Dynamic stability of a class of fractional-order nonlinear systems via fixed point theory

In this paper, the problem of the uniform stability for a class of fuzzy fractional-order genetic regulatory networks with random discrete delays, distributed delays, and parameter uncertainties is studied. Although there is a portion of literature on using fixed point theorems to study the stability of fractional neural networks, most of them required the fractional order to be in $\left(\frac{1}{2},1\right)$. However, the case of the fractional-order belonging to $(0,\frac{1}{2})$ has not been discussed. To solve it, this work proposes a novel idea of using fixed point theory to study the stability of fuzzy (0,1) order neural networks, the problem of the uniqueness of the solution of the considered genetic regulatory networks is resolved, and a novel sufficient condition to guarantee the uniform stability of above genetic regulatory networks is also derived. Eventually, an example is given to demonstrate that the obtained result is effective.     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

非线性玻尔兹曼方程的傅里叶谱方法

玻尔兹曼方程作为空气动理学中最基本的方程之一,是连接微观牛顿力学和宏观连续介质力学的重要桥梁.该方程描述了一个由大量粒子组成的复杂系统的非平衡态时间演化:除了基本的输运项,其最重要的特性是粒子间的相互碰撞由一个高维,非局部且非线性的积分算子来描述,从而给玻尔兹曼方程的数值求解带来非常大的挑战.在过去的二十年间,基于傅里叶级数的谱方法成为了数值求解玻尔兹曼方程的一种很受欢迎且有效的确定性算法.这主要归功于谱方法的高精度及它可以被快速傅里叶变换加速的特质.本文将回顾玻尔兹曼方程的傅里叶谱方法,具体包括方法的导出,稳定性和收敛性分析,快速算法,以及在一大类基于碰撞的空气动理学方程中的推广.     

Stability analysis of fractional order fuzzy cellular neural networks with leakage delay and time varying delays

In this paper we investigated the stability of fractional order fuzzy cellular neural networks with leakage delay and time varying delays. Based on Lyapunov theory and applying bounded techniques of fractional calculation, sufficient criterion are established to guarantee the stability. Hybrid feedback control is applied to derive the proposed results. Finally, numerical examples with simulation results are given to illustrate the effectiveness of the proposed method.     

峨山褐煤的分子结构和分子模拟

作为重要的化石能源，褐煤资源潜力巨大、分布广泛但综合利用率低。研究褐煤的分子结构模型，有助于预测褐煤在热解、液化和气化过程中的化学反应机理及反应路径，进而提高褐煤的综合应用水平。以云南峨山褐煤为研究对象，利用傅里叶变换红外光谱、13C核磁共振波谱及X射线光电子能谱等分析测试方法，获取了峨山褐煤的含碳、含氧及含氮结构参数。在此基础上，借助Gaussian 09计算平台，采用量子化学建模的方法构建并优化了峨山褐煤的分子结构模型。研究结果表明：峨山褐煤的芳碳率为39.20%，芳香碳结构主要为苯和萘，且芳香桥头碳与周边碳的比值χ_b为0.07；脂碳率为49.51%，脂肪碳结构主要为亚甲基，季碳和氧接脂碳；氧原子主要存在于羟基、醚氧、羰基和羧基结构中；含氮结构则以吡啶为主。基于元素分析、13C 核磁共振波谱分析，又经过热重实验消除褐煤中残余水分的影响后，计算出峨山褐煤的分子式为C₁₅₃H₁₃₇O₃₅N₂。依据分子式及分析结果计算出峨山褐煤的结构单元含量并构建出其初始结构模型，采用半经验法PM 3基组及密度泛函理论M06-2X/3-21G基组对初始分子构型进行优化。优化后的分子模型具有明显的三维立体特征，芳香环之间较为分散且在空间中排列不规则，芳香簇主要通过亚甲基、醚氧基、羰基、酯基和脂肪环连接，含氧官能团主要分布在分子边缘，脂肪族侧链较多。对优化后的分子模型进行振动频率计算进而获得了分子模型的模拟红外光谱，其与实验红外谱图吻合度良好，证明了峨山褐煤分子结构模型的准确性、合理性。分子结构模型的构建有利于直观地了解峨山褐煤的分子结构特征，从而有助于从微观分子角度研究峨山褐煤的宏观性质。同时，峨山褐煤分子结构模型可为其在热解、液化和气化等领域研究中提供理论指导。     

1,3,5-三(羧基甲氧基)苯镍配位聚合物的合成、晶体结构及性质研究

采用溶剂热法,1,3,5-三(羧基甲氧基)苯为定向配体和乙酸镍反应构筑了一个新型的金属配位聚合物[Ni(TB)₂(H₂O)₂]_n·2H₂O,其中H₃TB=1,3,5-三(羧基甲氧基)苯,通过元素分析、IR及X射线单晶衍射对配合物结构进行表征,并研究其荧光性质、热稳定性及Hirshfeld表面作用力。单晶结构分析表明,该配合物属于三斜晶系,空间群$P \overline{1}$,配合物中心离子Ni(Ⅱ)分别与来自两个水分子上的氧原子及四个不同1,3,5-三(羧基甲氧基)苯配体的羧酸氧原子配位,形成六配位的NiO₆八面体构型,并通过与1,3,5-三(羧基甲氧基)苯配体的氧原子配位不断延伸形成具有孔洞结构的一维链状构型。配合物具有良好的荧光性能和热稳定性。Hirshfeld表面作用分析表明配合物分子中O…H/H…O作用占主导且占比为39.0%,而H…H的作用力占比为25.9%,O…O的作用力占比为13.6%。     

Synthesis of flower-like WS2 by chemical vapor deposition

Flower-like tungsten disulfide (WS₂) with a diameter of 5-10 μm is prepared by chemical vapor deposition (CVD). Scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy are used to characterize its morphological and optical properties, and its growth mechanism is discussed. The key factors for the formation of flower-like WS₂ are determined. Firstly, the cooling process causes the generation of nucleation dislocations, and then the "leaf" growth of flower-like WS₂ is achieved by increasing the temperature.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.