Accurate theoretical prediction of optical properties of BODIPY dyes

Boron-dipyrromethene dyes (BODIPY) are of great interest nowadays mostly due to their valuable optical properties. Nevertheless, no systematic research of the optical property dependence on the structure of dyes has been performed yet. In this work, analysis of the available quantum-chemical methods for BODIPY optical property calculations has been carried out. The accuracy of eight DFT functionals has been studied. The solvation effects upon excitation have been considered within two schemes. The methods that predict the absorption and emission spectra of BODIPY derivatives with high accuracy have been proposed. Using the suggested methods, the influence of nature of substituents and their position in the BODIPY core on the optical spectra of the dyes has been studied. A complex pattern of red- and blue-shifts in optical spectra in dependence of nature and position of substituents has been revealed. The results of this work provide the way for efficient design of BODIPY derivatives with desired optical properties.     

Excited-State Dynamics of Thienoguanosine,an Isomorphic Highly Fluorescent Analogue of Guanosine

Thienoguanosine (^thG) is an isomorphic analogue of guanosine with promising potentialities as fluorescent DNA label. As a free probe in protic solvents, ^thG exists in two tautomeric forms, identified as the H1, being the only one observed in nonprotic solvents, and H3 keto–amino tautomers. We herein investigate the photophysics of ^thG in solvents of different polarity, from water to dioxane, by combining time-resolved fluorescence with PCM/TD-DFT and CASSCF calculations. Fluorescence lifetimes of 14.5–20.5 and 7–13 ns were observed for the H1 and H3 tautomers, respectively, in the tested solvents. In methanol and ethanol, an additional fluorescent decay lifetime (≈3 ns) at the blue emission side (λ≈430 nm) as well as a 0.5 ns component with negative amplitude at the red edge of the spectrum, typical of an excited-state reaction, were observed. Our computational analysis explains the solvent effects observed on the tautomeric equilibrium. The main radiative and nonradiative deactivation routes have been mapped by PCM/TD-DFT calculations in solution and CASSCF in the gas phase. The most easily accessible conical intersection, involving an out-of plane motion of the sulfur atom in the five-membered ring of ^thG, is separated by a sizeable energy barrier (≥0.4 eV) from the minimum of the spectroscopic state, which explains the large experimental fluorescence quantum yield.     

Heteroleptic [Cu(NN)P2]+-type cuprous complexes and their structural modulation on phosphorescent color: Synthesis,structural characterization,properties, and theoretical calculations

Four new heteroleptic [Cu(NN)P₂]⁺-type cuprous complexes— 1 -TPP, 2 -POP, 3 -Xantphos, and 4 -DPPF—were designed and synthesized using a diimine ligand 2-(2′-pyridyl)benzoxazole (2-PBO) and different phosphine ligands (TPP, triphenylphosphine; POP, bis[2-(diphenylphosphino)phenyl]ether; Xantphos, 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene; DPPF, 1,1′-bis(diphenylphosphino)-ferrocene). All complexes were characterized using single-crystal X-ray diffraction, spectroscopic analysis (infrared, UV–Vis.), elemental analysis, and photoluminescence (PL). Single-crystal X-ray diffraction revealed complexes 1 – 4 as isolated cation complex structures with a tetrahedral CuN₂P₂ coordination geometry and diverse P–Cu–P angles. Their UV–Vis. absorption spectra exhibited a blue-shift sequence in wavelength with an enlarged P–Cu–P angle from 4 to 2 then to 3 and then to 1 . The PL emission peaks of 1 – 3 also exhibited a similar blue-shift sequence ( 2 → 3 → 1 ). Their PL lifetime in microseconds (~7.5, 5.1, and 4.7 μs for 1 , 2 , and 3 , respectively) indicated that their PL behavior represents phosphorescence. Time-dependent density functional theory (TD-DFT) calculation and wavefunction analysis revealed that S₁ and T₁ states of 1 – 3 should be assigned as metal–ligand and ligand–ligand charge-transfer (ML + L'L)CT states. Their UV–Vis. absorption and phosphorescence should be attributed to the charge transfer from the P–Cu–P segment to the 2-PBO ligand. Therefore, as the P–Cu–P angle increased (lower HOMO), the energy of S₁ and T₁ states also increased, following the change of PL color.     

Enhancing the Viscosity-Sensitive Range of a BODIPY Molecular Rotor by Two Orders of Magnitude

Molecular rotors are a class of fluorophores that enable convenient imaging of viscosity inside microscopic samples such as lipid vesicles or live cells. Currently, rotor compounds containing a boron-dipyrromethene (BODIPY) group are among the most promising viscosity probes. In this work, it is reported that by adding heavy-electron-withdrawing −NO₂ groups, the viscosity-sensitive range of a BODIPY probe is drastically expanded from 5–1500 cP to 0.5–50 000 cP. The improved range makes it, to our knowledge, the first hydrophobic molecular rotor applicable not only at moderate viscosities but also for viscosity measurements in highly viscous samples. Furthermore, the photophysical mechanism of the BODIPY molecular rotors under study has been determined by performing quantum chemical calculations and transient absorption experiments. This mechanism demonstrates how BODIPY molecular rotors work in general, why the −NO₂ group causes such an improvement, and why BODIPY molecular rotors suffer from undesirable sensitivity to temperature. Overall, besides reporting a viscosity probe with remarkable properties, the results obtained expand the general understanding of molecular rotors and show a way to use the knowledge of their molecular action mechanism for augmenting their viscosity-sensing properties.     

Dual Chromophoric Meso-Aryl BODIPYs with Aggregation Induced Red-Emission Characteristics: Optical Properties and their Application in Fe3+ Detection

Herein, we report the design of meso-aryl BODIPYs as a structural motif for aggregation-caused quenching (ACQ) to aggregation-induced emission (AIE) transformation. A series of meso-aryl BODIPY derivatives were synthesized, by systematically increasing the size of the chromophore at the meso-position from phenyl to pyrene. The effect of various factors, such as the aryl ring size, solvents, viscosity, and metal cations, on the photophysical properties was analyzed. The emission properties are well correlated with the flexibility of the aromatic ring for free rotation around the C_aryl−C_BODIPY bond. Accordingly, meso-phenanthrene BODIPY ( PhB ) has the highest emission characteristics. The emission property of less bulky aryl-substituted BODIPYs increases by increasing the solvent viscosity. The interaction of Fe³⁺ ions with aryl-BODIPYs provides a prominent photophysical response based on Lewis-acid supported decomplexation of BF₂ in aryl-BODIPYs. The bichromophoric meso-aryl BODIPYs exhibit notable intramolecular excitation energy transfer from the aromatic ring to the BODIPY core, which is higher in meso-anthracene BODIPY( AB ). Hence, decorating BODIPYs with polycyclic aromatic systems generates a twisted structure, which inhibits the π-π stacking between the planar aromatic molecules. This can be proposed as an effective approach at the molecular level to convert planar aryl luminophores having ACQ to AIEgens. Besides, the meso-pyrene BODIPY derivative shows excellent mechanofluorochromic behaviour.     

Theoretical investigation on quinoline-based platinum (II) complexes as efficient singlet oxygen photosensitizers in photodynamic therapy

Geometry optimizations of the quinoline-based platinum (II) complexes (1-R, 2-R) and their related calculations on excited state energies, electronic absorption spectra and orbital populations have been carried out by the hybrid density functional theory (DFT) and its time-dependent approach (TD-DFT). The solvent effects on excitation energies are taken into account using the conductor-like polarizable continuum model (C-PCM). The red-shifted level of absorption bands, energy gaps between the singlet ground state (S₁) and the first triplet excited state (T₁) for each examined complex have been elaborated thoroughly as well. We find that the quinoline-8-thoil (ligand 2) induces much more significant red-shifted level than 8-hydroxyquinoline (ligand 1), and singlet-triplet splitting energy gaps of all examined complexes are bigger than threshold energy to yield singlet oxygen. It is revealed that the electronic red-shifted absorption bands originate from metal-to-ligand charge transfer (MLCT) transitions, and also shown that the quinoline-based Pt (II) complexes with strong donor groups could be considered as potential candidates for unearthing of novel photosensitizers in photodynamic therapy (PDT).     

染料敏化太阳能电池中具有不同电子给体的吩噻嗪类有机光敏染科的理论研究

采用密度泛函理论和含时密度泛函理论方法计算了2个吩噻嗪类染料及其吸附到TiO2上后分子的基态和激发态光物理性质与热力学参数.结果表明,电子给体的改变虽未明显改变染料的光谱性质(垂直跃迁能和振子强度),但可以改变分子的前线轨道能级,进而影响染料分子的激子结合能Eb及激发态电子注入到半导体TiO2中的驱动力△Gint的大小...     

Radiative decay channel assessment to understand the sensing mechanism of a fluorescent turn-on Al3+ chemosensor

The turn-on luminescent chemosensor [2-Hydroxy-1-naphthaldehyde-(2-pyridyl) hydrazone] (L), selective to Al³⁺ ions, was studied by means of density functional theory (DFT) and time-dependent-DFT quantum mechanics calculations. The UV-Vis absorption and the radiative channel from the adiabatic S₁ excited state were assessed in order to elucidate the selective sensing mechanism of L to Al³⁺ ions. We found that twisted intramolecular charge transfer (TICT) and photoelectron transfer (PET), which alter the emissive state, are responsible for the luminescence quenching in L. After coordination with Al³⁺, the TICT is blocked, and PET is no longer possible. So, the emission of the coordination complex is activated, and a fluorescence effect enhanced by chelation is observed. For compounds with Zn²⁺ and Cd²⁺, the luminescence quenching is caused by PET, while for Ni²⁺, ligand to metal charge transfer is the prominent mechanism. To go into more detail, the metal-ligand interaction was analyzed via the Morokuma-Ziegler energy decomposition scheme and the natural orbital of chemical valence.     

Hammett and Brown correlations in the structure and electronic properties of H2Si=SiHAr (Ar = p-C6H4X; X = NH2, OH,Me, H,F, Cl,CHO, COOH,CN, NO2) molecules

Substituent effect on the structure and electronic properties of H₂Si=SiHAr (Ar = p-C₆H₄X; X = NH₂, OH, Me, H, F, Cl, CHO, COOH, CN, NO₂) molecules are studied at the CAM-B3LYP/6-311G(d,p) level of theory. Energy decomposition analysis (EDA) is used as a useful tool for illustrating the interaction between H₂Si and SiHAr fragments in HArSi=SiH₂ molecules. Energetic analysis reveals that the singlet state of the fragments is more stable than triplet state. Also, interactions are stronger in the presence of electron-withdrawing groups (EWGs) in comparison to electron donating groups (EDGs). EDG and EDG effects are investigated on the stability of fragments, frontier orbital energy, distortion, HOMO–LUMO gap, electron-donating (ω⁻) and electron-accepting (ω⁺) powers of the studied molecules. Then, the correlations between these calculated parameters with the Hammett and Brown constants (σ_p and σ_p⁺, respectively) are provided. Also, time-dependent density functional theory method (TD-DFT) is employed for the determination of the strongest absorption band values (λ_max,el) of these molecules. This absorption band is attributed to the HOMO →LUMO transition.     

A green-emitting α-substituted β-diketonate Tb3+ phosphor for ultraviolet LED-based solid-state lighting

The α-substituted β-diketonate [Ln(3Cl-acac)₃(H₂O)₂] [Ln = Tb, Gd] complexes (with 3Cl-acac^– being 3-chloro-2,4-pentanedionate) were characterized by elemental analysis, infrared, ultraviolet (UV)-visible and photoluminescence spectroscopies. For comparison purposes regarding photoluminescence, the well-known [Tb(acac)₃(H₂O)₂] complex was also synthesized. By considering the phosphorescence spectra of [Gd(3Cl-acac)₃(H₂O)₂], the effect of chloride replacement of hydrogen on the triplet state energy of the 3Cl-acac ligand was revealed. To support the interpretation and rationalization of the experimental results, Time-dependent DFT calculations were performed on Tb(3Cl-acac)₃(H₂O)₂. Additionally, the possibility of Tb(3Cl-acac)₃(H₂O)₂ to be used as potential green-emitting phosphor material for solid-sate light emitting diodes was evaluated. A prototype was successfully fabricated coating a near-UV LED (370 nm) with the Tb(3Cl-acac)₃(H₂O)₂ complex.