Effect of strain on charge density wave order in α-U

The effect of strain on charge density wave (CDW) order in $\alpha$-U is investigated within the framework of relativistic density-functional theory. The energetical stability of $\alpha$-U with CDW distortion is enhanced by the tensile strain along $a$ and $b$ axes, which is similar to the case of negative pressure and normal. However, the tensile strain along $c$ axis suppresses the energetical stability of CDW phase. This abnormal effect could be understood from the emergence of a new one-dimensional atomic chain along $c$ axis in $\alpha$-U. Furthermore, this effect is supported by the calculations of Fermi surface and phonon mode, in which the topological objects and the dynamical instability show opposite behaviors between strains along $a$/$b$ and $c$ axes.     

Supramolecular Arrangement and DFT analysis of Zinc(II) Schiff Bases: An Insight towards the Influence of Compartmental Ligands on Binding Interaction with Protein

We report, for the first time, a detailed crystallographic study of the supramolecular arrangement for a set of zinc(II) Schiff base complexes containing the ligand 2,6-bis((E)-((2-(dimethylamino)ethyl)imino)methyl)-4-R-phenol], where R=methyl/tert-butyl/chloro. The supramolecular study acts as a pre-screening tool for selecting the compartmental ligand R of the Schiff base for effective binding with a targeted protein, bovine serum albumin (BSA). The most stable hexagonal arrangement of the complex [Zn − Me] (R=Me) stabilises the ligand with the highest FMO energy gap (ΔE=4.22 eV) and lowest number of conformations during binding with BSA. In contrast, formation of unstable 3D columnar vertebra for [Zn − Cl] (R=Cl) tend to activate the system with lowest FMO gap (3.75 eV) with highest spontaneity factor in molecular docking. Molecular docking analyses reported in terms of 2D LigPlot+ identified site A, a cleft of domains IB, IIIA and IIIB, as the most probable protein binding site of BSA. Arg144, Glu424, Ser428, Ile455 and Lys114 form the most probable interactions irrespective of the type of compartmental ligands R of the Schiff base whereas Arg185, Glu519, His145, Ile522 act as the differentiating residues with ΔG=−7.3 kcal mol⁻¹.     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

Improving the performance and reducing the manufacturing costs are the main directions for the development of organic solar cells in the future. Here, the strategy that uses chemical structure modification to optimize the photoelectric properties is reported. A new narrow bandgap (1.30 eV) chlorinated non-fullerene electron acceptor (Y15), based on benzo[d][1,2,3] triazole with two 3-undecyl-thieno[2′,3′:4,5] thieno[3,2-b] pyrrole fused -7-heterocyclic ring, with absorption edge extending to the near-infrared (NIR) region, namely A-DA'D-A type structure, is designed and synthesized. Its electrochemical and optoelectronic properties are systematically investigated. Benefitting from its NIR light harvesting, the fabricated photovoltaic devices based on Y15 deliver a high power conversion efficiency (PCE) of 14.13%, when blending with a wide bandgap polymer donor PM6. Our results show that the A-DA'D-A type molecular design and application of near-infrared electron acceptors have the potential to further improve the PCE of polymer solar cells (PSCs).     

Ultrathin Silicon Oxide Film-Induced Enhancement of Charge Separation and Transport of Nanostructured Titanium(IV) Oxide Photoelectrode

The development of nanostructured semiconductor electrodes represented by a mesoporous TiO₂ nanocrystalline (mp-TiO₂) film is currently bringing great progresses in photoelectrochemical (PEC) devices for solar-to-electricity and solar-to-chemical conversion. Two serious losses can occur in PEC devices: 1) recombination between the conduction band (CB) electrons and valence band (VB) holes in the bulk and at the surface and 2) back reaction or electron trapping by oxidant in the electrolyte solution during transport to the electron-collecting electrode. Thus, the major challenge in common with the nanostructured semiconductor photoanodes is to achieve efficient charge separation and electron transport. In this study, an ultrathin SiO_x layer was formed on both the external and the internal surface of mp-TiO₂ using an original chemisorption-calcination technique employing 1,3,5,7-tetramethyltetrasiloxane as a starting material. The SiO_x surface modification of the mp-TiO₂ photoanode drastically prolongs the mean lifetime of CB-electrons in TiO₂ because of enhanced charge separation and electron transport by the negative charge applied in aqueous electrolyte solution. We have demonstrated that the performance of a one-compartment H₂O₂-photofuel cell using mp-TiO₂ as the photoanode is greatly boosted by the surface modification with the SiO_x layer. We anticipate that this methodology is widely applicable to nanostructured metal oxide semiconductor electrodes, contributing to the improvement in the performance of PEC devices.     

Divagations about the periodic table: Boolean hypercube and quantum similarity connections

In this study, several simple aspects associated with the periodic table (PT) of the elements are commented. First, the connection of the PT with the structure of a seven-dimensional Boolean hypercube leads afterward to discuss the nature of those PT elements bearing prime atomic numbers. Second, the use of quantum similarity (QS) to obtain an alternative insight on the PT element relations will be also developed. The foundation of the second part starts admitting that any element of the PT can be attached to a schematic electronic density function, constructed with a single Gaussian function: a Gaussian atomic density function, allowing to consider the PT elements as a set of quantum objects, and permits a straightforward construction of a QS matrix. Such QS scheme can be applied to the whole PT or to any subset of it. Manipulation of the QS matrices attached to any quantum object set allows the evaluation of statistical-like values, acting as coordinates to numerically or graphically represent the chosen PT atomic element sets. © 2019 Wiley Periodicals, Inc.     

XPS study of silicon spheres as a density standard

As density is one of the basic physical properties of materials, an accurate density standard is absolutely essential. To determine density with high accuracy and precision, two 1-kg single-crystal silicon spheres (NMIJ-S4 and NMIJ-S5) are used as the primary standard at the National Metrology Institute of Japan. For the accurate measurement of the mass and volume of the silicon spheres, the effects of the surface layer must be carefully considered. In this work, a surface layer model of NMIJ-S4 and NMIJ-S5 was proposed and the thicknesses of each surface layer were determined using X-ray photoelectron spectroscopy. A detailed uncertainty budget is presented to aid use of the density standard.     

Size‐Dependence of the Melting Temperature of Individual Au Nanoparticles

Nanoparticles have an immense importance in various fields, such as medicine, catalysis, and various technological applications. Nanoparticles exhibit a significant depression in melting point as their size goes below ≈10 nm. However, nanoparticles are frequently used in high temperature applications such as catalysis where temperatures often exceed several 100 degrees which makes it interesting to study not only the melting temperature depression, but also how the melting progresses through the particle. Using high‐resolution transmission electron microscopy, the melting process of gold nanoparticles in the size range of 2–20 nm Au nanoparticles combined with molecular dynamics studies is investigated. A linear dependence of the melting temperature on the inverse particle size is confirmed; electron microscopy imaging reveals that the particles start melting at the surface and the liquid shell formed then rapidly expands to the particle core.     

Synthesis,spectroscopic, DFT,biological studies and molecular docking of oxovanadium (IV), copper (II) and iron (III) complexes of a new hydrazone derived from heterocyclic hydrazide

A new Schiff base hydrazone (Z)‐2‐(2‐aminothiazol‐4‐yl)‐N′‐(2‐hydroxy‐3‐methoxybenzylidene) acetohydrazide (H₂L) and its chelates [VO (HL)₂]·5H₂O, [Cu (HL)Cl(H₂O)]·2H₂O and [Fe(L)Cl(H₂O)₂]·3H₂O have been isolated and characterized using different physico‐chemical methods, for example infrared (IR), electron paramagnetic resonance (EPR), thermogravimetric analysis and DTG in the solid state, and ¹H‐NMR, ¹³C‐NMR and UV in solution. Magnetic and UV–visible measurements proposed that the coordination environments are square pyramidal, tetrahedral and octahedral geometries for oxovanadium (IV), Cu (II) and Fe (III), respectively. The ligand acts as mono‐negative NO towards oxovanadium (IV) and Cu (II) ions, and bi‐negative ONO for Fe (III) ion. The geometries of the ligand and its complexes were performed using Gaussian 9 program with density functional theory. The EPR spectral data of oxovanadium (IV) and Cu (II) chelates confirmed the mentioned geometries. The molecular modeling was done, and illustrated bond lengths, bond angles, molecular electrostatic potential, Mulliken atomic charges and chemical reactivity for the inspected compounds. Theoretical IR and ¹H‐NMR of the free ligand were calculated. Furthermore, thermodynamic and kinetic parameters for thermal decomposition steps were studied. Docking study of H₂L was applied against the proteins of both bacterial strains Staphylococcus aureus and Escherichia coli, as well as the protein of xanthine oxidase as antioxidant agent by Schrödinger suite program utilizing XP glide protocol. Furthermore, antimicrobial, antioxidant and DNA‐binding activities of the compounds have been carried out.