Skyrmion transport driven by pure voltage generated strain gradient

The magnetic skyrmion transport driven by pure voltage-induced strain gradient is proposed and studied via micromagnetic simulation. Through combining the skyrmion with multiferroic heterojunction, a voltage-induced uniaxial strain gradient is adjusted to move skyrmions. In the system, a pair of short-circuited trapezoidal top electrodes can generate the symmetric strain. Due to the symmetry of strain, the magnetic skyrmion can be driven with a linear motion in the middle of the nanostrip without deviation. We calculate the strain distribution generated by the trapezoidal top electrodes pair, and further investigate the influence of the strain intensity as well as the strain gradient on the skyrmion velocity. Our findings provide a stable and low-energy regulation method for skyrmion transport.     

WO3/g-C3N4异质结催化剂的制备及其氧化脱硫性能

以尿素和钨酸铵为原料采用浸渍法制备了金属氧化物三氧化钨（WO₃）与石墨相氮化碳（g-C₃N₄）异质结复合材料WO₃/g-C₃N₄。采用XRD、UV-vis、SEM、PL和XPS表征手段考察了催化剂的理化性质，发现WO₃与g-C₃N₄存在较好的相互作用和电子转移，保证了WO₃/g-C₃N₄本身所具有较高的氧化脱硫活性。以WO₃/g-C₃N₄作为催化剂，过氧化氢异丙苯为氧化剂，考察其光催化氧化脱硫性能，在反应温度80℃，O/S物质的量比为3.0的反应条件下，反应180 min，二苯并噻吩（DBT）转化率可以达到72.79%。通过游离基捕获实验，发现超氧自由基（·O₂^-）、电子（e^-）、羟基自由基（·OH）起到了促进反应速率的作用，并对该体系的反应机理进行了探讨。     

Microstructure evolution and passivation quality of hydrogenated amorphous silicon oxide(a-SiOx:H) on〈100〉- and 〈111〉-orientated c-Si wafers

Hydrogenated amorphous silicon oxide(a-SiOx:H) is an attractive passivation material to suppress epitaxial growth and reduce the parasitic absorption loss in silicon heterojunction(SHJ) solar cells. In this paper, a-SiOx:H layers on different orientated c-Si substrates are fabricated. An optimal effective lifetime(τ(eff)) of 4743 μs and corresponding implied opencircuit voltage(iV(oc)) of 724 mV are obtained on〈100〉-orientated c-Si wafers. While τ(eff) of 2429 μs and iV_oc of 699 mV are achieved on 111-orientated substrate. The FTIR and XPS results indicate that the a-SiOx:H network consists of SiOx(Si-rich), Si–OH, Si–O–SiHx, SiO2 ≡ Si–Si, and O3 ≡ Si–Si. A passivation evolution mechanism is proposed to explain the different passivation results on different c-Si wafers. By modulating the a-SiOx:H layer, the planar silicon heterojunction solar cell can achieve an efficiency of 18.15%.     

单层n型MoS2/p型c-Si异质结太阳电池数值模拟

单层二硫化钼(MoS₂)是一种具有优异光电性能的半导体材料,在太阳能能量转换中表现出很大的应用潜力。本文基于AMPS模拟软件,对单层n型MoS₂/p型c-Si异质结太阳电池进行了数值模拟与分析。通过模拟优化,n型MoS₂的电子亲和能为3.75 eV、掺杂浓度为10¹⁸ cm^-3,p型c-Si的掺杂浓度为10¹⁷ cm^-3时,太阳电池能够取得最高22.1%的转换效率。最后模拟了n型MoS₂/p型c-Si异质结界面处的界面态对太阳电池性能的影响,发现界面态密度超过10¹¹ cm^-2·eV^-1时会严重影响太阳电池的光伏性能。     

Effect of additive length and chemistry on the morphology of blends of conjugated thiophenes and fullerene derivative acceptor molecules

Small molecule additives have been shown to increase the device efficiency of conjugated polymer (donor) and fullerene derivative (acceptor) based organic solar cells by modifying the morphology of the device active layer. In this paper we conduct a systematic study of how additives affect the donor‐acceptor morphology using molecular dynamics simulations of blends of thiophene‐based oligomers, mimicking poly(3‐dodecylthiophene) (P3DDT) or poly(2,2′:5′,2”‐3,3”‐didocyl‐terthiophene) (PTTT), and fullerene derivatives with additives of varying length and chemical functionalization, mimicking experimentally used additives like methyl ester additives, diiodooctane, and alkanedithiols. We find that functionalization of additives with end groups that are attracted to acceptor molecules are necessary to induce increased donor‐acceptor macrophase separation. In blends where acceptors intercalate between oligomer alkyl side chains, functionalized additives decrease acceptor intercalation. Functionalized additives with shorter alkyl segments increase acceptor macrophase separation more than additives with same chemical functionalization but longer alkyl segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1046–1057     

Review on the Properties of Boron-Doped Diamond and One-Dimensional-Metal-Oxide Based P-N Heterojunction

This review is mainly focused on the optoelectronic properties of diamond-based one-dimensional-metal-oxide heterojunction. First, we briefly introduce the research progress on one-dimensional (1D)-metal-oxide heterojunctions and the features of the p-type boron-doped diamond (BDD) film; then, we discuss the use of three oxide types (ZnO, TiO₂ and WO₃) in diamond-based-1D-metal-oxide heterojunctions, including fabrication, epitaxial growth, photocatalytic properties, electrical transport behavior and negative differential resistance behavior, especially at higher temperatures. Finally, we discuss the challenges and future trends in this research area. The discussed results of about 10 years’ research on high-performance diamond-based heterojunctions will contribute to the further development of photoelectric nano-devices for high-temperature and high-power applications.     

n-In0.35Ga0.65N/p-Si异质结的制备及其电学性能研究

采用双光路双靶材脉冲激光沉积(PLD)系统在p-Si衬底上外延生长InGaN薄膜,研究了InGaN薄膜的显微组织结构和n-InGaN/p-Si异质结的电学性能。研究表明,InGaN薄膜为单晶结构,沿[0001]方向择优生长,薄膜表面光滑致密,In的原子含量为35%。霍尔(Hall)效应测试表明In_0.35Ga_0.65N薄膜呈n型半导体特性,具有高的载流子浓度和迁移率及低的电阻率。I-V曲线分析表明In_0.35Ga_0.65N/p-Si异质结具有良好的整流特性,在±4 V时的整流比为25,开路电压为1.32 V。In_0.35Ga_0.65N/p-Si异质结中存在热辅助载流子隧穿和复合隧穿两种电流传输机制。经拟合,得到异质结的反向饱和电流为1.05×10^-8 A,势垒高度为0.86 eV,理想因子为6.87。     

Biohybrid Organic Heterostructure Based on Chlorophyll-Bacteriochlorophyll Aggregates for Ecofriendly Hydrogen Production

Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti₃C₂T_x nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti₃C₂T_x composite has a high HER performance with 114 μmol/h/g_cat, which is much higher than the BChl@Ti₃C₂T_x and Chl@Ti₃C₂T_x composites.     

PbSe/TiO2同轴异质结纳米管的制备及光催化性能

通过溶液法合成了PbSe/TiO2复合纳米管,并对其进行了微观形貌、晶体结构等的表征。结果表明,制得的样品是由PbSe和TiO2两种材料构成的复合材料,致密、均匀的TiO2薄膜包覆在PbSe纳米管表面。以氙灯为模拟光源,通过对甲基橙的降解研究了PbSe/TiO2复合纳米管的光催化性能。结果显示,PbSe与TiO2之间形成的异质结使PbSe/TiO2复合纳米管具有较高的光催化性能,比纯PbSe纳米管的催化降解率提高了约4.5倍。另外,对PbSe/TiO2复合纳米管光催化稳定性也进行了研究。     

MoS2/SnS异质结太阳能电池的模拟研究

硫化亚锡(SnS)是一种Ⅳ-Ⅵ族层状化合物半导体材料,其禁带宽度与太阳能电池最佳带隙1.5 eV非常接近,并且在可见光范围内光的吸收系数很大(α>10⁴ cm^-1),因此SnS是一种很有应用前景的材料。本文利用太阳能电池模拟软件wxAMPS模拟了MoS₂/SnS异质结太阳能电池,主要研究SnS吸收层的厚度、掺杂浓度和缺陷态等因素对太阳能电池性能的影响。研究发现:SnS吸收层最佳厚度为2 μm,最佳掺杂浓度为1.0×10¹⁵ cm^-3;同时高斯缺陷态浓度超过1.0×10¹⁵ cm^-3时,电池各项性能参数随着浓度的增加而减小,而带尾缺陷态超过1.0×10¹⁹ cm^-3·eV^-1时,电池性能才开始下降;其中界面缺陷态对太阳能电池影响比较严重,界面缺陷态浓度超过1.0×10¹² cm^-2时,开路电压、短路电流、填充因子和转换效率迅速下降。另外,通过模拟获得的转换效率高达24.87%,开路电压为0.88 V,短路电流为33.4 mA/cm²。由此可知,MoS₂/SnS异质结太阳能电池是一种很有发展潜力的光伏器件结构。