酚醛层压材料的冲击力学行为及本构模型

为了研究酚醛层压材料的冲击力学行为并获得本构模型，利用万能试验机和整形修正的分离式霍普金森压杆(SHPB)装置，对材料试样进行了应变率范围为10-3~103 s-1的单轴压缩实验，得到了不同加载应变率下的应力应变曲线，对其在准静态、动态载荷下的压缩破坏机理进行了初步探讨。结果表明，酚醛层压材料具有较强的应变率效应，与准静态(1.67×10-3 s-1)时相比，在动态载荷(7×102 s-1)下，峰值应力增加了约10倍；破坏应变减少了约一半；在准静态和动态加载条件下试样力学性能的差异是由于纤维基体界面特性以及不同应变率下破坏模式的不同；采用朱-王-唐本构方程描述了酚醛层压材料力学行为，拟合得到了本构方程的系数，在加载过程中，理论计算值与实验结果吻合较好。     

基于Oda裂隙结构张量的流纹岩各向异性试验研究

岩石内天然存在长度、倾角和形态不同的裂隙,造成岩石的各向异性特征。为揭示岩石内天然随机裂隙发育特征对岩石物理力学特性的影响规律,以泥巴山隧址区采集裂隙性流纹岩为研究对象,首先对试样裂隙进行素描统计分析;然后基于Oda裂隙结构张量,获得天然随机分布裂隙的几何统计参数;最后对裂隙性流纹岩试样分别进行单轴和常规三轴压缩试验,得到不同应力路径下流纹岩的应力-应变曲线及物理力学参数。分析Oda裂隙结构张量定义的各向异性参数与试验获得的力学参数之间的规律,研究结果表明:(1)Oda裂隙结构张量适用于天然随机分布裂隙的几何统计分析,各向异性参数A(F)越大,裂隙优势方向越明显;(2)单轴压缩下,随着各向异性参数I1和A(F)的增大,流纹岩各向异性程度增大,弹性模量减小,泊松比增大;(3)常规三轴压缩下,流纹岩弹性模量和泊松比随各向异性参数改变的规律较不明显,Oda裂隙结构张量不再适用。     

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

Carbonized cotton fibers via a facile method for highly sensitive solid‐phase microextraction of polycyclic aromatic hydrocarbons

Cotton fiber is an environmentally friendly and natural material with a certain extraction capacity, while its enrichment ability is poor. In order to improve the extraction efficiency of cotton fibers, it was carbonized to form a layer of amorphous carbon as the sorbent by a simple carbonization method. Carbonized cotton fibers were filled into a polyetheretherketone tube for in‐tube solid‐phase microextraction. The carbonization time was investigated to obtain high extraction efficiency. Coupled to high‐performance liquid chromatography, the extraction tube was evaluated with polycyclic aromatic hydrocarbons, estrogens and phthalates, and it exhibited best extraction efficiency for polycyclic aromatic hydrocarbons. Under the optimum conditions, an online analysis method for several polycyclic aromatic hydrocarbons was established with large linear ranges (0.016–0.20 μg/L), low limits of detection (0.005–0.020 μg/L), and high enrichment factors (948–2874). Analysis method was successfully applied to the detection of targets in the real samples and shown satisfactory durability and chemical stability. Moreover, the relative recoveries ranged from 82 to 119.2%, which demonstrated the applicability of carbonized cotton fibers in sample preparation. Compared with other reported methods, the proposed method provided shorter extraction time, higher enrichment factors, comparable limits of detection, and recoveries.     

Glass fabrics self-cracking catalytic growth of boron nitride nanotubes

Glass fabrics were used to fabricate boron nitride nanotubes (BNNTs) with a broad diameter range through a combined chemical vapor deposition and self-propagation high-temperature synthesis (CVD-SHS) method at different holding times (0min, 30min, 90min, 180min and 360min). SEM characterization has been employed to investigate the macro and micro structure/morphology changes of the glass fabrics and BNNTs in detail. SEM image analysis has provided direct experimental evidences for the rationality of the optimized self-cracking catalyst VLS growth mechanism, including the transformation situations of the glass fabrics and the BNNTs growth processes respectively. This paper was the further research and compensation for the theory and experiment deficiencies in the new preparation method of BNNTs reported in our previous work. In addition, it is likely that the distinctive self-cracking catalyst VLS growth mechanism could provide a new idea to preparation of other inorganic functional nano-materials using similar one-dimensional raw materials as growth templates and catalysts.     

Citronellol-Based Long-Lasting Antibacterial Cotton Fabrics without Bacterial Resistance

Antibacterial cotton helps prevent the growth and spread of harmful microorganisms, reduces the risk of infection, and has a prolonged service life by reducing bacterial degradation. However, most antibacterial agents used are toxic to humans and the environment. Citronellol-poly(N,N-dimethyl ethyl methacrylate) (CD), a highly effective antibacterial polymer, is synthesized from natural herbal essential oils (EOs). CD exhibited efficient, rapid bactericidal activity against Gram-positive, Gram-negative, and drug-resistant bacteria. Citronellol's environmental benignity makes CDs less hemolytic. Notably, negligible drug resistance developed after 15 bacterial subcultures. The CD-treated cotton fabric displayed better antibacterial performance than AAA-grade antibacterial fabric, even after repeated washing. This study extends the practical application of EOs to antibacterial surfaces and fabrics, which is promising for use in personal care products and medical settings.     

An amino trimethylene phosphonic acid-based chelated boric acid complex that works as a synergistic flame retardant for enhancing the flame retardancy of cotton fabrics

The chelating ligands of boric acid and amino trimethyl phosphonate prepared a novel flame retardant (BAP) for the cotton fabric. A stable chemical and coordination bond was formed on the surface of the cotton fibers by a simple three-curing finishing process to make the fabric exhibits excellent durable flame retardancy. Cotton fabrics' tensile strength and whiteness got substantially retained after BAP treatment. 90 g/L BAP-treated samples (3 curing times, 50 laundry cycles) showed good flame retardancy and durability, holding the largest limit oxygen index, 29.7%, and the shortest damage length, 61 mm. A condensed phase and gas phase synergistic flame retardant mechanism was concluded by thermogravimetric, cone calorimeter tests, and thermogravimetric infrared analysis.     

光子晶体结构色织物研究进展

针对结构色织物难以产业化的现状,从光学效应和能够产生结构色的周期性结构两个角度系统介绍了结构色织物生色机理。随后,按照结构色织物表面光子晶体结构特征、所用光子晶体基元种类及结构色制备方法,对结构色织物进行了系统分类归纳,并指出了各自的优缺点。此外,现有结构色织物研究均为基于已有纳米粒子尺寸来表征对应结构色颜色,缺乏根据实际颜色需求选取光子晶体尺寸的研究。我们根据现有文献报道的光子晶体基元尺寸与所得结构色织物颜色种类的对应关系,通过计算得到了根据所需织物颜色种类确定光子晶体基元尺寸的公式。最后总结了结构色织物制备存在的问题,并给出了合理建议。     

一种新型均匀扩散器流场的数值模拟

异性纤维检出设备中扩散器内部流场的情况,直接影响着落棉率和整个清除系统的工作效率.本文用计算流体力学软件FLUENT对新型均匀扩散器的流场进行数值模拟,通过改进扩散器的结构参数,实现流场的均匀和稳定,进而提高整个系统纤维检出设备的清除效率.之后对计算结果进行分析,提出了两种经过结构优化的改进模型,并分析了其内部流场.     

织物力学研究的新进展

简要地回顾了织物力学的发展历史,重点介绍近10几年来,在服装CAD核心------"试衣系统"的技术需求的刺激下,在织物悬垂、屈曲方面研究的进展.特别是关于织物屈曲研究的开展,涉及到了织物本构理论这个织物力学中最基础的问题,织物细观本构理论的建立和对织物一系列屈曲现象的成功的解析分析是织物力学研究的最新进展,构成了近代织物力学的主要内容.最后,对今后织物力学研究的方向进行了展望.