极复合材料。     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

Facile synthesis,characterization, and decolorization activity of Mn2+ and Al3+ co-doped hexagonal-like ZnO nanostructures as photocatalysts

A good photocatalyst with high efficiency can be synthesized easily using eco-friendly materials and processes. Our synthesized samples exhibit all of the aforementioned features. In this work, manganese co-doped ZnO at different weight percentages (3, 6, 9, and 15 wt.%) with and without 1.5 wt.% aluminum was synthesized by hydrothermal method, and their photocatalytic activity in aqueous solutions of methyl orange (MO) was investigated under visible light. The structural and optical properties of the samples were characterized using X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, and diffuse reflectance spectroscopy. In this work, Mn²⁺ ions in the 9%Mn/ZnO sample and Mn²⁺, Al³⁺ ions in the (9%Mn, 1.5%Al)/ZnO sample calcined at 800 °C were replaced instead with some Zn²⁺ ions in hexagonal wurtzite structures of ZnO. These structures were found next to each other in the form of a hexagonal shape that created 3D-hexagonal-like ZnO nanostructures. Finally, nanoparticles (NPs) and nano hexagonal-like ZnO nanostructures were, respectively, dispersed on the surface of 3D-hexagonal-like structure of 9%Mn/ZnO and (9%Mn, 1.5%Al)/ZnO. Diffuse reflectance spectroscopy analysis showed that the (9%Mn, 1.5%Al)/ZnO sample had more light absorption than 9%Mn/ZnO. However, contrary to our expectations, the 9%Mn/ZnO sample had better decolorization efficiency (94%) after 60 min under visible light, which could be attributed to a significant increase in the level of recombination by the aluminum ions.     

Synthesis and crystal structure of a new copper (II) complex,designed to produce efficient successor of Cu2O,toward synergy of adsorption and photodegradation of MB

A new copper (II) coordination complex formulated as [Cu (dipic)(phen)(2-MePy)]. 2H₂O ( 1 ) where phen = 1, 10-phenanthroline, dipic²⁻ = pyridine-2,6-dicarboxylato and 2-MePy = 2-methyl pyrrole was synthesized through a simple and environment-friendly reaction under ultrasound irradiation. Also, complex 1 was synthesized by hydrothermal process at 120 °C for 3 days. The corresponding structure of complex 1 was characterized by elemental analysis, atomic absorption spectroscopy (AAS), inductively coupled plasma (ICP), conductivity measurement, Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, ultraviolet–visible spectroscopy (UV–Vis), thermal gravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and fluorescence. The crystal structure of the hydrothermally synthesized complex was characterized by single crystal X-ray diffraction (SC-XRD(, which revealed a triclinic structure. In the remainder of this study, the Cu₂O nanoparticles have been prepared via thermal decomposition of hydrothermal and ultrasound complexes and characterized by ICP, FT-IR, powder X-ray diffraction (XRD), SEM and N₂ adsorption/desorption. Adsorption and visible-light-driven photocatalytic capabilities of two synthetic Cu₂O were investigated in the removal of MB from water. The result showed that the synthesized catalysts have good catalytic activity and the photocatalytic degradation is more effective in dye removal of MB compared with the adsorption.     

Recyclable MoO3 nanobelts for photocatalytic degradation of Rhodamine B by near infrared irradiation

Molybdenum trioxide (MoO₃) represented an excellent photocatalytic performance with many applications, including degradation of organic contaminants and splitting of water. This paper presented a new route to synthesize MoO₃ nanobelts with high aspect ratios and crystallinity by a hydrothermal technique. This work showed that the as-synthesized nanobelts exhibited strong photocatalytic activity to degrade an organic dye of Rhodamine B (RhB) in aqueous solution under the exposure of the light source in the near infrared wavelength range, significantly improving the photocatalytic activity of the nanobelts. The results also showed that for a small concentration of RhB at 7.5 mg/L a complete photodegradation (for a given MoO₃ nanobelts quantity of 0.1 g) can be reached after exposing for 60 min. For all concentrations of the RhB solution, the photodegradation exhibited an exponential dependence on the exposure time followed by a sudden shutdown, but no complete photodegradation can be reached. Also, the residual quantity of RhB in solution after the photocatalytic reaction was determined by the initial RhB concentration. The photocatalytic degradation can be interpreted by the pseudo–first-order equation for the absorption of liquid/solid based on solid capacity; thus, photocatalytic degradation can be attributed to the interaction between the photoexcited electrons in the substrate and the antibonding orbital of the RhB in solution. The sudden shutdown was due to the inability of the photoexcited electrons in the substrate hopping to the antibonding orbital of RhB in the presence of the RhB intermediate products from the degraded RhB. In addition, this work showed that the photocatalytic reaction can be recovered after a thermal treatment of postreacted MoO₃ nanobelts, enhancing the utilization efficiency of the catalysis.