丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

大斯托克斯位移远红光至近红外荧光探针用于检测肝损伤过程中过氧化亚硝酸盐的动态变化

肝损伤是影响公众健康的重大问题之一, 已经引起了人们越来越多的关注. 而过表达的过氧化亚硝酸盐(ONOO^?)在肝损伤等疾病的发病机制中起着重要作用, 被认为是一种与早期肝损伤密切相关的生物活性分子. 因此, 为了探究ONOO^?在肝损伤过程中的作用, 开发可以实现肝损伤过程中ONOO^?高选择性和实时检测的分析方法具有重要意义. 本文报道了一种具有大斯托克斯位移的远红光至近红外(FR-NIR)ONOO^?荧光探针. 由于该探针具有大的斯托克斯位移, 可以有效消除光谱重叠和自吸收的干扰, 从而显著提高成像的信噪比. 此外, 该探针对ONOO^?具有高的灵敏度(检出限为25.8 nmol/L)和良好的选择性, 被成功用于药物诱导肝损伤过程中ONOO^?信号的成像检测.     

Polymer Scaffolds for Biomedical Applications in Peripheral Nerve Reconstruction

The nervous system is a significant part of the human body, and peripheral nerve injury caused by trauma can cause various functional disorders. When the broken end defect is large and cannot be repaired by direct suture, small gap sutures of nerve conduits can effectively replace nerve transplantation and avoid the side effect of donor area disorders. There are many choices for nerve conduits, and natural materials and synthetic polymers have their advantages. Among them, the nerve scaffold should meet the requirements of good degradability, biocompatibility, promoting axon growth, supporting axon expansion and regeneration, and higher cell adhesion. Polymer biological scaffolds can change some shortcomings of raw materials by using electrospinning filling technology and surface modification technology to make them more suitable for nerve regeneration. Therefore, polymer scaffolds have a substantial prospect in the field of biomedicine in future. This paper reviews the application of nerve conduits in the field of repairing peripheral nerve injury, and we discuss the latest progress of materials and fabrication techniques of these polymer scaffolds.     

基于人体损伤的中低速正面碰撞气囊点火状态分析方法研究

为降低驾驶员在中低速碰撞下受到的损伤, 利用2010年版丰田Yaris整车模型建立100%正面刚性壁碰撞有限元模型, 并根据驾驶员舱布置及相关法规要求建立Madymo约束系统仿真模型, 以验证有限元模型的准确性. 利用建立的碰撞模型, 在中低速碰撞中对不同气囊点火状态下的驾驶员所受损伤进行仿真. 结果表明, 该车型在35 km●h^-1及以上车速时, 点爆气囊能有效减少驾驶员损伤; 30 km●h^-1及以下车速时, 气囊点火会对驾驶员造成额外伤害; 中低速碰撞下, 驾驶员的胸部损伤程度较头部更容易受气囊点火时间影响.     

Combined Delivery of a Lipopolysaccharide‐Binding Peptide and the Heme Oxygenase‐1 Gene Using Deoxycholic Acid‐Conjugated Polyethylenimine for the Treatment of Acute Lung Injury

A ternary complex comprising plasmid DNA, lipopolysaccharide‐binding peptide (LBP), and deoxycholic acid‐conjugated polyethylenimine (PEI‐DA) is prepared for combinational therapy of acute lung injury (ALI). The LBP is designed as an anti‐inflammatory peptide based on the lipopolysaccharide (LPS)‐binding domain of HMGB‐1. In vitro cytokine assays show that LBP reduces levels of proinflammatory cytokines by inhibiting LPS. PEI‐DA is synthesized as the gene carrier by conjugation of deoxycholic acid to low‐molecular weight polyethylenimine (2 kDa, PEI2k). PEI‐DA has higher transfection efficiency than high‐molecular weight polyethylenimine (25 kDa, PEI25k). The ternary complex of an HO‐1 plasmid (pHO‐1), PEI‐DA, and LBP is prepared as a combinational system to deliver the therapeutic gene and peptide. The transfection efficiency of the ternary complex is higher than that of the pHO‐1/PEI‐DA binary complex. The ternary complex also reduces TNF‐α secretion in LPS‐activated Raw264.7 macrophage cells. Administration of the ternary complex into the lungs of an animal ALI model by intratracheal injection induces HO‐1 expression and reduces levels of proinflammatory cytokines more efficiently than the pHO‐1/PEI‐DA binary complex or LBP alone. In addition, the ternary complex reduces inflammation in the lungs. Therefore, the pHO‐1/PEI‐DA/LBP ternary complex may be an effective treatment for ALI.

     

纳米材料用于放疗防护的研究进展

放射治疗是利用高能射线抑制癌细胞增殖的治疗方法, 已广泛用于恶性肿瘤的治疗. 但是, 高能射线不可避免地会对机体的正常组织造成损害, 产生放疗相关副作用. 尽管目前有一些小分子放疗防护药物已应用于临床或处于临床前研究, 但其较短的血液循环时间和较快的新陈代谢速度极大地削弱了其防护效果. 近20年来, 随着纳米技术在生物医学领域的飞速发展, 纳米放疗防护剂的出现为提高防护效果提供了新的选择. 通过合理地设计和开发纳米放疗防护剂, 有望解决现有小分子放疗防护药物的缺陷. 鉴于纳米放疗防护剂具有诸多优势, 本Review概述了纳米放疗防护材料的常见设计策略, 同时分析了放射诱导的常见疾病的致病机制和纳米放疗防护材料防治各种放射诱导疾病的研究现状. 最后, 还讨论了纳米材料用于放疗防护所面临的挑战和未来前景.     

Quantification of Volatile Aldehydes Deriving from In Vitro Lipid Peroxidation in the Breath of Ventilated Patients

Exhaled aliphatic aldehydes were proposed as non-invasive biomarkers to detect increased lipid peroxidation in various diseases. As a prelude to clinical application of the multicapillary column–ion mobility spectrometry for the evaluation of aldehyde exhalation, we, therefore: (1) identified the most abundant volatile aliphatic aldehydes originating from in vitro oxidation of various polyunsaturated fatty acids; (2) evaluated emittance of aldehydes from plastic parts of the breathing circuit; (3) conducted a pilot study for in vivo quantification of exhaled aldehydes in mechanically ventilated patients. Pentanal, hexanal, heptanal, and nonanal were quantifiable in the headspace of oxidizing polyunsaturated fatty acids, with pentanal and hexanal predominating. Plastic parts of the breathing circuit emitted hexanal, octanal, nonanal, and decanal, whereby nonanal and decanal were ubiquitous and pentanal or heptanal not being detected. Only pentanal was quantifiable in breath of mechanically ventilated surgical patients with a mean exhaled concentration of 13 ± 5 ppb. An explorative analysis suggested that pentanal exhalation is associated with mechanical power—a measure for the invasiveness of mechanical ventilation. In conclusion, exhaled pentanal is a promising non-invasive biomarker for lipid peroxidation inducing pathologies, and should be evaluated in future clinical studies, particularly for detection of lung injury.     

S波段微波热致超声成像系统研究

微波热致超声成像技术通过向物体发射微波脉冲, 导致物体吸收电磁波温度迅速升高, 产生瞬时压力波, 从而激发产生超声波信号, 通过传感器对产生的超声波信号进行采集并成像, 最终还原了反映物体吸收电磁波能量特性的图像, 由于此方法兼具了微波成像的高对比性和超声成像的高分辨率特点, 理论上验证了热声成像技术对早期乳腺肿瘤检测的可行性. 本实验兼顾系统成像深度和分辨率, 采用S波段的微波脉冲信号源对物体进行辐射, 利用圆形扫描方式对待测物体进行检测, 同时为了更好的验证成像性能, 本实验同时使用了肿瘤仿体及实际生物组织进行成像实验. 通过实验分析, 验证了该系统对肿瘤仿体和生物组织检测的有效性, 以及系统的高分辨率和高对比度特性, 为早期乳房肿瘤检测提供了进一步的理论支撑.     

Anti-miss-shot control device for selective stone disintegration in extracorporeal shock wave lithotripsy

A new device to prevent erroneously focused shock waves to the renal parenchyma during extracorporeal shock wave lithotripsy (ESWL) has been developed; an anti-miss-shot control device (AMCD) and experiments have been conducted to evaluate its effectiveness. For shock wave generation and stone localization, piezoceramic elements (PSE) and ultrasound localization, respectively were used. After stone localization, probing ultrasounds (PU) were emmitted from the PSE towards the focal region and the reflected sound levels (RSL) were monitored by the PSE which also functioned as a microphone. A direct hit by the PU to the stone or a miss was judged from the RSL, i.e. a high RSL indicates a direct hit and a low RSL indicates a miss. Shock waves were generated only when the RSL exceeded the level which indicated a direct hit. The experimental results showed that the injury to the renal parenchyma was decreased by using the AMCD. Clinical application of the AMCD is expected to increase the safety of ESWL.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

Driven torsion pendulum for measuring the complex shear modulus in a steady shear flow

To investigate the viscoelastic behavior of fluid dispersions under steady shear flow conditions, an apparatus for parallel superimposed oscillations has been constructed which consists of a rotating cup containing the liquid under investigation in which a torsional pendulum is immersed. By measuring the resonance frequency and bandwidth of the resonator in both liquid and in air, the frequency and steady-shear-rate-dependent complex shear modulus can be obtained. By exchange of the resonator lumps it is possible to use the instrument at four different frequencies: 85, 284, 740, and 2440 Hz while the steady shear rate can be varied from 1 to 55 s^–1. After treatment of the theoretical background, design, and measuring procedure, the calibration with a number of Newtonian liquids is described and the accuracy of the instrument is discussed.Notation a radius of the lump - A geometrical constant - b inner radius of the sample holder - c constant - C ₁, C ₂ apparatus constants - D damping of the pendulum - e _x , e _y , e _z Cartesian basis - e _r , e , e _z orthonormal cylindrical basis - E geometrical constant - E _t , ⁰ E _t , _t relative strain tensor - f function of shear rate - F _t relative deformation tensor - G (t) memory function - G ^* complex shear modulus - G Re(G ^* ) - G Im(G ^* ) - h distance between plates - H ^* transfer function - , functional - i imaginary unit: i ²= – 1 - I moment of inertia - J _exc excitation current - J ₀ amplitude of J _exc - k ^* = k – ik complex wave number - K torsional constant - K fourth order tensor - l length of the lump - L mutual inductance - M _dr driving torque - M _liq torque exerted by the liquid - ⁰ M _liq, _liq steady state and dynamic part of Mliq - n power of the shear rate - p isotropic pressure - Q quality factor - r radial position - R,R ₀, R _c Re(Z ^*, Z ₀ ^* , Z _c ^* ) - s time - t, t time - T temperature - T, ⁰ T, stress tensor - u velocity - U lock-in output - ₀ velocity - V _det detector output voltage - V _sig, V _cr signal and cross-talk part of V _det - x Cartesian coordinate - X , X ₀, X _c Im(Z ^*, Z ₀ ^* , Z _c ^* ) - y Cartesian coordinate - z Cartesian coordinate, axial position