The effect of triethyl citrate on the dispersibility and water vapor sorption behavior of polylactic acid/zeolite composites

The aim of this study was to investigate the water vapor adsorption behavior and mechanical properties of poly (lactic acid) (PLA)/zeolite (5, 10, or 15 phr) composites prepared with triethyl citrate (TEC; 20 phr) via a melting process. TEC was used to improve the flexibility of the PLA and the dispersibility of the zeolite in TEC-zeolite suspensions that were ultra-sonicated. It was found that zeolite was uniformly dispersed in the PLA matrix, and the interfacial adhesion between the PLA matrix and zeolite was enhanced by TEC. In addition, the tensile strengths and Young's modulus of the composites improved with increasing zeolite content. The PLA/zeolite composites prepared with TEC had increased water vapor permeability and contact angles compared to neat PLA and standard PLA/zeolite due to the presence of TEC. In particular, TEC accelerated the hydrolysis of the PLA surface in a high humidity environment, resulting in an improvement in water vapor sorption capacity. At the same zeolite content of 15 phr, the equilibrium moisture content (EMC) values of PLA/zeolite films prepared with TEC increased by up to 39.25 mg/g whereas those prepared without TEC only increased by up to 24.33 mg/g. The results suggest the possibility of applying PLA/zeolite films prepared with TEC as a flexible active packaging material.     

无溶剂热处理固相转化法简易制备沸石咪唑酯骨架材料

设计开发了一种无需溶剂，通过热处理固相转化制备沸石咪唑酯骨架材料（ZIFs）的简易方法.该方法无需溶剂及其它预处理，只需将金属源与有机配体固相混合后于低温（200℃）热处理即可实现多孔晶体材料的制备.所合成材料H-ZIF-67为具有方纳石拓扑结构的纳米晶体，与传统方式合成的ZIFs材料一致.粉末X射线衍射（PXRD）分析结果表明产物的晶体结构与标准ZIFs谱图一致.通过扫描电子显微镜（SEM）、透射电子显微镜（TEM）、N₂吸附-脱附分析、热重分析（TGA）和傅里叶变换红外光谱（FTIR）等手段对合成的材料进行了表征，发现H-ZIF-67材料具有与ZIFs材料类似的特性.该方法经济、高效，摒弃了传统方法合成ZIFs材料周期长、处理过程复杂的弊端，为ZIFs材料的量产提供了新思路.     

Effect of zeolite pore morphology on solvent-less alkylation of benzene with 1-hexene

In an attempt to convert the carcinogenic benzene which is almost restricted for its use in gasoline, alkylation reaction with olefin 1-hexene has been conducted on various zeolites. Four zeolites having different pore topology and pore size have been applied as solid acid catalysts for effective production of alkylate in a liquid phase, solvent-less low temperature reaction. The textural properties of all the four zeolites (ZSM-5, MOR, BEA, HY) have been characterized for crystal morphology by TEM, crystal structure by XRD and FTIR, BET for surface area, N₂ sorption for porosity and TPD for acidity. Among the zeolite, BEA possessed high surface area (600.61 m²/g) and enhanced meso pores volume (0.3956 cm³/g) as compared to other zeolite samples. The performance of BEA was also observed to be superior in the liquid phase alkylation of benzene with 1-hexene in a batch reactor under autogenous pressure without using any solvent. At the optimum reaction conditions, the benzene conversion was 86.6 wt% and 3-Phenylhexane, 2-Phenylhexane yield were about 47.9 wt% and 38.7 wt% respectively on this catalyst. The BEA also exhibited longer time-on-stream and reusability performance, thus offers an attractive route for converting benzene into valuable (3-Phenylhexane, 2-Phenylhexane) alkylate product useful for the manufacturing of fine chemicals, dyestuff, detergents and scents.     

Improvement in nanocomposite host (nanocavity of dealuminated zeolite Y)-guest (12-molybdophosphoric acid) catalytic activity and its application to the one-pot three-component synthesis of tetrahydrobenzo[b]pyrans

Zeolite Y was dealuminated by chemical methods (with ethylenediaminetetraacetic acid) to modify the zeolite structure for 12-molybdophosphoric acid (MPA) loading. MPA was encapsulated in the nanocavities of modified dealuminated zeolite Y (MDAZY) and characterized by Fourier transform infrared, X-ray diffraction, and atomic absorption spectroscopy. The new catalyst was applied for an efficient chemoselective synthesis of tetrahydrobenzo[b]pyran derivatives, and the corresponding products were obtained in good to excellent yields in very short reaction times. Furthermore, the catalytic activity of this new catalyst in the synthesis of tetrahydrobenzo[b]pyrans was compared with MPA encapsulated in zeolite Y dealuminated by the hydrothermal method. The catalyst (MPA–MDAZY) was recovered and reused several times without loss of its catalytic activity.     

Ferric Single-Site Catalyst Confined in a Zeolite Framework for Propane Dehydrogenation

Non-oxidative dehydrogenation of propane is a highly efficient approach for industrial preparation of propene that is commonly catalyzed by noble Pt or toxic Cr catalysts and suffers from coking. In this work, ferric catalyst confined in a zeolite framework was synthesized by a hydrothermal procedure. The isolated Fe in the framework formed distorted tetrahedra, which were beneficial for the selective dehydrogenation of propane and reached over 95 % propene selectivity and over 99 % total olefins selectivity. This catalyst had a silanol-free structure and was oxygen tolerant, hydrothermally stable, and coke free, with a deactivation constant of 0.01 h⁻¹. This study provided guidance for the synthesis of structural heteroatomic zeolite and efficient propane non-oxidative dehydrogenation over early transition metals.     

分子筛膜反应器的研究进展

分子筛膜具有规整的微孔结构(<1 nm), 耐高温高压、 抗有机溶剂, 在液相和气相小分子分离中受到广泛关注. 分子筛膜可以与催化反应耦合于一体构成膜反应器, 使反应过程与组分分离同时进行, 促进反应平衡移动, 达到反应强化的效果. 本文概述了近十年不同类型分子筛膜反应器在催化反应中的应用研究进展, 并对分子筛膜反应器未来的发展趋势进行了展望.     

Esterification of Oleic Acid to Produce Biodiesel over 12-Tungstophosphoric Acid Anchored Two-dimensional Zeolite

Biodiesel has emerged as a non-toxic, biodegradable, and renewable fuel substitute that can be readily produced via the esterification reaction of free fatty acids. The present work explores the potential of 12-tungstophosphoric acid(TPA) anchored two-dimensional(2D) ITQ-2 zeolite(TPA/ITQ-2) as heterogeneous acid catalysts for biodiesel production. TPA/ITQ-2 material was prepared by swelling, delamination, and subsequent wetness incipient impregnation approach. The prepared catalysts were comprehensively characterized by powder X-ray diffraction, N₂ adsorption/desorption, temperature-programmed desorption of ammonia, flou-rier transform infrared spectroscopy, and transmission electron microscopy. The catalytic activity of TPA/ITQ-2 for biodiesel production was evaluated by the esterification reaction of oleate acid with methanol. Process parameters, such as reactant molar ratio and TPA loading were optimized. Due to the superior mass transfer and adequate stable acid sites, 2D TPA/ITQ-2 showed a higher catalytic activity and a better recyclable stability than the 3D and layered TPA/zeolites. This work will provide new opportunities for the design of 2D zeolite-based acid catalysts for biodiesel production.     

Voltammetric Analysis of Oxymetazoline Hydrochloride at Zeolite – Modified Carbon Paste Electrode in Micellar Medium

Simple, sensitive, accurate and inexpensive differential pulse (DPV) and square wave (SWV) voltammetric methods utilizing zeolite modified carbon paste electrode (ZMCPE) were developed for the determination of Oxymetazoline hydrochloride (OXM) in nasal drops. Various experimental parameters were optimized using cyclic voltammetry (CV). Calibration curves were linear over the concentration ranges 9.8×10⁻⁸–3.6×10⁻⁶ M and 9.8×10⁻⁶–9×10⁻⁵ M for DPV and SWV, respectively. The DPV method showed a limit of detection (LOD) of 1.04×10⁻⁷ M. The method was applied for the determination of OXM in pharmaceutical formulation with an average recovery of 101.18 % (%RSD=0.41, n=9).     

Heterogeneous oxidation of cyclohexanone catalyzed by TS-1:Combined experimental and DFT studies

The reaction mechanism of the oxidation of cyclohexanone catalyzed by titanium silicate zeolite TS-1 using aqueous H2O2 as the oxidant was investigated by combining density function theory (DFT) calculations with experimental studies. DFT calculations showed that H2O2 was adsorbed and activated at the tetrahedral Ti sites. By taking into account the adsorption energy, molecular size, steric hindrance and structural information, a reaction mechanism of Baeyer-Villiger oxidation catalyzed by TS-1 that involves the activation of H2O2 was proposed. Experimental studies showed that the major products of cyclohexanone oxidation by H2O2 catalyzed by a hollow TS-1 zeolite wereε-carprolactone, 6-hydroxyhexanoic acid, and adipic acid. These products were analyzed by GC-MS and were in good agreement with the proposed mechanism. Our studies showed that the reaction mechanism on TS-1 zeolite was different from that on Sn-beta zeolite.     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).