Swelling and Drying Mechanisms of Freeze-Thawed Polyvinyl Alcohol/Egg White/Montmorillonite Bionanocomposite Hydrogels

Abstract

Polyvinyl alcohol and egg white bionanocomposite hydrogels loaded with montmorillonite clay were fabricated by a freezing-thawing technique. The bionanocomposite hydrogels showed an exfoliated morphology and they had a more interconnected and dense network as compared with the clay-free sample. The montmorillonite layers acted as multifunctional crosslinkers and the bionanocomposite hydrogels had nanoscale, slit-shaped pores. The swelling ratios of the bionanocomposite hydrogels were increased either by decreasing the content of incorporated montmorillonite or by increasing the pH of the swelling medium. It was found that the bionanocomposite hydrogels having a higher content of montmorillonite exhibited a slightly slower drying process with a longer drying duration. Using the Ritger-Peppas model, it was shown that the swelling and drying mechanisms for all bionanocomposite hydrogels were non-Fickian diffusion. According to the Peppas-Sahlin model, it was found that the absorption of the swelling agent molecules during the swelling process and also the removal of water molecules during the drying process in the early stages of the processes occurred mostly due to their diffusion. At higher swelling or drying times, the contribution of the relaxation (for swelling) and shrinkage (for drying) of the polyvinyl alcohol polymeric chains and egg white protein chains was increased.     

Sustainable Drying and Torrefaction Processes of Miscanthus for Use as a Pelletized Solid Biofuel and Biocarbon-Carrier for Fertilizers

Miscanthus is resistant to dry, frosty winters in Poland and most European Union countries. Miscanthus gives higher yields compared to native species. Farmers can produce Miscanthus pellets after drying it for their own heating purposes. From the third year, the most efficient plant development begins, resulting in a yield of 25–30 tons of dry matter from an area of 1 hectare. Laboratory scale tests were carried out on the processes of drying, compacting, and torrefaction of this biomass type. The analysis of the drying process was conducted at three temperature levels of the drying agent (60, 100, and 140 °C). Compaction on a hydraulic press was carried out in the pressure range characteristic of a pressure agglomeration (130.8–457.8 MPa) at different moisture contents of the raw material (0.5% and 10%). The main interest in this part was to assess the influence of drying temperature, moisture content, and compaction pressure on the specific densities (DE) and the mechanical durability of the pellets (DU). In the next step, laboratory analyses of the torrefaction process were carried out, initially using the Thermogravimetric Analysis TGA and Differential Scaning Calorimeter DSC techniques (to assess activation energy (EA)), followed by a flow reactor operating at five temperature levels (225, 250, 275, 300, and 525 °C). A SEM analysis of Miscanthus after torrefaction processes at three different temperatures was performed. Both the parameters of biochar (proximate and ultimate analysis) and the quality of the torgas (volatile organic content (VOC)) were analyzed. The results show that both drying temperature and moisture level will affect the quality of the pellets. Analysis of the torrefaction process shows clearly that the optimum process temperature would be around 300–340 °C from a mass loss ratio and economical perspective.     

Deposition pattern of drying droplets

The drying of liquid droplets is a common daily life phenomenon that has long held a special interest in scientific research. When the droplet includes nonvolatile solutes, the evaporation of the solvent induces rich deposition patterns of solutes on the substrate. Understanding the formation mechanism of these patterns has important ramifications for technical applications,ranging from coating to inkjet printing to disease detection. This topical review addresses the development of physical understanding of tailoring the specific ring-like deposition patterns of drying droplets. We start with a brief introduction of the experimental techniques that are developed to control these patterns of sessile droplets. We then summarize the development of the corresponding theory. Particular attention herein is focused on advances and issues related to applying the Onsager variational principle (OVP) theory to the study of the deposition patterns of drying droplets. The main obstacle to conventional theory is the requirement of complex numerical solutions, but fortunately there has been recent groundbreaking progress due to the OVP theory. The advantage of the OVP theory is that it can be used as an approximation tool to reduce the high-order conventional hydrodynamic equations to first-order evolution equations,facilitating the analysis of soft matter dynamic problems. As such, OVP theory is now well poised to become a theory of choice for predicting deposition patterns of drying droplets.     

UHMWPE纤维的超临界CO_2辅助渗透预处理研究

利用Minitab软件设计实验,以超高分子量聚乙烯纤维(UHMWPE)为原料,研究了在不同的超临界CO_2流体状态下,处理压力、温度和时间等因素对三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)渗入率的影响,确定了最佳因素设置范围;通过单因子实验优化了超临界CO_2处理工艺,并对经过电子束辐照的UHMWPE纤维凝胶含量和蠕变率进行了测试。研究结果表明:处理温度对TMPTMA的渗入率影响最大,其次为压力,时间的影响最小,确定了最优工艺条件为处理压力25MPa,温度80℃,时间30min;TMPTMA渗入率越高,电子束辐照后UHMWPE纤维的增感辐照交联效应和抗蠕变效果越好。     

Identification,quantification and Chrastil modelling of wheat straw wax extraction using supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) can be used as a “green” selective solvent for extractions of wheat straw waxes. For the first time, the crude extraction yields of wheat straw waxes and the yields of a single high value group of components (wax esters) using various scCO₂ conditions (305.15 to 373.15 K and 7.5 to 40 MPa) have been modelled using the Chrastil equation (Chrastil, 1982). The model accurately predicts both the crude yield and percentage of valuable wax esters within the extracts enabling maximum extraction efficiency. The key compounds within the waxes (fatty acids, sterols, fatty alcohols, wax esters, β-diketones and alkanes) have been identified and quantified. This study highlighted that, 14,16 hentriacontanedione was extracted at critical temperature and pressure in concentrations of 1000 μg.g⁻¹ straw. This molecule could demonstrate significant potential as a natural chelate for metal recovery and also in the formation of super-hydrophobic coatings.     

Pushing the speed limit in enantioselective supercritical fluid chromatography

Chromatographic enantioseparations on the order of a few seconds can be achieved by supercritical fluid chromatography using short columns packed with chiral stationary phases. The evolution of ‘world record’ speeds for the chromatographic separation of enantiomers has steadily dropped from an industry standard of 20–40 min just two decades ago, to a current ability to perform many enantioseparations in well under a minute. Improvements in instrument and column technologies enabled this revolution, but the ability to predict optimal separation time from an initial method development screening assay using the t_{min cc} predictor greatly simplifies the development and optimization of high‐speed chiral chromatographic separations. In this study, we illustrate how the use of this simple tool in combination with the workhorse technique of supercritical fluid chromatography on customized short chiral columns (1–2 cm length) allows us to achieve ultrafast enantioseparations of pharmaceutically relevant compounds on the 5–20 s scale, bringing the technique of high‐throughput enantiopurity analysis out of the specialist realm and into the laboratories of most researchers.     

Coating properties of a novel water stationary phase in capillary supercritical fluid chromatography

The coating properties of a novel water stationary phase used in capillary supercritical fluid chromatography were investigated. The findings confirm that increasing the length or internal diameter of the type 316 stainless‐steel column used provides a linear increase in the volume of stationary phase present. Under normal operating conditions, results indicate that about 4.9 ± 0.5 μL/m of water phase is deposited uniformly inside of a typical 250 μm internal diameter 316 stainless‐steel column, which translates to an area coverage of about 6.3 ± 0.5 nL/mm² regardless of dimension. Efforts to increase the stationary phase volume present showed that etching the stainless‐steel capillary wall using hydrofluoric acid was very effective for this. For instance, after five etching cycles, this volume doubled inside of both the type 304 and the type 316 stainless‐steel columns examined. This in turn doubled analyte retention, while maintaining good peak shape and column efficiency. Overall, 316 stainless‐steel columns were more resistant to etching than 304 stainless‐steel columns. Results indicate that this approach could be useful to employ as a means of controlling the volume of water stationary phase that can be established inside of the stainless‐steel columns used with this supercritical fluid chromatography technique.     

Quantification of 3‐n‐butylphthalide in beagle plasma samples by supercritical fluid chromatography with triple quadruple mass spectrometry and its application to an oral bioavailability study

A high‐throughput, rapid, sensitive, environmentally friendly, and economical supercritical fluid chromatography with triple quadruple mass spectrometry method was established and validated for the first time to determine a cerebral stroke treatment drug named 3‐n‐butylphthalide in dog plasma. Plasma samples were prepared by protein precipitation with methanol and the analytes were eluted on an ACQUITY UPC^2TM HSS‐C₁₈ SB column (3 × 100 mm, 1.8 μm) maintained at 50°C. The mobile phase comprised supercritical carbon dioxide/methanol (90:10, v/v) at a flow rate of 1.5 mL/min, the compensation solvent was methanol at a flow rate of 0.2 mL/min and the total run time was 1.5 min per sample. The detection was carried out on a tandem mass spectrometer with an electrospray ionization source. Calibration curves were linear over the concentration range of 1.02–1021.00 ng/mL (r² ≥ 0.993) with the lower limit of quantification of 1.02 ng/mL. The intra‐ and inter‐day precision values were below 15% and the accuracy was from 97.90 to 103.70% at all quality control levels. The method was suitable for a pharmacokinetic study of 3‐n‐butylphthalide in beagle dogs.     

Supercritical fluid chromatography with photodiode array detection for pesticide analysis in papaya and avocado samples

To improve the analysis of pesticides in complex food matrices with economic importance, alternative chromatographic techniques, such as supercritical fluid chromatography, can be used. Supercritical fluid chromatography has barely been applied for pesticide analysis in food matrices. In this paper, an analytical method using supercritical fluid chromatography coupled to a photodiode array detection has been established for the first time for the quantification of pesticides in papaya and avocado. The extraction of methyl parathion, atrazine, ametryn, carbofuran, and carbaryl was performed through the quick, easy, cheap, effective, rugged, and safe methodology. The method was validated using papaya and avocado samples. For papaya, the correlation coefficient values were higher than 0.99; limits of detection and quantification ranged from 130–380 and 220–640 μg/kg, respectively; recovery values ranged from 72.8–94.6%; precision was lower than 3%. For avocado, limit of detection values were ?450 μg/kg; precision was lower than 11%; recoveries ranged from 50.0–94.2%. Method feasibility was tested for lime, banana, mango, and melon samples. Our results demonstrate that the proposed method is applicable to methyl parathion, atrazine, ametryn, and carbaryl, toxics pesticides used worldwide. The methodology presented in this work could be applicable to other fruits.     

Rapid Preparation of Mesoporous Methylsilsesquioxane Aerogels by Microwave Heating Technology

Microwave heating technology is known as an alternative to traditional gas and electric heating sources. In this work, mesoporous methylsilsesquioxane (MSQ) aerogels were prepared via a sol–gel process accompanied by microwave heating technology, and microwave heating was used in the gelation of sol and the drying of wet gels, respectively. The effects of hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, hydrochloric acid (HCl) as a catalyst, ethanol as a solvent, sodium hydroxide (NaOH) as a gelation agent, and microwave power on the pore structure of as-prepared MSQ aerogels were investigated in detail. Microwave heating at low power results in the acceleration of sol–gel transition and achieves the gelation within a few minutes. Appropriate amounts of chemical reagents and microwave heating at high power allow the preparation of mesoporous MSQ aerogels with a BET-specific surface area of 681.6 m²·g⁻¹ and a mesopore size of 19 nm, and the resultant MSQ aerogel still has a BET specific surface area as high as 134 m²·g⁻¹ after heat treatment at 600 °C for 2 h, showing high thermal stability. The MSQ aerogels/fibre composite possesses a low thermal conductivity of 0.039 W/(m·k)⁻¹, displaying good thermal insulation. Microwave heating technology is a promising heating method for the preparation of other aerogels.