Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

Ni、Mo共掺杂对SnO2材料性能影响的仿真研究

针对AgSnO₂触头材料存在的不足,采用基于密度泛函理论的第一性原理对SnO₂、Ni单掺杂、Mo单掺杂以及Ni-Mo共掺杂SnO₂材料进行了电性能与力学性质的研究,计算了各体系的形成能、能带结构、态密度、弹性常数等各项参数。结果表明,掺杂后的材料可以稳定存在,且仍为直接带隙半导体材料。与未掺杂相比,掺杂后体系的能带结构带隙值减少,其中Ni-Mo共掺杂时的带隙值最小,载流子跃迁所需能量减少,极大地改善了SnO₂的电性能;由弹性常数计算了剪切模量、体积模量、硬度等参数,其中Ni-Mo共掺杂时的硬度大幅降低,韧性增强,有利于AgSnO₂触头材料后续加工成型,且其普适弹性各向异性指数最小,不易形成裂纹。综合各项因素,Ni-Mo共掺杂能够很好地改善SnO₂的性能,为触头材料的发展提供了理论指导。     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

硼、氮共掺杂多孔碳的制备及其超电容性能

分别以含氮菲咯啉、四硼酸钾和醋酸锌为碳源、活化剂和模板,制备了B、N共掺杂多孔碳(BN-PC),并探究模板质量对BN-PC结构和储电性能的影响。当醋酸锌质量为5 g时,所得BN-PC₅中B、N杂原子含量分别为20.21%、18.29%。电化学测试结果表明,以6 mol·L^-1KOH为电解液,BN-PC₅电极展现出高的比电容(在0.05 A·g^-1电流密度下为255 F·g^-1)、优异的倍率性能(在20 A·g^-1电流密度下为188 F·g^-1)和卓越的循环稳定性(在5 A·g^-1的电流密度下循环10 000次比电容保持率为97%)。以3mol·L^-1ZnSO₄为电解液,在平均功率密度为56 W·kg^-1时,BN-PC₅电容器的能量密度可达27 Wh·kg^-1。     

The synergistic catalysis on Co nanoparticles and CoN_x sites of aniline-modified ZIF derived Co@NCs for oxidative esterification of HMF

An efficient sustainable and scalable strategy for the synthesis of porous cobalt/nitrogen co-doped carbons(Co@NCs) via pyrolysis of aniline-modified ZIFs,has been demonstrated.Aniline can coordinate and absorb on the surface of ZIF(ZIF-CoZn3-PhA),accelerate the precipitation of ZIFs,thus resulting in smaller ZIF particle size.Meanwhile,the aniline on the surface of ZIF-CoZn3-PhA promotes the formation of the protective carbon shell and smaller Co nanoparticles,and increases nitrogen content of the catalyst.Because of these prope rties of Co@NC-PhA-3,the oxidative esterification of 5-hydroxymethylfurfural can be carried out under ambient conditions.According to our experimental and computational results,a synergistic catalytic effect between CoN_x sites and Co nanoparticles has been established,in which both Co nanoparticles and CoN_x can activate O_2 while Co nanoparticles bind and oxidize HMF.Moreover,the formation and release of active oxygen species in CoN_x sites are reinfo rced by the electronic interaction between Co nanoparticles and CoN_x.     

Enhanced room temperature ferromagnetism and photoluminescence behavior of Cu-doped ZnO co-doped with Mn

Cu, Mn co-doped ZnO nanoparticles were successfully synthesized by the sol–gel technique. XRD pattern described that Mn-doping did not affect the hexagonal wurtzite structure of the samples and no secondary phases were found. The reduced crystallite size at Mn=2% is due to the suppression of grain surface growth by foreign impurity. The enhancement of crystal size after Mn=2% is due to the expansion of lattice volume produced by the distortion around the dopant ion. The better dielectric constant and conductivity noticed at Mn=2% are explained by charge carrier density and crystallite size. The suppression of broad UV band by Mn-doping is discussed based on the generation of non-radiative recombination centers. Hysteresis loop showed the clear room temperature ferromagnetism in all the samples and the magnetization increased with Mn-doping. Better electrical and magnetic behavior of Zn_0.94Cu_0.04Mn_0.02O sample is suggested for effective opto-magnetic devices.     

Mg-N阴阳离子共掺杂SnO2的第一性原理研究

基于密度泛函理论,利用第一性原理计算Mg-N阴阳离子双受主共掺杂SnO₂的电子结构、电荷密度分布和缺陷形成能.Mg、N分别取代SnO₂晶体中的Sn和O,掺杂浓度分别为4.17at;、2.08at;,Mg-N键之间的共价性明显高于Sn-O键,富氧条件下,Mg-N共掺杂的缺陷形成能为2.67 eV,有利于进行有效的受主替代掺杂.Mg单受主掺杂SnO₂时,增加了带隙宽度,费米能级进入价带,Mg-N共掺杂SnO₂时,带隙窄化,表现出明显的p型导电类型.     

Highly N/O co-doped ultramicroporous carbons derived from nonporous metal-organic framework for high performance supercapacitors

A new nonporous Zn-based metal-organic framework (NPMOF) synthesized from a high nitrogen-containing rigid ligand was converted into porous carbon materials by direct carbonization without adding additional carbon sources. A series of NPMOF-derived porous carbons with very high N/O contents (24.1% for NPMOF-700, 20.2% for NPMOF-800, 15.1% for NPMOF-900) were prepared by adjusting the pyrolysis temperatures. The NPMOF-800 fabricated electrode exhibits a high capacitance of 220 F/g and extremely large surface area normalized capacitance of 57.7 μF/cm² compared to other reported MOF-derived porous carbon electrodes, which could be attributed to the abundant ultramicroporosity and high N/O co-doping. More importantly, symmetric supercapacitor assembled with the MOF-derived carbon manifests prominent stability, i.e., 99.1% capacitance retention after 10,000 cycles at 1.0 A/g. This simple preparation of MOF-derived porous carbon materials not only finds an application direction for a variety of porous or even nonporous MOFs, but also opens a way for the production of porous carbon materials for superior energy storage.     

Hydrothermal synthesis of (Fe,N) co-doped TiO<Subscript>2</Subscript> powders and their photocatalytic properties under visible light irradiation

(Fe, N) co-doped titanium dioxide powders have been prepared by a quick, low-temperature hydrothermal method using TiOSO₄, CO(NH₂)₂, Fe(NO₃)₃, and CN₃H₅ · HCl as starting materials. The synthesized powders were characterized by XRD, TEM, BET, XPS, and UV–Vis spectroscopy. Experimental results show that the as-synthesized TiO₂ powders are present as the anatase phase and that the N and Fe ions have been doped into the TiO₂ lattice. The specific surface area of the powders is 167.8 m²/g by the BET method and the mean grain size is about 11 nm, calculated by Scherrer’s formula. UV–Vis absorption spectra show that the edge of the photon absorption has been red-shifted up to 605 nm. The doped titanium dioxide powders had excellent photocatalytic activity during the process of photo-degradation of formaldehyde and some TVOC gases under visible light irradiation.     

氮、硫共掺杂的碳负载的钴@碳化钴:一种高效的非贵金属氧还原电催化剂

Development of high-efficiency and low-cost electrocatalysts for large-scale oxygen reduction reaction (ORR) remains a challenge. In this study, we employed melamine, trithiocyanuric acid, and cobaltous nitrate to fabricate a novel ORR electrocatalyst with cobalt and cobalt carbide supported on carbon co-doped with nitrogen and sulfur (hereafter referred to as MTC-0.1-900) by two-step pyrolysis. The MTC-0.1-900 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) specific surface area analysis, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance for ORR was investigated by cyclic voltammetry and linear sweep voltammetry in 0.1 mol·L^-1 KOH solutions. The results showed that the onset potential and half-wave potential of MTC-0.1-900 were 29 and 5 mV superior to the commercial Pt/C catalyst, respectively. After 12000 s operation at the potential of -0.3 V (vs Ag/AgCl), the current retention capacities of MTC-0.1-900 and Pt/C were 97.1% and 76.7%, respectively. MTC-0.1-900 also showed better methanol tolerance than Pt/C. These unique properties of MTC-0.1-900 provide us with an alternative for replacing or reducing the use of Pt catalyst in metal-air battery cathode materials.