白云石制备似立方体状方解石型碳酸钙晶体及其机理研究

以轻烧白云石粉、氯化铵和二氧化碳为原料,在未使用晶型控制剂的情况下,通过蒸氨-沉钙过程制备出了似立方体状碳酸钙。研究了反应温度、溶液中钙离子浓度、通气速率、搅拌速度以及陈化时间对碳酸钙中方解石相含量以及晶体形貌的影响,并探索了沉钙反应的晶型控制机理。结果表明,在反应温度40 ℃、钙离子浓度0.05 mol/L、通碳速率100 mL/min、搅拌速度400 r/min和陈化时间2 h的条件下,制备出形貌规整、粒径分布均匀的似立方体状碳酸钙,平均粒径为5~10 μm。该研究为提升白云石的使用价值、生产高附加价值的碳酸钙产品,以及提高白云石资源的利用率提供理论基础。     

Thermodynamic properties of gaseous cerium phosphate studied by Knudsen effusion mass spectrometry

Gaseous CePO₂ has been identified by Knudsen effusion mass spectrometry during vaporization of CeO₂ and magnesium diphosphate from tungsten double, two‐temperature effusion cell. Structure and molecular parameters of gaseous cerium phosphate under study were determined using quantum chemical calculations. On the basis of equilibrium constants measured for gas‐phase reaction, standard formation enthalpy of CePO₂ was determined to be ?508 ± 41 kJ ? mol^?1 at the temperature 298 K.     

某些分析化学实验教材中均相沉淀概念的误区

目前，均相沉淀法在大学分析化学实验中已很少采用。高锰酸钾间接滴定法测定钙含量是大学分析化学实验中的经典实验之一，历史上存在均相沉淀法和传统沉淀法2种不同的沉淀操作。虽然我国现有大学分析化学实验中已不采用均相沉淀法进行该实验，但在某些分析化学实验教材中，却存在概念混乱的现象，即把传统沉淀法称作均相沉淀法。对这种现象进行了探讨和总结。     

水化硅酸钙纳米压痕分子动力学模拟方法优化

针对水化硅酸钙纳米压痕模型忽视了压头与基底之间相互作用的问题，由尺寸差异引起的金刚石压头难以计算的问题，以及Wittmann模型无法得到实际接触面积的问题，提出了新的模型与计算方法．结合分子动力学方法，采用金刚石压头-Wittmann模型基底的组合方式构建无定形态水化硅酸钙纳米压痕试验模型．在建模阶段，考虑到压头模型与基底模型粒子间尺寸差异，提出了等比例替换模型，通过公式推导并就不同尺寸模拟结果验证了等比例替换模型的可行性．在计算阶段，提出了局部前处理的弛豫方法进行模拟．确定最大荷载位置处的接触面积为546 nm2，进而求出水化硅酸钙模型硬度H为0.84 GPa、折合模量Er为30.52 GPa．并通过纳米压痕试验，验证了模拟结果的准确性，证明了模型的科学性，对今后水化硅酸钙(C-S-H)纳米层面的模拟具有重要借鉴意义．     

Co3+-Rich Na1.95CoP2O7 Phosphates as Efficient Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions in Alkaline Solution

Implementing sustainable energy conversion and storage technologies is highly reliant on crucial oxygen electrocatalysis, such as the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, the pursuit of low cost, energetic efficient and robust bifunctional catalysts for OER and ORR remains a great challenge. Herein, the novel Na-ion-deficient Na_2−xCoP₂O₇ catalysts are proposed to efficiently electrocatalyze OER and ORR in alkaline solution. The engineering of Na-ion deficiency can tune the electronic structure of Co, and thus tailor the intrinsically electrocatalytic performance. Among the sodium cobalt phosphate catalysts, the Na_1.95CoP₂O₇ (NCPO5) catalyst exhibits the lowest ΔE (E_J10,OER−E_J−1,ORR) of only 0.86 V, which favorably outperforms most of the reported non-noble metal catalysts. Moreover, the Na-ion deficiency can stabilize the phase structure and morphology of NCPO5 during the OER and ORR processes. This study highlights the Na-ion deficient Na_2−xCoP₂O₇ as a promising class of low-cost, highly active and robust bifunctional catalysts for OER and ORR.     

Influence of pyridine oximate and quaternized pyridinium oximate ions on the hydrolysis of phosphate esters in cationic microemulsions

Kinetic studies have been performed to understand the hydrolytic potencies of oximate (2- and 4-pyridinealdoxime) and its functionalized oximate (4-(hydroxyiminomethyl)-1-alkylpyridinium bromide) ions (alkyl?=?C₁₀H₂₁ (4-C₁₀PyOx^-); alkyl?=?C₁₂H₂₅ (4-C₁₂PyOx^-)) in the cleavage of phosphate esters, diethyl p-nitrophenylphosphate (Paraoxon) and p-nitrophenyl diphenyl phosphate (PNPDPP) in a cationic (O/W) microemulsion system (ME) over a pH range 7.5 to 11.0 at 300?K. The k_obs values for the reaction of paraoxon with oximate and its functionalized oximate were determined in different microemulsion composition and the kinetic rate data shows that k_obs values increases with increasing water content. The specificity of different chain length of alcohols (n-butanol, n-pentanol, n-hexanol and n-octanol) was also investigated in hydrolytic reactions of paraoxon for different microemulsion composition.     

Novel tantalum phosphate Na13Sr2Ta2(PO4)9: synthesis,crystal structure,DFT calculations and Dy3+‐activated fluorescence performance

A new tantalum phosphate, tridecasodium distrontium ditantalum nonaphosphate, Na₁₃Sr₂Ta₂(PO₄)₉, was prepared using the high‐temperature flux method. The structure can be described as a three‐dimensional open framework containing isolated [Ta^V₂(PO₄)₉]¹⁷⁻ units that are interlocked by Na and Sr ions. Band structure studies by the first‐principles method revealed that Na₁₃Sr₂Ta₂(PO₄)₉ is an insulator with an indirect band gap of 4.78 eV, which makes it suitable as a luminescent host matrix. A series of solid solutions, i.e. Na₁₃Sr_2–xTa₂(PO₄)₉:xDy³⁺ (x = 0.01, 0.02, 0.04, 0.06, 0.08, 0.1, 0.12 and 0.14), were prepared and their photoluminescence properties studied. Under 350 nm light excitation, these emit two typical emissions of the Dy³⁺ ion, i.e. the ⁴F_9/2→⁶H_15/2 transition centred at 476 nm and the ⁴F_9/2→⁶H_13/2 transition centred at 570 nm.     

Yolk‐Shell Porous Microspheres of Calcium Phosphate Prepared by Using Calcium L‐Lactate and Adenosine 5′‐Triphosphate Disodium Salt: Application in Protein/Drug Delivery

A facile and environmentally friendly approach has been developed to prepare yolk‐shell porous microspheres of calcium phosphate by using calcium L ‐lactate pentahydrate (CL) as the calcium source and adenosine 5′‐triphosphate disodium salt (ATP) as the phosphate source through the microwave‐assisted hydrothermal method. The effects of the concentration of CL, the microwave hydrothermal temperature, and the time on the morphology and crystal phase of the product are investigated. The possible formation mechanism of yolk‐shell porous microspheres of calcium phosphate is proposed. Hemoglobin from bovine red cells (Hb) and ibuprofen (IBU) are used to explore the application potential of yolk‐shell porous microspheres of calcium phosphate in protein/drug loading and delivery. The experimental results indicate that the as‐prepared yolk‐shell porous microspheres of calcium phosphate have relatively high protein/drug loading capacity, sustained protein/drug release, favorable pH‐responsive release behavior, and a high biocompatibility in the cytotoxicity test. Therefore, the yolk‐shell porous microspheres of calcium phosphate have promising applications in various biomedical fields such as protein/drug delivery.     

地尔硫卓的合成工艺改进

以对甲氧基苯甲醛和氯乙酸甲酯为原料,经Darzens缩合、环氧开环、酒石酸拆分、环合、N-烃基化、O-乙酰化、成盐等7步反应制得地尔硫卓盐酸盐,其结构经~1H NMR,IR,MS(ESI)和元素分析确证。     

CaII Binding Regulates and Dominates the Reactivity of a Transition‐Metal‐Ion‐Dependent Diesterase from Mycobacterium tuberculosis

The diesterase Rv0805 from Mycobacterium tuberculosis is a dinuclear metallohydrolase that plays an important role in signal transduction by controlling the intracellular levels of cyclic nucleotides. As Rv0805 is essential for mycobacterial growth it is a promising new target for the development of chemotherapeutics to treat tuberculosis. The in vivo metal‐ion composition of Rv0805 is subject to debate. Here, we demonstrate that the active site accommodates two divalent transition metal ions with binding affinities ranging from approximately 50 nm for Mn^II to about 600 nm for Zn^II. In contrast, the enzyme GpdQ from Enterobacter aerogenes, despite having a coordination sphere identical to that of Rv0805, binds only one metal ion in the absence of substrate, thus demonstrating the significance of the outer sphere to modulate metal‐ion binding and enzymatic reactivity. Ca^II also binds tightly to Rv0805 (K_d≈40 nm ), but kinetic, calorimetric, and spectroscopic data indicate that two Ca^II ions bind at a site different from the dinuclear transition‐metal‐ion binding site. Ca^II acts as an activator of the enzymatic activity but is able to promote the hydrolysis of substrates even in the absence of transition‐metal ions, thus providing an effective strategy for the regulation of the enzymatic activity.