On the numerical solution of nonplanar dust-acoustic super rogue waves in a strongly coupled dusty plasma

The occurrence of cylindrical and spherical low-frequency dust-acoustic freak waves (DAFWs) in a strongly coupled dusty plasma is numerically investigated in the framework of the phenomenological generalized hydrodynamic model. The basic equations are reduced to a modified/nonplanar nonlinear Schrödinger equation (mNLSE) using a reductive perturbation method. The existing regions of instability structures have been carefully identified. For studying the propagation of rogue waves in case of nonplanar (cylindrical and spherical coordinates), the mNLSE has been solved numerically. The effects of nonplanar geometries on the basic features of the DAFWs for the first- and second-orders rogue waves are discussed. Finally, our results are of relevance in ultradense situations where nonplaner geometrical effects are significant. In particular, we expect for our findings to be important to understand the DA breathers experimentally in a strongly coupled dusty plasma.     

Electrochemical Modulation of the Fluorescence of Cyanine Dye Cy5

Organic fluorescent dyes are widely used in single molecule localization microscopy, where their performances are determined by the photophysical properties. Herein, we utilized a sensitive method to modulate the fluorescence of organic dyes by external potentials using a combination of electrochemical cell and super‐resolution fluorescent microscopy. Cy5 (cyanine dye) was chosen as a model molecule considering its wide application and commercial availability. We applied different potentials on the Au electrode to change the Coulombic charge microenvironment of Cy5. When the electrode potential was adjusted negatively, Cy5 displayed a better photostability. This method is proved effective in adjusting the fluorescence of organic dyes.     

氧化石墨超声时间对三维还原氧化石墨烯结构及超级电容性能的影响

将氧化石墨凝胶超声不同时间制备氧化石墨烯(GO)溶胶,再以GO溶胶为前驱体采用一步水热法制备了三维还原氧化石墨烯(3DRGO),采用X射线衍射(XRD)、拉曼光谱、原子力显微镜(AFM)、扫描电子显微镜(SEM)和电化学测试等研究了不同超声时间对3DRGO的形貌、结构及超级电容性能的影响.结果表明,当超声时间不超过120 min时,经水热反应后还原氧化石墨烯均能形成稳定的三维结构,但随着超声时间的延长,三维结构尺寸不断减小,强度增加,样品的内部结构也由片状逐渐向多孔网状转化;当超声时间超过120 min时,还原氧化石墨烯虽具有网状结构,但在宏观上不利于形成稳定的三维结构.电化学测试结果表明,经不同超声时间所制备的还原氧化石墨烯均表现出较好的超级电容性能,其中超声时间为120 min时制备的3DRGO具有更均匀的多孔网状结构,表现出了最佳的超级电容性能,在1 A/g电流密度下其比电容可达328 F/g,即使在20 A/g的大电流密度条件下,其比电容仍可高达240 F/g.     

陕北晋西砂黄土的胶结物与胶结作用研究

在野外调查的基础上,采用SEM、XRD、土壤物理和土壤化学等方法,对陕北晋西12个县市的48个马兰黄土样品进 行了全分散法粒度组成测定、聚集体分析以及黄土胶结物组成的测试分析。结果表明,砂黄土中的粘土矿物和超细碳酸盐、 游离氧化物和有机质等胶结物质主要是以聚集体包膜的形式存在于碎屑颗粒表面,并构成砂黄土骨架间的结构联结,具有弱 胶结特性。砂黄土中粘土矿物和有机质为非水稳性胶结物质,仅在干燥状态具有较弱的胶结作用;黄土中的CaCO3呈粗颗粒 骨架和细分散超细碳酸钙两种形式存在,并分别起着骨架作用和胶结作用,超细碳酸钙为不可逆的胶结材料,在聚集体形成、 保存以及聚集体与碎屑颗粒之间的联结方面发挥着重要作用;非晶质游离氧化物(SiO2、Fe2O3、Al2O3)含量虽低,但由于他们 是以薄膜形式分布在颗粒表面,在黄土胶结作用中也是不可忽视的,并与上述各种胶结物共同起作用。通过统计分析认为, 凝聚系数可以较好地反映黄土的胶结程度,成为联系黄土胶结特性与黄土物理力学性质之间的桥梁。黄土胶结物组成及其 胶结机理的研究不仅有助于深化砂黄土工程特性的认识,而且对揭示黄土高原表生地球化学环境具有重要意义。     

A fluorescence toolbox: A review of investigation of electrophoretic separations,process, and interfaces

This review focuses on fluorescence spectroscopy techniques for the investigation of electrophoretic separations. Fluorescence has been used as a sensitive detector for capillary, gel, and microchip electrophoresis for decades. However, advanced fluorescence methods can be used to study transport, interfacial phenomena, intermolecular and affinity interactions, and other processes that occur during separation. This so‐called spectroscopic toolkit can be implemented to understand fundamental behavior in electrophoresis and electrokinetic chromatography. Techniques such as fluorescence recovery after photobleaching, fluorescence correlation spectroscopy, and fluorescence anisotropy are discussed in relation to electrophoretic separations. Newer methods such as super‐resolution microscope are also introduced.     

Learning-based compressed sensing for infrared image super resolution

This paper presents an infrared image super-resolution method based on compressed sensing (CS). First, the reconstruction model under the CS framework is established and a Toeplitz matrix is selected as the sensing matrix. Compared with traditional learning-based methods, the proposed method uses a set of sub-dictionaries instead of two coupled dictionaries to recover high resolution (HR) images. And Toeplitz sensing matrix allows the proposed method time-efficient. Second, all training samples are divided into several feature spaces by using the proposed adaptive k-means classification method, which is more accurate than the standard k-means method. On the basis of this approach, a complex nonlinear mapping from the HR space to low resolution (LR) space can be converted into several compact linear mappings. Finally, the relationships between HR and LR image patches can be obtained by multi-sub-dictionaries and HR infrared images are reconstructed by the input LR images and multi-sub-dictionaries. The experimental results show that the proposed method is quantitatively and qualitatively more effective than other state-of-the-art methods.     

Electrochemical devices obtained from biochar: Advances in renewable and environmentally-friendly technologies applied to analytical chemistry

Biochar is the carbon-rich material produced from organic feedstock such as agricultural wastes and municipal solid waste in limited oxygen atmosphere and under certain thermal combustion. Due to its high carbon content, high cation exchange capacity, large surface and stability structure, it has been applied in different field of knowledge. In relation to environment analytical chemistry the studies about biochar majorly focus in degradation of contaminants and soil and water remediation. However, due to its excellent electrical conductivity, biochar has been also applied to the manufacture of sensitive, robust, efficient and inexpensive devices applied to supercapacitor-based energy storage and chemically modified electrodes or sensors. Therefore, this review describes about obtention, modification and characterization of biochar as well as the pertinent aspects of electrochemical devises based on biochar and a general discussion about the environmental concern of biochar, challenges and prospects.     

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

Objective and subjective evaluations of the multi-channel auralization technique as applied to solo instruments

Auralizations are commonly used today by architectural acousticians as a tool to model acoustically sensitive spaces. This paper presents investigations employing an auralization methodology known as multi-channel auralizations, to determine the benefits of using an increasing number of channels in such auralizations. First an objective evaluation was conducted to examine how acoustic parameters, such as reverberation time, vary when using “quadrant” (one fourth of a spherical source) or “thirteenth” sources to create the binaural room impulse responses. Large differences in the values were found between the different sections of the sphere, on the order of several just noticeable differences. Two subjective studies were then pursued, first to determine if auralizations made with an increasing number of channels sound more realistic and have an increased perceived source size, using solo musical instruments of varying directivity indices as the sources. Overall, subjects perceived the auralizations made with an increasing number of channels as more realistic, whereas results for perceived source size are less clear. The second subjective study assessed the ease with which subjects could identify the source orientation from the auralizations as a function of number of channels. Results indicate that more channels made it easier for subjects to differentiate between source orientations.