The covalent functionalization of few-layered MoTe2 thin films with iodonium salts

Covalent functionalization of 2D materials provides a tailored approach towards tuning of their chemical, optical, and electronic properties making the search for new ways to graft small molecules important. Herein, the reaction with (3,5-bis(trifluoromethyl)phenyl)iodonium salt is revealed as an effective strategy for functionalization of MoTe₂ thin films. Upon decomposition of the salt, the generated radicals graft covalently as aryl-(CF₃)₂ groups at the surface of both metallic (1T’) and semiconducting (2H) polymorphs of MoTe₂. Remarkably, the reactivity of the salt is governed by the electronic structure of the given polymorph. While the functionalization of the metallic MoTe₂ occurs spontaneously, the semiconducting MoTe₂ requires activation by light. The reaction proceeds with the elimination of oxide from the original films yielding the functionalized products that remain protected in ambient conditions, presenting a viable solution to the ageing of MoTe₂ in air.     

Effect of sodium dodecyl sulfate on CO2 and H2S absorption enhancement of functionalized multiwall carbon nanotubes in water: Experimental study and empirical model

A single bubble absorption column was used to examine the effect of hydrodynamic on carbon dioxide (CO₂) and hydrogen sulfide (H₂S) absorption in pure water and water-based nanofluids dispersed with neat, and OH and NH₂ functionalized multiwall carbon nanotubes (MWCNTs). Sodium dodecyl sulfate (SDS) was used as a surfactant and stabilizer. The maximum absorption of CO₂ and H₂S were found to be 0.0038 mmol/m²·s and 0.056 mmol/m²·s using NH₂-MWCNTs /nanofluid with 0.5 wt% content, respectively. The diffusion coefficients of gases into the nanofluids were computed by using an equation attained based on Dankwert’s theory. A last, an empirical correlation was proposed to determine the Sherwood number for the absorption of the aforementioned gases into the nanofluids.     

Highly sensitive perylene tetra-(alkoxycarbonyl) based colorimetric and ratiometric probes for fluorine detection

Fluoride anion (F^?) affects environmental, biological, and chemical processes significantly. Therefore, its detection has received increasing attention, and sensitive, effective, and convenient probes for F^? detection need to be developed urgently. In this work, two perylene tetra-(alkoxycarbonyl) (PTAC) based colorimetric and ratiometric probes, P1 and P2, were developed for the detection of F^?. The interactions between F^? and these two probes were investigated by absorption, electrochemistry, ¹H NMR, and density functional methods. Both the two probes were complexed with F^? with a ratio of 1:1. The detection limits of P1 and P2 were 0.22 μM and 0.87 μM, respectively. It was worth noting that the absorption peak of P1 showed a 190 nm red shift when sensing F^?, and P1 is the largest red shift value reported in F^? probes based on PTAC derivatives. This phenomenon was resulted from the unique configuration and deprotonation of P1 that can promote the intramolecular charge transfer (ICT). This strategy provides an example for the development of other ion probes based on D-A type ICT mechanism.     

氨基酸官能团的太赫兹振动模式研究

对比于氨基酸的红外分析法,太赫兹波的电子能量更低,可实现无损检测。氨基酸分子内原子振动、分子间氢键的作用、以及晶体中晶格的低频振动均处于太赫兹波段,使其在太赫兹波段具有吸收峰,且不同的氨基酸分子太赫兹吸收峰不同,故可用氨基酸在太赫兹波段的这种“指纹特性”实现氨基酸类物质的定性分析。量子化学分析方法可以应用量子力学的基本原理和方法,研究稳定和不稳定分子的结构、性能及其之间的关系,还可以针对分子与分子间的相互作用、相互碰撞及相互反应等问题进行研究。通过量子化学计算方法计算氨基酸分子的太赫兹吸收谱,可以为氨基酸分子的太赫兹吸收峰匹配分子振动模式,对氨基酸定性分析有一定参考性与指向性,并为实验获取的样品太赫兹时域光谱提供理论支撑,在实验获得太赫兹吸收谱的基础上进行量子化学计算,还能为实验结果进行验证。首先利用太赫兹时域光谱技术获取了谷氨酰胺、苏氨酸、组氨酸的太赫兹吸收谱,分别构建这三种氨基酸样品在实物中以两性离子形式存在的单分子构型,利用量子化学计算方法在完成结构优化后进行太赫兹吸收谱模拟计算。计算结果表明三种氨基酸单分子的太赫兹吸收谱计算结果与实验获取的太赫兹吸收谱差异较大,但在高频段吸收峰峰位基本吻合。通过GaussView分别查看了这三种氨基酸分子在太赫兹段内的吸收峰对应频率处的振转情况,发现在高频段内三种氨基酸分子官能团均只发生转动而未见振动,并且转动模式基本一致。通过对氨基酸官能团的太赫兹吸收谱进行量子化学计算,将官能团在高频段内吸收峰对应频率处的振转模式与三种氨基酸分子在该段内吸收峰对应频率处的振转模式做了对比。研究表明,在氨基酸单分子构型下由量子化学方法计算所得的太赫兹吸收谱中,高频段内计算得出的模拟吸收峰与实验获取的太赫兹吸收峰基本吻合;振转模式分析发现,谷氨酰胺、苏氨酸、组氨酸在太赫兹高频段内的氨基酸官能团振转模式相同,三种氨基酸分子在高频段内的吸收峰主要来源于氨基酸官能团。因此,结合量子化学计算与太赫兹吸收谱可以实现氨基酸类物质的定性分析。     

无绝缘高温超导双饼线圈的瞬态电热特性分析

无绝缘高温超导线圈具有良好的电热稳定性和机械紧凑性,但其充电过程中却有明显的磁场延迟现象。为详细了解无绝缘高温超导线圈励磁过程的瞬态特性,建立了无绝缘高温超导线圈的同轴圆环等效电路模型。通过绕制一个670匝的无绝缘高温超导双饼线圈,在液氮温度下进行不同充电速率的励磁实验,初步验证了等效电路模型的正确性。基于该模型,针对线圈励磁过程的充电和恒流阶段,仿真得到了线圈各匝的径向电流分布规律和电热损耗特性。     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。     

基于吸收系数的生脉注射液中聚山梨酯80含量测定新方法

聚山梨酯80又名吐温80，为一种亲水型非离子表面活性剂，是食品、保健品和药品中常用的辅料，作为增溶剂和澄清剂广泛用于中药注射剂。近年来，不良反应的发生使得聚山梨酯80的质量和应用愈加受到重视，有研究认为其加入可能引起注射剂不良反应增加。为避免超量使用，有必要对该辅料的投料加以严格控制。中药注射剂中聚山梨酯80的含量测定是当下研究的热点和难点，可以通过分光光度法、分子排阻-蒸发光散射检测法(SEC-ELSD)、液质联用法(LC-MS)直接测定，也可以水解后法经液相色谱-紫外检测法(HPLC-UV)或气相色谱法(GC)间接测定。但由于聚山梨酯80为聚氧乙烯聚合数目不同的混合物、不同厂家生产的聚山梨酯80化学组分及比例存在较大差异，难以采用统一的转换公式或对照品准确定量。此外，中药注射剂的复杂基质造成的假阳性干扰也对定量提出了挑战。为解决以上问题，以生脉注射液为例，提出基于吸收系数的中药注射剂中聚山梨酯80含量测定新方法。优化检测波长、显色剂种类、液液萃取过程振荡和静置时间，在6个不同品牌仪器上测得聚山梨酯80-硫氰酸钴配合物的吸收系数(E1%_{1 cm})为104.23，相对标准偏差(RSD)为2.08%。生脉注射液稀释10倍后，精密量取供试品溶液1.0 mL，精密加入硫氰酸钴溶液10 mL，二氯甲烷20 mL，涡旋振荡3 min。将混合液移至分液漏斗中，静置30 min，取下层二氯甲烷液，将前1 mL弃去，接收约15 mL，在320 nm处测定吸光度，再根据Lambert-Beer定律，利用获得的吸收系数计算得到聚山梨酯80的含量。方法阴性无干扰，精密度和重复性相对标准偏差均低于3%，平均回收率为98.42%。为进一步验证方法的准确性，分别采用吸收系数法和标准曲线法测定了2个厂家的10批生脉注射液，并与实际投料量比较。配对t检验结果表明，当置信度为95%时，两种方法无显著性差异，吸收系数法测得结果与企业生产中聚山梨酯的实际投料量也无显著性差异。研究采用前人未采用的、灵敏度更高的320 nm为检测波长，显著降低了基质干扰，克服了中药注射剂中聚山梨酯80测定结果与实际投料量难以吻合的问题。吸收系数法无需使用对照品，亦不用制备标准曲线，可为中药注射剂中聚山梨酯80的检查标准提供切实可行的解决方案。所建方法灵敏、准确、快速、简便，为含聚山梨酯80制剂的质量控制提供了关键常数及新的思路。     

焦炉上升管内壁结焦炭层的光谱学分析及结焦机理研究

以焦炉上升管内壁结焦炭层块为研究对象，采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）、傅里叶红外光谱仪（FTIR）和激光共聚焦拉曼光谱仪（Raman）对结焦炭层的元素组成，以及各结焦炭层的矿物组成、组成结构和分子结构进行测试。分析从结焦炭层块外表面向内表面过渡的各结焦炭层的差异性，揭示焦炉上升管内壁结焦机理。结果表明焦炉上升管内粉尘中Fe，S和Cr极易催化荒煤气中蒽、萘等稠环芳烃化合物成炭，在焦炉上升管内壁形成炭颗粒沉积，为焦油凝结挂壁提供载体，在荒煤气温度降至结焦温度时易结焦积碳。结焦炭层均含有芳香层结构，随着结焦炭层从外表面向内表面过渡，各结焦炭层的面层间距(d₀₀₂)逐渐降低、层片直径(L_a)先降低后增加、层片堆砌高度(Lc)和芳香层数(N)先稳定后增加。结焦炭层石墨化过程是由结焦炭层内表面向外表面进行，主要包括其片层外缘的羧基和部分C-O结构的降解剥离，从而形成高度规整的共轭结构。结焦炭层块中C元素是以结晶碳与无定型碳的混合物形式存在。以上研究为解决焦炉上升管内壁结焦及腐蚀问题，提高换热器换热效率，有效回收焦炉荒煤气显热，降低焦化企业能耗提供实验基础和理论依据。     

Synthesis,spectroscopic studies,thermal analyses,biological activity of tridentate-coordinated transition-metal complexes [M(L)X2] and crystal structure of [ZnBr2(2,6-bis(tert-butylthiomethyl)pyridine)]

A new terdentate acyclic pincer ligand, 2,6-bis(tert-butylthiomethyl)pyridine (tbtmp), was synthesized and reacted with several complexes of iron, zinc, nickel, cobalt, and copper. The ligand and its coordination compounds were characterized using elemental analysis, infrared, ¹H- and ¹³C-NMR-spectroscopy, thermal analyses, plus—for the Zn complex—single-crystal X-ray diffractometry. The structure of [Zn(L)Br₂] was solved in the tetragonal crystal system, chiral space groups P4₁2₁2 and P4₃2₁2 (No. 92 and No. 96, a = 947.2(1) pm, c = 2265.2(5) pm), revealing five-fold coordination of the metal atoms. According to spectroscopy, all complexes share the same coordination environment around the metal atoms, consisting of two halide anions and a sulfur-methylene-pyridine-methylene-sulfur entity; tbtmp acts as a tridentate ligand with the pyridine N atom and both tert-butylthio S atoms coordinating to the metal ions (NS2). The analysis results indicate that the metal ions are coordinated as distorted pseudo-bipyramids, LMX₂, with the chelate ligand meridionally arranged. One of the complexes contains ethanol as an additional ligand, resulting in a pseudo-octahedral coordination sphere [Ni(L)Cl₂EtOH]. The latter was obtained in the form of green crystals, which turn into a red powder with loss of the ethanol molecule. Fe (III), Co(II), Ni(II) and Cu(II) metal complexes [M(L)Cl₂] were screened for their antibacterial activity against B. subtilis G(+) and Escherichia coli G(−) bacteria, and fungus (Candida albicans and Aspergillus flavus).