Effect of strain on charge density wave order in α-U

The effect of strain on charge density wave (CDW) order in $\alpha$-U is investigated within the framework of relativistic density-functional theory. The energetical stability of $\alpha$-U with CDW distortion is enhanced by the tensile strain along $a$ and $b$ axes, which is similar to the case of negative pressure and normal. However, the tensile strain along $c$ axis suppresses the energetical stability of CDW phase. This abnormal effect could be understood from the emergence of a new one-dimensional atomic chain along $c$ axis in $\alpha$-U. Furthermore, this effect is supported by the calculations of Fermi surface and phonon mode, in which the topological objects and the dynamical instability show opposite behaviors between strains along $a$/$b$ and $c$ axes.     

Boussinesq方程行波解的存在性

利用平面动力系统方法的分支理论，研究了Boussinesq方程，通过对Boussinesq方程进行行波变换，得到了相应行波系统的首次积分和平衡点，给出了不同参数条件下的相图，证实了Boussinesq方程存在孤立波解和周期波解。     

Global existence to the initial–boundary value problem for a system of nonlinear diffusion and wave equations

We prove the global existence of weak solution pair to the initial boundary value problem for a system of m-Laplacian type diffusion equation and nonlinear wave equation. The interaction of two equations is given through nonlinear source terms $f(u,v)$ and $g(u,v)$.     

Particle manipulation via integration of electroosmotic flow of power-law fluids with standing surface acoustic waves (SSAW)

Standing surface acoustic wave (SSAW) based microfluidic devices have shown great promise toward fluid and particle manipulation applications in medicine, chemistry, and biotechnology. In this article, we present an analytical model for investigating continuous manipulation of particles (both synthetic and biological) within electroosmotic flow of non-Newtonian bio-fluids in a microfluidic channel under the influence of standing surface acoustic waves (SSAW). The particles are injected along the center of channel into the electroosmotically driven flow of power-law fluids, wherein their transport through the SSAW region is dictated by the hydrodynamic, electrophoretic, and acoustic forces. We first present a mathematical model to analyze the characteristics of electroosmotic flow of non-Newtonian power-law fluids in a hydrophobic slit microchannel. Next, we investigate the trajectories of particles in the flow field due to the combined effect of electroosmotic, electrophoretic, and acoustophoretic forcing mechanisms. The effect of key parameters such as particle size, their physical properties, input power, flow rate, and flow behavior index on the particle trajectories is examined while including the effect of the channel walls. The presented model delineates the methodologies of improving SSAW-based particle separation technology by considering the fluid rheology as well as the surface properties of the channel walls. Therefore, we believe that this model can serve as an efficient tool for device design and quick optimizations to explore novel applications concerning the integration of electroosmotic flows with acoustofluidic technologies.     

REBOUNDING OF GALILEAN CANNON FROM A RIGID WALL1)

研究了Galilean炮——即若干个直径递增的弹性球组成的球链---撞击刚性壁回弹的问题。采用三种力学模型：分离刚体的多次"弹性"碰撞、多刚体的接触碰撞、以及有限元模拟，对球链撞击问题进行了分析，旨在给出碰撞结束后末端小球的飞离速度与入射速度的比值。研究表明：球链碰撞反弹后将会散开，末端小球的飞离速度明显大于球链入射速度；当入射球链间存在间隙时，末端小球的速度增幅更加明显。通过实验展现了这种末端小球回弹速度增加的现象。     

货运动车组装载门凹陷对隧道内会车压力波的影响

随着我国技术经济水平的提高，电子商务产业快速发展，货运动车组应运而生。采用有限体积方法和重叠网格方法，以及SST k-ω高雷诺数湍流模型，数值模拟研究时速350 km的货运动车组在隧道内交会的压力波，探究货运动车组车体结构即装载门凹陷对隧道内交会压力波的影响。实车试验结果验证了本文数值模拟方法的准确性。研究结果表明，凹陷的装载门使平直车身处的最大正压值增大约20%~30%，且有无凹陷的装载门中心最大正压值的差异百分比维持在35%~80%，最大负压值差异百分比在20%~25%。     

浅水区海底管道周围海床渗透压力计算研究

我国海上油田开采起步较晚，大部分油田处于浅水区，因此，在设计管道时，应充分考虑由浅水区波浪引起的管道周围海床渗流力。根据浅水波相关假设，考虑自由水面非线性影响，推导出椭圆余弦波的波面方程，在此基础上进一步得到一个关于速度势的表达式，并根据该表达式得出作用于海床表面的波压公式。考虑海床土的压缩性，推导出一阶近似椭圆余弦波作用下浅水区埋置管道周围海床的渗流压力解析解，最后将计算结果与大型水槽试验及以往研究成果作对比。结果表明，在椭圆余弦波的作用下，由一阶椭圆余弦波理论得到的计算结果与试验结果规律基本一致，与相似工况下的现有理论成果数值基本相同，具有一定的可行性和工程价值。     

考虑剪切效应的旋转FGM楔形梁刚柔耦合动力学建模与仿真

本文对一类中心刚体-柔性梁系统在大范围转动下的刚柔耦合动力学问题进行了研究. 柔性梁为功能梯度材料(functionally graded materials, FGM)楔形变截面梁,材料体积分数在梁轴向呈幂律分布变化. 以弧长坐标来描述柔性FGM梁的几何位移关系,分别使用倾角和拉伸应变变量描述柔性梁的横向弯曲和纵向拉伸变形,并计及剪切效应. 采用假设模态法离散变形场,运用第二类拉格朗日方程进行方程推导,得到系统考虑剪切效应的刚柔耦合动力学模型. 基于全新的刚柔耦合动力学建模理论,研究不同轴向材料梯度分布的FGM楔形梁,通过数值仿真计算,分析讨论不同的转速、梯度分布规律以及变截面参数对系统动力学特性的影响. 结果表明,剪切效应对大高跨比的FGM楔形梁的变形影响较为明显,不容忽略;材料梯度分布规律和截面参数的选取均会对旋转FGM楔形梁的动力学响应和频率产生较大影响. 本文提出的考虑剪切效应的倾角刚柔耦合动力学模型是对以往非剪切模型的进一步完善,可应用于工程中的 Timoshenko梁结构的动力学问题求解.      

空化可压缩流动空穴溃灭激波特性研究

为深入研究空化可压缩流动中空泡/空泡团溃灭过程中激波产生、传播及其与空穴相互作用规律,本文采用数值模拟方法对空化可压缩流动空穴溃灭激波特性展开了研究.数值计算基于OpenFOAM开源程序,综合考虑蒸汽相和液相的压缩性,通过在原无相变两相可压缩求解器的控制方程中耦合模拟空化汽液相间质量交换的源项,实现了对空化流动的非定常可压缩计算.利用上述考虑汽/液相可压缩性的空化流动求解器,对周期性云状空化流动进行了数值模拟,并重点研究了空穴溃灭激波特性.结果表明:上述数值计算方法可以准确捕捉到空穴非定常演化过程及大尺度脱落空泡云团溃灭激波现象,大尺度脱落空泡云团溃灭过程分为3个阶段:(1) U型空泡团形成; (2) U型空泡团头部溃灭; (3) U型空泡团腿部溃灭.在U 型空泡团腿部溃灭瞬间,观察到激波产生,并向上游和下游传播,向上游传播的激波与空穴相互作用,导致水翼吸力面新生的附着型片状空穴回缩,直至完全溃灭.并且空穴溃灭激波存在回弹现象, 抑制了下一周期的空化发展.