声学超表面的非对称声分束特性研究

非对称声分束超表面是由人工微单元结构按照特定序列构建的二维平面结构,可将垂直入射的声波分成两束传播方向和分束比自由调控的透射波,在声功能器件设计及声通信领域具有广泛的应用前景。本文系统研究了一种实现非对称声分束的设计理论和实现方法,基于局域声功率守恒条件研究了声分束器的设计理论、阻抗矩阵分布、法向声强分布、声压场分布等。利用遗传算法对四串联共振腔结构进行参数优化实现了声分束器所需的阻抗矩阵分布,声压场分布表明声波入射到声分束器后在入射侧激发出两列传播方向相反且幅值和衰减系数均相同的表面波,实现了入射侧与透射侧的局域声功率相互匹配。声波经过声分束器后被分为两束透射波,两束透射波的折射角和透射系数与理论值十分吻合,证明了设计理论及实现方法的正确性和可行性。本文的研究工作可以为新型非对称声分束结构设计提供理论参考、设计方法和技术支持,并促进其在工程领域的实际应用。     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

Analogue Models of and for Gravity

Condensed matter systems, such as acoustics in flowing fluids, light in moving dielectrics, or quasiparticles in a moving superfluid, can be used to mimic aspects of general relativity. More precisely these systems (and others) provide experimentally accessible models of curved-space quantum field theory. As such they mimic kinematic aspects of general relativity, though typically they do not mimic the dynamics. Although these analogue models are thereby limited in their ability to duplicate all the effects of Einstein gravity they nevertheless are extremely important—they provide black hole analogues (some of which have already been seen experimentally) and lead to tests of basic principles of curved-space quantum field theory. Currently these tests are still in the realm of gedanken-experiments, but there are plausible candidate models that should lead to laboratory experiments in the not too distant future.     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

固体间界面的物理模型和界面对声波的反射

简要描述了模拟两固体间界面特性的弹簧模型，该模型最早是根据静力学方法提出的，后来用固体间界面薄层的声波反射方法加以改进，从界面弹簧模型可以方便地得到界面外近似边界条件，其中包含界面“弹簧”振子的劲度常数和质量，文章还给出了两相间固体中界面声反射系数的表达式，介绍了测量界面劲度常数的超声反射谱方法。最后讨论了仍关声波与界面相互作用研究领域中最近的一些研究进展。     

自聚焦透镜高效批量加工的双面研磨抛光法研究

依据双面研磨抛光原理，提出了加工自聚焦透镜平面和斜面辅助工装设计.从工艺技术特点和生产实际过程等方面对设计的工装使用情况进行分析验证.多次大批量加工实践证明，该辅助工装的设计完全满足了自聚焦透镜高效批量加工技术要求，简化整个生产线工艺，减少工艺流程时间，降低材辅料的消耗成本，从而验证了双面研磨抛光法是一种实用的加工自聚焦透镜的新方法.     

关于左手性介质几何光学的研究（一）

根据几何光学中的费马原理和完善成像原理研究了光线经过正负折射率界面时的传播特性，推导了单负折射率完善成像的曲面方程，讨论了单块负折射率透镜成像特性的一些缺陷及改进方案，依此指出了最短时间原理的适用范围的局限性和利用左手性介质制作光学器件的优越性，为进一步研究左手性介质的光学特性和相关光学器件设计提供了理论基础.     

方形自聚焦透镜的研制

经过方形玻璃丝的加工、离子交换及成品的精密加工等过程，成功制出了方形自聚焦透镜.并采用聚焦成像和雅明干涉等方法对其光学特性进行测试，得出了方形自聚焦透镜本身所具有的一些特性：中心部分畸变较小，成像性能好；四个棱角内的球差较大，像质较差;折射率分布不具有旋转对称性，而是与方向和半径有关.